kawasaki 1999 ZX-6R Ninja Logo

Related Tags:

Problem with kawasaki 1999 ZX-6R Ninja

My 99 zx6r one day blew the main fuse and bike went dead,I replaced the fuse and working again.,5 miles later blew again and every time I put a new 30 amp in and put the cap on it just blew every

time,eventually after twisting some wires the fuse diddn't blow and all was fine.The next day I went to start the bike and it is now completely dead,no electrics but the fuse isn't blown,please please help me.

Posted by avatar on Aug 27, 2011

Suggested Solution (3)

then your stator or regulator is bad on your bike.

  • by Author image SicWyldNTwiz Over a year ago

Source: I have a 2007 VN 900 bike has approx 11500 miles

Was this solution helpful?

No

Yes

Hi
Some thing is expanding with heat or moving slightly to cause a dead short
if the solenoid click when the fuse blows I would suspect the starter motor brushes / wiring, insulating washer on lead from solenoid or the starter motors internal components

Ride Safe
Bike-Doc

  • by Author image Bike-Doc Over a year ago

Source: sometimes, after the bike has

Was this solution helpful?

No

Yes

you have a short somewhere. check all the wiring tosee if any of them have bare spots(exposed wire) or if one the battery cables is toutching the frame.

  • by Author image derek82 Over a year ago

Source: 2008 KLR650 - Main Fusing Blowing

Was this solution helpful?

No

Yes

Tips for Helping mooncat1970 With Their Issue
  • Give detailed step-by-step instructions
  • A picture or video is helpful
  • Use plain language not industry jargon
  • Check spelling & punctuation
Hide Tips

Add Your Solution

kawasaki 1999 ZX-6R Ninja Unsolved Problems

See all kawasaki 1999 ZX-6R Ninja Problems