20 Most Recent 2011 Harley Davidson FLHTK Electra Glide Ultra Limited Questions & Answers


Hi, Larry "18 ft. lbs." for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram in the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
TC88 Series 21 How to install Harley rocker boxes gaskets BONUS How to... 2014 Harley Touring Service Manual pdf http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc 2014 Harley Davidson Ultra Limited Owner Manual Instant Repair Help over the Phone to speak to me personally $4

2011 Harley... | Answered on Nov 18, 2018


Hi, Mike usually around 1000 RPM otherwise the usual suspects are:
1. Faulty TPS-IAC-MAP-ETS-ISP sensor and or o-ring.
2. Throttle plate idle stop adjuster has shifted.
3. Throttle plate shaft cracked-broken-faulty o-rings.
4. Throttle body to cylinder head seals/gaskets leaking.
5. Throttle cables improperly adjusted-damaged-kinked etc.
6. Vacuum lines cracked or broken or missing.
7. Damaged or faulty spark plugs.
8. Dirty or damaged fuel injector.
9. Faulty fuel tuner or out of adjustment.
10. Service Bulletin TT 410 https://www.pdf-archive.com/2011/03/15/tt410/
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Correct Idle RPM Harley Davidson Forums
How to Use Harley Davidson Engine Idle Temperature Management System EITMS...
2011 Harley Touring Service manual pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
2011 Harley Davidson Electra Glide Ultra Limited Owner Manual
Instant Repair Help over the Phone to speak to me personally $4

2011 Harley... | Answered on Sep 13, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
2012 FLHTK Limited Problems and Perceptions Harley Davidson Forums
2012 Harley Touring Service Manual pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
2012 Harley Davidson Electra Glide Ultra Limited Owner Manual Instant Repair Help over the Phone to speak to me personally $4

2011 Harley... | Answered on Jul 21, 2018


Hi, Rickhall5372 if your bike has been sitting idle for months or years and you did not do any pre-storage maintenance I feel your pain it will probably have a dead battery and not want to start or if it starts it will not idle unless the choke is full on and run poorly then stall, here are the following steps necessary to complete in order to get your bike back to an acceptable running condition and in the future pour in a bottle of fuel stabilizer and injector cleaner for you FI folks at least 2 times a year and before storage.
1. If your battery was 2-3 years old when you last had the bike running you should replace it.
2. If you believe your battery might still be serviceable remove it from the bike and put it on a 1 or 2 amp trickle charger for 24 hours. If it is the old lead acid type with visible cells and acid levels fill each cell to the top line with distilled water and replace the caps, run the vent tube into a plastic or styrofoam cup, any cells that are cloudy/milky replace the battery.
3. After charging the battery remove the leads and let it sit for a couple of hours then check the battery voltage with a voltmeter, you should have 12.5 volts or more, any readings in the 11 volt range you need to do a proper "LOAD" test on the battery and replace as necessary, you may have 12.5 volts or better but little or zero amps, any readings in the 10 volt range you have a dead cell and the battery needs to be replaced.
4. Drain and flush fuel tank if it rusty there is a cheap and easy fix. https://www.youtube.com/watch?v=fUYr_7SwGms
5. Remove and inspect your air cleaner paper elements that are not oil soaked can be cleaned with a soft brush and low pressure compressed air, oil-soaked elements must be replaced. Gause mesh and foam elements can be cleaned by soaking them in a container big enough to completely cover them with a solution of 1 gallon of water and 1 oz. of Dawn dishwashing liquid for small and medium size elements, for monster size double the formula and let soak for at least one hour then rinse with warm water shake off excess and let air dry, "WARNING" do not use compressed air as this will embed micro-sized dirt and road grime and destroy the mesh pattern and stretch foam elements out of shape just squeeze it like a sponge and let air dry, use a fan if you're in a hurry. When completely dry spray a very fine mist of air filter oil evenly around the whole element.
6. Remove the carburetors, disassemble and decontaminate with a "CARB DIP" or if you have EFI remove injectors and clean with carb spray and compressed air
7. Check intake manifold and seals for leaks and craks.
8. Remove fuel valve and filter disassemble and clean as necessary, remove, clean, and inspect fuel and vacuum lines and replace as necessary.
9. Replace spark plugs with new ones and check for spark.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Motorcycle Views
Harley Davidson Touring Workshop Service Repair Manual 2013
$13 cheap includes a $60 electrical diagnostic manual FREE
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
2013 Harley Davidson Electra Glide Ultra Limited Owner Manual
Instant Tech Relief To speak to me personally absolutely "FREE"

2011 Harley... | Answered on Nov 15, 2017


Hi, Mark no it's not an ignition coil it's the tiny coil inside your System Relay which should be located next to your Starter Relay,
there is a wiring diagram in the back of the free service manual below, for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Harley Diagnostic Codes 04 Present DG Custom Cycle
http://proudfewmc.net/SiteAssets/99483-11.pdf Service Manual
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
2013 Harley Davidson Electra Glide Ultra Limited Owner Manual
Instant Tech Relief To speak to me personally absolutely "FREE"

