<?xml version="1.0" encoding="us-ascii"?><rss version="2.0"><channel><title>2002 Moto Guzzi California 1100 EV Touring Motorcycle Support</title><link>http://www.fixya.com/motorcycles/p981795-moto_guzzi_california_1100_ev</link><description>Solved  technical support problems provided by FixYa users.</description><language>en-us</language><copyright>Copyright (c) 2007  FixYa, LTD.  All rights reserved.</copyright><webMaster>info@fixya.com</webMaster><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate><ttl>80</ttl><item><title>I have a 2003 Calif. EV. I left the bike for 2</title><link>http://www.fixya.com/support/t3746980-2003_calif_ev_left_bike_2</link><description>I have a 2003 Calif. EV. I left the bike for 2 weeks and found the battery was completely dead. I replaced it and when I turned it on the fuel pump made a different sound. The bike started and I drove it home from the storage unit. I left it sit for...</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>I have a 2003 Calif. EV. It misfires once in a</title><link>http://www.fixya.com/support/t3062719-2003_calif_ev_misfires_once_in</link><description>I have a 2003 Calif. EV. It misfires once in a while when I let off the throttle. I noticed that it does not have an oxygen sensor in the crossover. I got this bike used. Does it have an O2 sensor for that year?</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>clutch adjustment</title><link>http://www.fixya.com/support/t2777329-clutch_adjustment</link><description>clutch adjustment /hard to pull in</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>Gear</title><link>http://www.fixya.com/motorcycles/t1229283-moto_guzzi_california_1100_ev_touring</link><description>I was riding up from Sheffield today and i couldn't get my 2001 Cali in top gear</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>Oil</title><link>http://www.fixya.com/motorcycles/t1229285-moto_guzzi_california_1100_ev_touring</link><description>When i unscrewd the dipstick there was smoke comming out. Definately not steam. is it ok?</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>lafranconi competizione to cali ev80 2001</title><link>http://www.fixya.com/motorcycles/t1229286-moto_guzzi_california_1100_ev_touring</link><description>Someone have the lafranconi competizioni on california model. The sound is very different compared with the stock muffler?

If someone can record the sound of the california with lafranconi cometizioni I enjoy !</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>brakes</title><link>http://www.fixya.com/motorcycles/t1229284-moto_guzzi_california_1100_ev_touring</link><description>Right</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>tyres and pressures</title><link>http://www.fixya.com/motorcycles/t1229282-moto_guzzi_california_1100_ev_touring</link><description>I have a 2001 cali special with the alloy spoked tubless rims. Cant find anywhere what the pressures should be. Running at 34 front 36 rear as a guess.

I also have metzler tyres on and will have to change soon anybody experience what tyres are best...</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>Sportster Wheel Spacer positioning</title><link>http://www.fixya.com/motorcycles/t1698137-sportster_wheel_spacer_positioning</link><description>I have a 96 XL883 that needed tires. I've usually done all my own work with my trusty Clymer manual without a problem and, I'm just short of anal when it comes to placing items in reverse order of they way they go back together. This time, while...</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>water leak/mixing with oil</title><link>http://www.fixya.com/motorcycles/t1771191-water_leak_mixing_oil</link><description>water is leaking past the gear selector shaft on my 1987 yz 125 also the water is mixing with the gearbox oil i have drained the gearbox and the oil is milky any help with this would be great thanx heaps Gaz</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>would like to know if you need to wind the spring on kick starter</title><link>http://www.fixya.com/motorcycles/t1749025-like_know_need_wind_spring_kick_starter</link><description>Have a Yamaha Xt 350 would like to know if you need to wind the spring on the kick start shaft or is my spring need repalced? It doesn't take much to put it in the slot and then over the stud. but like that the kicker only comes up about half way. Is...</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>hi, i have a 2001 YZ250 and have been having a</title><link>http://www.fixya.com/motorcycles/t1766039-2001_yz250_having</link><description>hi, i have a 2001 YZ250 and have been having a slight problem at low revs, when i open the throttle up there seems to be a slight delay on speed pick up, this only lasts about 1 second and once ive reached mid range the bike is fine, however once i...</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>1987 Yamaha Riva XC200 turn signals</title><link>http://www.fixya.com/motorcycles/t1798569-1987_yamaha_riva_xc200_turn_signals</link><description>My turn signals light up but won't blind, bulbs ok. They may blink one time then just stay lit. both sides do this but ones on right just really stay lit and don't blink. I dont have a manual so cant find the ''flasher unit to replace. Does anyone...