Tip & How-To about Motorcycles

How do I adjust the headlights on my cruiser

If you look at the front of the headlight, there are actually a couple of screws around the edge. These are your adjustment screws

Posted by on

Motorcycles Logo

Related Topics:

Related Questions:

1 Answer

want to know how to adjust the headlights on np200.lights are very low on road.


Shop manual will show this, but generally all cars have screw adjusters for headlamps. Older cars had them around edges of the front of the lens, newer cars usually have them under the hood near the lamps.

Jun 09, 2015 | Cars & Trucks

1 Answer

headlight adjustment


If you look at the front of the headlight, there are actually a couple of screws around the edge. These are your adjustment screws.

Mar 23, 2009 | 2004 Chrysler PT Cruiser

2 Answers

How do I adjust headlights on a Chrysler town and country 1996


Look around the edge of the headlight. You may have to pull a cover off from around the headlight if you cannot see them. Normally there are 2 screws that can be adjusted with a cross tip screwdriver. One screw on top of the light, and on on the side. Loosen the top screw to adjust down, tighten the screw to adjust up. If the side screw on the light is towards the inside, then loosen the screw to adjust towards the outside of the road and tighten it to adjust the light towards the inside of the road. If the screw is towards the outside of the light, then it is reversed. tighten to bring the light towards the edge of the road and loosen to bring the light towards the inside of the road. Hope this helps!

Nov 11, 2008 | 1996 Chrysler Town & Country

Not finding what you are looking for?

508 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Loading...