2011 Harley... | Answered on Jun 12, 2017


Hi, David the answer to this question is way above my pay grade that being said I believe it is 50mm and for this situation, I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
Throttle body 50mm or 58mm Harley Davidson Forums
Harley Davidson Touring Workshop Service Repair Manual 2016 $10 cheap
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://www.harley-davidson.com/content/h-d/en_US/home/owners/maintain-your-bike/owners-manual.html
Instant Tech Relief To speak to me personally absolutely "FREE"

2011 Harley... | Answered on May 08, 2017


Plug wire bad..maybe should inspect all..lookgood on outside

2011 Harley... | Answered on Nov 16, 2016


Hi, Jeff start by checking all your fuses also for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below and for specific information or questions please feel free to contact me at xlch@mail.com. Good luck and have a nice day.
2014 Street Glide radio not turning on Twin Forum Harley Davidson Forums
Harley Diagnostic Codes 04 Present DG Custom Cycle
Self Diagnostics for Harman Kardon radios Harley Davidson Forums
Harley Davidson Manuals Mark Workshop
http://www.stcharlesharleydavidson.com/OEMpartfinder.htm
Owner Manuals Harley Davidson USA
Instant Tech Relief A must have !!! only $6 a month "CHEAP"

2011 Harley... | Answered on Jul 14, 2016


Hi Anonymous, perform the following tests:
1. Fill acid type batteries to proper levels.
2. Charge battery overnight at 1-2 amps you need 12 volts or better after charging.
3. Make sure all connections are clean and tight especially the negative cable at both ends.
4. Hook up volt meter to battery and start engine, if meter falls below 9.5 v replace battery.
5. With engine running at 3600 RPM battery should read 14.3-14.7 volts if not continue tests.
6. Unplug voltage regulator from alternator at crankcase by front of primary cover.
7. To test voltage regulator go to: https://www.youtube.com/watch?v=F8EjV0IjW9Q
8. With ohm meter, one lead grounded, touch alternator pin meter should read infinity, if not replace stator.
9. With ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator.
10. With volt meter set on AC scale, both leads touching alternator pins meter should read
16 to 20 volts AC for every 1000 RPM'S 1989 and later and 19 to 26 volts AC for every 1000 RPMS. If not replace rotor. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 Harley... | Answered on Apr 19, 2016


Hi Curt, try checking the tour pack wiring harness where it connects to the main wiring harness at the connector for corroded, broken, or loose pins/sockets, continuity and make sure you have good clean ground. If you still can't find the short, please contact me at xlch@mail.com. Good luck and have nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 Harley... | Answered on Jan 26, 2016


Hi Anonymous, how much does your friend weigh? Have nice day

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 Harley... | Answered on Jun 26, 2015


Hi Thomas, for more information about your question please visit the websites below. Good luck and have nice day.
2009 Harley FSXTC Speed sensor removal and replacement part

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2011 Harley... | Answered on Jun 24, 2015


Hi Klberrett, for more information about your question please visit the websites below. Good luck and have nice day.
Motorcycle Brake Repair Replacing Bleeding Front Brake Fluid on 2008...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2011 Harley... | Answered on Jun 24, 2015


Hi Gary, you can either take it back to the dealer or try an alarm reset, for more information about your question please visit the websites below. Good luck and have nice day.
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2011 Harley... | Answered on Jun 24, 2015


Hi Anonymous, 4 out of 5 Harley Gods give this one a thumbs up, but just to be on the safe side contact your local dealers service/parts department for confirmation. Good luck and have nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 Harley... | Answered on Jun 24, 2015


Hi Rich, I'm sorry but I just loaned my listening ears to the lead technician at your local Harley Dealer so he could take your bike for a test ride and evaluate the noise. Good luck and have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 Harley... | Answered on Jun 24, 2015


Hi Lorena, and the usual suspects are:
1. Insufficient oil supply or oil not circulating.
2. Insufficient air flow over the engine.
3. Heavy carbon deposit in combustion chamber.
4. Ignition timing retarded due to faulty MAP, CKP and/or CMP sensors.
5. Leaking intake or exhaust valve.
6. No oil cooler.
7. Normal engine oil tempurature 180-220 degrees.
Good luck and have nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 Harley... | Answered on Jun 24, 2015


Hi Kevin71406, for more information about your question please visit the websites below. Good luck and have nice day.
Motorcycle Repair How to Replace the Battery on 2008 Harley Davidson Road...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2011 Harley... | Answered on Jun 24, 2015


Hi Anonymous, 1992 and later Touring Models, fuel pump fuses and relays will be behind the right side panel, starter and ignition relays will be under the seat behind the battery, everything else will be behind the left side panel to access fuses pull back on the front two locking tabs and slide the cover up. Good luck and have nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2011 Harley... | Answered on Jun 24, 2015

Not finding what you are looking for?
2011 Harley Davidson FLHTK Electra Glide Ultra Limited Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Gar
Gar

Level 2 Expert

384 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5914 Answers

Mike

Level 3 Expert

4357 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

STM 50 Harley Davidson

  • STM 50 Harley Davidson

Most Popular Question

2011 flhtk correct rpm idle

  • Motorcycles
Loading...