Trying to disarm META M357T with pin but having no joy can you help? Have instruction leaflet and correct number

2 Related Answers

barryjmc

3 Answers
Posted on Apr 03, 2010

SOURCE: I have a META M357T bike alarm that will not

I have just today had the same prob when I briefly disconnected the battery to clean the terminals. When I connected the battery again the flahers went off but not the siren, couldn,t get the flashers to stop unless I disconnected one terminal on the battery but even then I could hear the alarm ticking.Tried he solution already suggested to you but as soon as I touched the turn switch the siren sounded. Silenced this by pressing the fob & that seemed to reset the system. At least it,s silent now & nothings flashing.Trouble is my battery is now pretty flat so difficult to know if the prob is actually cured. Hope this helps. Nothing to lose by giving it a go.If you find out more would you let me know. Thnx. Barry

Azrael SRL

11800 Answers
Posted on Aug 07, 2011

SOURCE: how to fit alarm SUZUKI

Just get this http://bit.ly/oqBPjw
it will come with the manufacturer's instructions.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0answers

Hi I have 2003 R1 just removed meta alarm and left with bout 9 loose black n green wires all electrics work but no spark to plug can you help please do I need to join some wires?

Read full answer

Be the first to answer Jun 22, 2017 • 2003 Yamaha YZF-R1

0helpful

1answer

I HAVE A META M357T V2 ALARM FITTED TO MY KAWASAKI 1200R NINJA 2004 IMMOBILISER WORKING BUT NO ALARM ANY IDEAS WHAT IS CAUSING THIS AND HOW I CAN PUT IT RIGHT

hi

you need the wiring diagram and then you need to check if each wire is still connected to the right part

also you may need to check the fuses are ok

and check the harness and loom and make sure every thing is connected

aries

Read full answer

Oct 11, 2013 • Vehicle Parts & Accessories

0answers

I bought an 2001 r6, with an alarm,that i want to remove

Read full answer

Be the first to answer Apr 27, 2012 • 2001 Yamaha YZF-R6

1helpful

1answer

Connected all wires as instructed and when battery is hooked back up, siren just blast and remote wont stop it.

There are two reasons that the unit does not respond to the remotes: the antenna is not connected or, the remotes are not programmed to the system. Check to see if the antenna is hooked up. Next, make sure the remotes are programmed to the system. The next time you connect the battery, manually disarm the alarm by turning on the ignition then, press and release the programming button on the antenna.You should here one chirp(disarmed). Try to operate the unit with the remotes after the unit is disarmed.

Read full answer

Mar 19, 2011 • CA6550 Codealarm Remote Start Security...

0answers