Suzuki 1991 GSX 600 F (Katana) Solutions
Solved Problems
-
I have a 1991 suzuki
You may have a shift fork or two starting to go bad. When a fork gets bent, it does not move the slider gear properly. When that happens,...
-
I have a 1991 Suzuki
If the motorcycle has been dormant for a while the I would fully suspect the fuel system is clogged with sediment. Gas over a period of time...
-
valve clearance 1990 suzuki 600 katana
Intake and exhaust: .004-.006 *Help me out. Rate me!
-
dropped bike on left side. leaking oil. is the
Yes If casing is damaged make sure the stator coils are OK Ride safe Bike-Doc Please mark this as very helpful (if it has...
-
idle is too high
Hi and welcome to FixYa, It would either be a carb problem or a vacuum leak. Pulldown the carbs for inspection, soaking & cleaning. ...
-
witch plugs go to witch wires on an 92 suzuki
This should help out. Please rate my answer. Thanks!
-
Do you have the service manual for a 1991 Katana
Try this site: www.onlinefreeebooks.net/automotive-machinery.../suzuki/
-
studdering problem when given gas
I think your right they are full of bull, I think they rejetted it to a larger jet which makes it stall out or studders at lower rpms. I...
-
how is the coils connection, in wich order must be
Hi and welcome to FixYa, Basically, seated on the bike, the left coil goes to cylinders 1 & 4, while the right ignition coil goes to 2...
-
1991 Suzuki GSX600F Katana
4 qts. of 10w/40, api classification sf,when you change engine oil w/ filter.
Fix-O-Meter
8,760
8,760 people have viewed this product
- 84 people asked about this product.
- 44 people found solutions for this product.
- 1 person has added this product.