20 Most Recent 2011 kawasaki Vulcan 1700 Voyager Questions & Answers


Hi, Katie1637 and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low or too high.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Any issues with overheating in traffic Kawasaki Vulcan Forum Vulcan Forums
American Voyager Association
Kawasaki VULCAN 1700 VOYAGER Service Manual
OEM Parts for Kawasaki
Kawasaki Vulcan 1700 Voyager Owner Manual

2011 kawasaki... | Answered on Sep 07, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2010 VV 1700 Gas Tank Removal Kawasaki Vulcan Forum Vulcan Forums
Vulcan Nomad removing the tank youtube
Kawasaki VULCAN 1700 VOYAGER Service Manual
OEM Parts for Kawasaki
Kawasaki Vulcan 1700 Voyager Owner Manual

2011 kawasaki... | Answered on Sep 01, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Axle nut torque spec Kawasaki Vulcan Forum Vulcan Forums
http://www.vulcangadgets.com/files/torquesettings.html
Kawasaki VULCAN 1700 VOYAGER Service Manual
OEM Parts for Kawasaki
Kawasaki Vulcan 1700 Voyager Owner Manual

2011 kawasaki... | Answered on Aug 15, 2018


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
FI light on with friends bike
Kawasaki Fault Codes
Kawasaki Vulcan 1700 Voyager ABS Service Manual
OEM Parts for Kawasaki
Kawasaki Vulcan 1700 Voyager Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 kawasaki... | Answered on Jan 19, 2018


Hi, Francis and the usual suspects are:
1. Clutch cable adjusted too tight.
2. Pressure plate center screw adjusted too tight
3. A broken clutch rod.
4. Slave cylinder piston stuck.
5. Clutch plate missing from the clutch pack.
6. Clutch plates have worn past minimum specifications.
7. Clutch plates crystallized due to incompatible oil.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
American Voyager Association
Clutch Warmup
Kawasaki Vulcan 1700 Voyager ABS Service Manual
OEM Parts for Kawasaki
Kawasaki Vulcan 1700 Voyager Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 kawasaki... | Answered on Sep 01, 2017


hello!!If you buy a motorcycle parts, need in motorcycle accessories, you can refer to the below website.
.http://www.motorpartstore.com.Good luck and have a nice day.

2011 kawasaki... | Answered on Apr 09, 2016


Hi Anonymous, I am sorry you can't find the first and best tool you ever bought for your Kawasaki but despair not for a mere $15.00 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
2011 Kawasaki Motorcycle Service Repair Workshop Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 kawasaki... | Answered on Oct 03, 2015


A smoked clutch or broken tranny shaft. Most likely the clutch.

kawasaki... | Answered on Jul 08, 2019


Hi, Chris the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.kawasakimotorcycle.org/forum/vintage-motorcyle-info/128338-1984-kawasaki-zn-700ltd-service-manual.html
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki
https://www.motorcyclespecs.co.za/model/kawasaki/kawasaki%20ZN%20700%20LTD%2084.htm
https://en.wikipedia.org/wiki/List_of_Kawasaki_motorcycles

kawasaki... | Answered on Jul 06, 2019


https://www.google.com gives a number of sites with manuals for sale.

Example below:

https://www.z1enterprises.com/motorcycles/kawasaki/kz250/maintenance-parts/manuals-books.html

kawasaki... | Answered on Jun 29, 2019


Was it running when it went under? If it was may need major work if engine swallowed water while running. Was it salt water or fresh. If it was not running when it went in you can drain all fluids and flush. Carbs or throttle bodies need to be removed and cleaned spark plugs pulled and checked for water. Once all cylinders are are free of water fog them and reasemble. Add new fluids and gas and try starting. If it is still drippin g water you will need for bike to completely dry. Hair dryer on low will help dry electronic controls. Do not over heat.

kawasaki... | Answered on Jun 27, 2019


Hi, Henry I would call Kawasaki 866-802-9381 because the VIN number indicates the bike was not made for the U.S. market for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.pwctoday.com/showthread.php?t=210810
https://faq.ninja250.org/wiki/Engine_number_and_year_of_manufacture
Kawasaki VIN Decoder get VIN Number Decode for any Kawasaki for free
http://www.thisoldtractor.com/mg_manuals/book_motorcycle_identification.pdf
https://en.wikipedia.org/wiki/Kawasaki_motorcycles

kawasaki... | Answered on Jun 10, 2019


This could be many things, wrong gaskets, wrong torque, warped heads, or improper installation.

kawasaki... | Answered on Jun 06, 2019


1. How do you know that there is water in a cylinder?
2. Check for spark. Harbor freight has a cheap spark checking tool.
3. Check for gas. Should be able to pull the fuel line off the injector pump and turn the key on. fuel should come out.

caution******dont do both at the same time
Most likely if it cranks (engine turns over) but doesn't start, one of the two above is not happening, although, it could also be an injector pump.

kawasaki... | Answered on Jun 04, 2019


That vintage of motorcycle I would be checking the plug wires and plug caps for breakdown. Find the darkest place at night, rev your engine and look for arcing from your wires to the engine. It's also time to check for any deterioration of rubber hoses and components. Beautiful bike you have there!!

kawasaki... | Answered on Jun 03, 2019


you can order one form any kawasaki dealer

kawasaki... | Answered on May 27, 2019


If the fuel isn't all over the floor, I'd be checking that your riding buddies aren't playing a prank. Otherwise, debris in inlet valve or bad valve or float.

kawasaki... | Answered on May 16, 2019

Not finding what you are looking for?
2011 kawasaki Vulcan 1700 Voyager Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5914 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

richard libby

Level 2 Expert

208 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

JL 125 T33 kawasaki

  • JL 125 T33 kawasaki

Most Popular Question

brand new vulcan voyager 1700

  • Motorcycles
Loading...