I have a LifeSpan TR1000-SL that stopped running. We are getting an E1 error code and do not know what this means or how to fix it. Ayy help you could provide would be much appreciated. Thanks in advance.

Depends on what really.

Question moved from Cars category.

An E1 code just means that the console is not getting a reading from the reed switch (Speed Sensor).
Jun 30, 2021

Treadmill Error Codes and Troubleshooting - LifeSpan Fitness

https://www.google.com/search?q=E1+error+in+my+Fuel+Twelve+treadmill

..

Ask the manufacturer

Remove up and down liver moter cabel in mother board. And restart machine. Now ok e1 error.

Hello

yes, your correct this could be the lower board with the issue.
The lower board could have blown a fuse, which you can check and replace quite easily. If the fuse is good look for other burnt spots on the board. The lower board may need repairing/replacing.
If the machine stopped while in use (after about 10min) then you will have a few other problems to check. Try adding silicone spray under the belt and if this has already been done then the running belt may need replacing.

E1 is never a good thing...

gymWorld.net.au

abrupt shutdown of the belt as the motor control detect a sharp increase in drive
current and inmediately stop driving belt.Some situation as jamming the belt may cause this error.Without such abuse should be a cause for extreme care and analysis for some Tech.

2 reason:

1) Motor drive; possible faulty(Test)

2) motor control board : possible faulty(Test)

Watch this videos tips:
http://www.youtube.com/watch?v=qgb2TY3WCkg&feature=related
http://www.youtube.com/watch?v=-oeXTKqWECw&feature=related
http://www.youtube.com/watch?v=GPI6dFJCUA4
http://www.youtube.com/watch?v=bF3OyQ3HwfU&feature=related
http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitness
http://www.fixya.com/support/r10786838-test_procedure_dc_motor

Hi, same thing here when i had the problem. I called LifeSpan and was also asked to lubricate the belt and since then i have not experienced the problem again.. It seems you have to call LifeSpan again and ask of the technician to come down and check it out since the only solution to the problem is not working and helping....

Take care

Your problem might be that a magnet has fallen off. Here's an illustrated guide that should make fixing it child's play: http://fixmytreadmill.blogspot.com/2010/10/how-to-fix-treadmill-e1-error.html

Good luck.

Get In Touch with: PCE Fitness @ (877) 654-3837 x114 they should be able to help you. They are in Salt Lake City Utah

my lifespan treadmill has an error code e1