20 Most Recent 2002 Hyosung GV 250 Aquila Questions & Answers


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Hyosung, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sa=X&q=Carburetor+location+2002+Hyosung+GV250+Aquila&tbm=isch&source=univ&ved=2ahUKEwiate7duJ7iAhVkU98KHbS2Bq0QsAR6BAgIEAE&biw=1440&bih=757
hyosung gv250 carb balance with 2 bottle manometer
Hyosung Aquila 250 Service Manual
https://alpha-sports.com/Parts/H_GV250.htm?q=hyosung-parts
HYOSUNG GV250 User Manual

2002 Hyosung GV... | Answered on May 15, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Hyosung, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.epfguzzi.com/hyosung/parts/gv250_OEM.html
https://www.youtube.com/watch?v=YNaESFLYzk4
Hyosung Aquila 250 Service Manual
https://alpha-sports.com/Parts/H_GV250.htm?q=hyosung-parts
HYOSUNG GV250 User Manual

2002 Hyosung GV... | Answered on May 08, 2019


Time for carb cleaning , blow the jets with compressed air,check the float level.
Check the spark plug and replace if neccessary.
Check the air filter too, and if you don't have an 'inline' filter for your fuel line,install one.
Basically yr bike's engine needs a tune up...check the valve clearance too!
Hope this helps!

2002 Hyosung GV... | Answered on Oct 29, 2018


Hi, Yazalde ouch !!! first thing you want to do is check all of your fuses then check battery voltage and charge as necessary 12.5 volts next try and start the bike if it does not start you may have fried the ignition module for more information about your question and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
Dum mistake Hooked up jumpers backwards bike shows no sign of life
Battery hooked backwards
http://files.hyosungmotorsusa.com/GT125_250_Service_Manual.pdf
http://www.hyosung.com.au/downloads/manuals/GV250.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2002 Hyosung GV... | Answered on May 19, 2016


Front Tyre
110/90 -16

Rear Tyre
150/80-15

2002 Hyosung GV... | Answered on Mar 13, 2015


Your clutch works by being submerged in oil, check your oil level and make sure its touching the stick. If this is a rebuilt engine expect some oil consumption.

2002 Hyosung GV... | Answered on Aug 13, 2014


Hi David,
There is a few possibilities here.
The first, and probably least likely, is that your oil pump is having problems. These are generally fully mechanical though, and are unlikely to cause issue.
Another is a blockage in the oil system. but if you change your filters regularly, this shouldn't be an issue either.
It could be your oil pressure sensor, refer to your manual as to where this is located. Check the wiring first, sometimes it can be as simple as a loose wire. Otherwise replacing the sensor might solve the issue.
The next possibility is a little more complex. It's entirely possible you may have used the wrong oil viscosity in your engine. Using too thin an oil to what is specified will lower your oil pressure, but increase flow. Oil pressure is important though. Too little and the pump may not be pushing it through where it needs to go as well as it should.
It's possible that such thin oil and low pressure may be causing the oil pressure sensor to show no pressure and illuminate the globe on the dash?
Check your users manual to see what oil viscosity is recommended and if necessary change it to the correct oil.
Hopefully this gives you a few ideas on how to solve your problem?
Cheers.

- Matt from Australia

2002 Hyosung GV... | Answered on Feb 04, 2014


You have an electrical problem that will have to be traced back to the source. First, change one of the plugs and see if that solves it. If not, check your ignition coils. Make sure you have current going to the coils. If not, check your fuses and finally your ignition switch. Some small displacement motorcycles have magnetos to generate the power for the spark plugs and that may have become faulty.

2002 Hyosung GV... | Answered on Jul 29, 2013


yep same bike different years alpha sports and hyosung used to be one company then split in 04 alpha sports became tomberlin and hyosung became hyosung motors usa

2002 Hyosung GV... | Answered on Jul 20, 2013


Cut it off ... get a replacement that has a master link. You could invest in a chain breaker.

2002 Hyosung GV... | Answered on Jun 03, 2013


sounds like your carbs are out of sync.

2002 Hyosung GV... | Answered on Aug 17, 2012


locate the starter motor solenoide & hook up to the positive terminal there! & the earth to the engine or frame ok
Cheers Rob

2002 Hyosung GV... | Answered on Jun 10, 2012

Not finding what you are looking for?
2002 Hyosung GV 250 Aquila Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5851 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

richard libby

Level 2 Expert

202 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GV 250 Aquila Hyosung

  • GV 250 Aquila Hyosung

Most Popular Question

get plugs fire

  • Motorcycles
Loading...