20 Most Recent 2010 Sym Joyride 200i Evo Questions & Answers

I can't open fuel cap.all the rest is ok

2010 Sym Joyride... | Answered on Dec 16, 2018

is not by braided strap from chassis to frame it can often be grounded through conductive bolts and fasteners. is many cases dc current is a closed system and simply internalizes and delivers ground to all required electronics through shielded conventional wire usually black or grey.

Sym Motorcycles | Answered on Feb 10, 2019

As for me, advices from https://justbuyessay.com/blog/how-to-create-excellent-leadership-essay will be useful for students. Here you can learn a lot about leadership essay writing

Sym Motorcycles | Answered on Jan 15, 2019

The older the engine, the more likely it is to leak oil due to aging gaskets and seals. As an engine ages, heat can cause cork gaskets to harden and shrink.Engine oil leaks occur most often at the valve cover and oil pan gaskets, timing chain cover and the front and rear crankshaft seals. on your Mio Better Check all necessary Seals and gaskets

Sym Motorcycles | Answered on Nov 08, 2018

Pretty much all the Honda CG125 engines will fit, from Kymco, Wuyang etc. Just google CG125 engine and loads will pop up..

Sym Motorcycles | Answered on Oct 03, 2018

You must do some tests first.

Sym Motorcycles | Answered on Aug 30, 2018

The clutch is a mechanical connection of the engine to the drivetrain. It would not cause what you are describing. This is either an ignition issue or a problem with the intake. Intake problem could be anything from valves to fuel supply

Sym Motorcycles | Answered on Jul 06, 2018

Hi, James it should be noted that the "AIR FUEL" mixture screw adjustment "ONLY" manages your idle and has no effect on any other circuit also any intake leaks must be repaired before the A/F adjustment procedure can be performed otherwise you will never obtain a proper idle and you will waste a lot of time chasing the impossible. The A/F mixture screw's purpose is to fine tune the fuel charge entering the combustion chamber. The following applies to both 2 and 4 stroke engines:
1. The mixture screw may be sealed at the factory with a Welch Plug please review the following video for removal.
2. The mixture screw manages a range of 3 complete 360-degree counterclockwise turns from the bottom/closed position.
3. The mixture screw should have a spring and o-ring for tension and sealing integrity.
4. Turn the mixture screw clockwise until it gently bottoms out, this makes the fuel charge very lean and the engine should not idle if it does then the pilot/idle jet is too big and needs to be replaced with the next size smaller.
5. Turn the mixture screw 1 and 1/2 turns counterclockwise to establish a baseline for starting the engine.
6. To fine-tune the idle circuit, adjust the mixture screw 1/4 turn in or out to achieve maximum idle RPM, wait 15 seconds between each adjustment for the idle to settle.
7. Never go past 3 full turns out this will make the fuel charge rich, foul plugs, and produce black smoke out of the exhaust, if the engine RPM keeps increasing past 3 turns the pilot/idle jet is too small and needs to be replaced with the next size larger.
8. After achieving maximum idle back out the mixture screw another 1/8 of a turn then adjust the throttle cable idle stop screw to 950-1050 RPM.
9. This procedure works great on 99% of all engines, for the 1% that demand a more robust throttle response on aftermarket monster fuel delivery systems additional tweaking outside the box may be necessary.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to Adjust Your Scooter Engine Idle Speed QuikrCars Do It Yourself...
Carburator Theory and Tuning
http://www.family-motorsports.net/GY6-50cc-150cc.pdf free service manual
Spart Parts Sym Scooters Melbourne
http://www.sym-global.com/uploadfile/download/20140311030342.pdf free owners manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sym Motorcycles | Answered on May 01, 2018

Not finding what you are looking for?
2010 Sym Joyride 200i Evo Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Sym Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5809 Answers


Level 3 Expert

83940 Answers


Level 3 Expert

5521 Answers

Are you a Sym Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tre 1130K Amazonas Sym

  • Tre 1130K Amazonas Sym

Most Popular Question

cannot open fuel cap sym200i evo

  • Motorcycles