</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>need to know proper tie pressure for Harley</title><link>http://www.fixya.com/motorcycles/t1843691-need_know_proper_tie_pressure_harley</link><description>need to know proper tie pressure for Harley davidson 883L 2009 with a 137 lb. rider not loaded</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>Repair kick start on Yamaha XT 200</title><link>http://www.fixya.com/motorcycles/t1850517-repair_kick_start_yamaha_xt_200</link><description>I need a diagram, or instructions on how to replace/repair the kick start gear.</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>year for a older dirt bike</title><link>http://www.fixya.com/motorcycles/t1867359-year_older_dirt_bike</link><description>i have an older dirt bike and i cant seem to find the year anywere on the bike. i was told i could find out the year by the serial number. the serial number is 007562 and the vin number is 2w5-000971</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>change rear wheel on Harley Davidson</title><link>http://www.fixya.com/motorcycles/t1878251-change_rear_wheel_harley_davidson</link><description>1995 Harley Davidson Softail Classic</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>Coils Not Firing</title><link>http://www.fixya.com/motorcycles/t1900315-coils_not_firing</link><description>Head light does not come on until you cross jump silinoide I know that silniode is bad but it has'nt blown any fuses could igniter be bad I have no fire coming from coils</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>First time changing spark plugs on a '98 VMAX</title><link>http://www.fixya.com/motorcycles/t1911991-first_time_changing_spark_plugs_98_vmax</link><description>First time changing spark plugs on a '98 VMAX motorcycle. Looks like they're pretty tough to get to. Not much room. Any tips, do's or don't's? Thanks for your help!</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>1977 kawasaki kz 1000 problem</title><link>http://www.fixya.com/motorcycles/t1942671-1977_kawasaki_kz_1000_problem</link><description>when the bike gets hot I get a ticking sound in the motor,when it cools down it runs fine any answer to this problem Thanks Roy</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>need to figure outfuel line routingfrom tankto crbsandvacumeroute</title><link>http://www.fixya.com/motorcycles/t1952621-need_figure_outfuel_line_routingfrom</link><description>my bike was dissassembed i need t figure out which lines go to which on the carb to andfrom the tank and vacume toad fromt the head to the carbs as well i need to get y bike back home asap pleashelp me get my bike to where it will run good enough to...</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>engine is hunting at tickover</title><link>http://www.fixya.com/motorcycles/t1968583-engine_hunting_tickover</link><description>my 1983 GPz1100 unitrac is running rich without using fast idle,when the bike has been ridden and is ticking over it hunts between 1000 and 2000rpm,it is fine through the rest of the range, there is no warning lights to show that there is a fault...</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>my 1997 dirt bike wont start</title><link>http://www.fixya.com/motorcycles/t1977879-1997_dirt_bike_wont_start</link><description>i was riding my bike in second gear when it just stoped running. I think i over revved it. I did that once before and this time its not starting. Does anyone know what is wrong with it</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>brake lever travel</title><link>http://www.fixya.com/motorcycles/t2021005-brake_lever_travel</link><description>I have alot of play in my rear brakes...  Travel of brake lever befor brakes engage...  What can I do?</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>its been sitting the throttle is stuck shut , its not the cables</title><link>http://www.fixya.com/motorcycles/t2037705-its_sitting_throttle_stuck_shut_its</link><description>My honda interceptor 500 1985 was sitting now the throttle is stuck shut. its not the cables .
any Ideas?</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>Bike will not start after completely cleaning the carb.</title><link>http://www.fixya.com/motorcycles/t2052437-bike_will_not_start_after_completely</link><description>My Vstar 650 2005 Classic bike will not start. It is at the shop now, and they say they have cleaned the carb completely inside out, still won't start. Any help would be appreciated.</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>oil leaking from front cylinder</title><link>http://www.fixya.com/motorcycles/t2059971-oil_leaking_from_front_cylinder</link><description>oil leaking from front cylinder head, high on the front of the cylinder.above the horn.</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item><item><title>two 3/8 plugs under side of block next to the</title><link>http://www.fixya.com/motorcycles/t2085619-two_3_8_plugs_under_side_block_next</link><description>two 3/8 plugs under side of block next to the cam cover. what are they for? or is oil inside? 2006 harley davidson softail</description><pubDate>Thu, 07 Jan 2010 04:22:42 GMT</pubDate></item></channel></rss>