2008 Yamaha XT125R - Answered Questions & Fixed issues


Hi, Tem for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
YZFR 125 OIL SERVICE LIGHT RESET OIL WARNING LIGHT RESET OIL WARNING
Yamaha XT 125
YAMAHA XT125R XT 125R BIKE WORKSHOP SERVICE REPAIR MANUAL Download Manuals... $10
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xt-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



2008 Yamaha... | Answered on Jun 08, 2017 | 357 views


Hi, Bugdude63 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
yamaha xt125r
YZFR 125 OIL SERVICE LIGHT RESET OIL WARNING LIGHT RESET OIL WARNING
Yamaha XT 125R 2005 Service Information
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xt-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2008 Yamaha... | Answered on May 15, 2017 | 76 views


Hi, Pelias11 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha xt125r wiring diagram Google Search
Yamaha Motorcycle Wiring Diagrams
Yamaha XT 125R 2005 Service Information
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xt-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2008 Yamaha... | Answered on May 06, 2017 | 106 views


Hi, Sam_kellick I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Chains---RATTLE
5. Clutches---CHATTER
6. Cylinders---PING
7. Fronk Forks---Plunk
8. Gears---WHINE
9. Head Gasket---HISS
10. Hydraulic Lifters---TAP
11. Pistons---SLAP
12. Rear Shocks---SQUEAK
13. Shifting Trans---CLUNK
14. Solid Lifters---TICK
15. Starters---CLICK
16. Connecting Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Strange Knocking Noise In First Gear Clutch Drag
How to diagnose problem by the noises your bike makes
http://gigi600.altervista.org/immagini/xt125r/XT%20125%202005_service.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xt-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2008 Yamaha... | Answered on Feb 03, 2017 | 43 views


If there is no manual "reserve" position on the fuel valve, then the warning light serves the same purpose and tells you to go get some more fuel.

2008 Yamaha... | Answered on Jan 05, 2016 | 66 views


The common wire is always ground or negative with no power. I suspect a broken earth wire.

Yamaha Freedom... | Answered on Jul 28, 2017 | 62 views


Kick stand up or down,clutch in or out? Tranny in neutral with neutral lamp on? Did it start after that one time or it hasn't since? Check switch contacts for both power and start,test start solenoid and ensure power down to starter
Check all ground points and clean em at block,frame and batt posts also. Coat all terminals with dielectric grease. Best corrosion protection.

Yamaha... | Answered Yesterday | 18 views


It sounds like the carb jetting is plugged up so that carbs should be removed and cleaned! When you first start the bike keep it idling by having someone hold it on and at the same time light touch the front and rear exhaust pipes. The carb that is working will have a hot pipe and the one not working will be cooler or cold.

Yamaha... | Answered 2 days ago | 39 views


need to replaces your starter coil which seems when it heats up crates short.

Yamaha... | Answered 2 days ago | 53 views


First off, I put a brick under the kickstand to get my bike near level...then i gathered the tools needed. 5mm Alan Head (Hex) Bit, 8mm wrench, phillips head screwdriver, and a vacuum pump (not necessary but very helpful if you're doing it solo.

Attachment 51703

Next step is to remove the left rear cylinder side cover. three 5mm bolts hold this in place.


Unscrew and remove the resevoir cap and diaphram carefully. Cover your paint with a towel (I was probably a little overdue for a fluid bleed...)
Suck out the old fluid from the resevoir using the pump (or a turkey baster) and refill with new DOT 4 brake Fluid (or DOT 3 or DOT 5.1)
Attach a plastic tube to the clutch bleeder valve, set up your vacuum pump, and loosen the valve using an 8mm wrench.
Now, get to pumping...watching the level in the resevoir as to not let it suck any air. When the fluid coming out of the valve is clear, the system is flushed.
(NOTE: if you are doing this by hand, (1) loosen the bleeder valve, (2) squeeze and hold the clutch lever, (3) tighten the valve, (4) release the lever...then repeat 1 through 4 about 50 more times being sure to watch the fluid level in the resevoir)
Once you are done, close the valve to 4.3 ft/lbs and refill the resevoir. Then replace the diaphram and resevoir cap.
Put the rubber cover on the bleeder valve and re-install the left rear cylinder cover. Check the fluid is at the appropriate level...

Yamaha... | Answered on Jun 16, 2019 | 26 views


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+Yamaha+Crypton&tbm=isch&source=univ&sa=X&ved=2ahUKEwi98fOi7uviAhXn1FkKHaQCCzsQsAR6BAgHEAE&biw=1440&bih=757
http://14.avds.instantramen.de/m15/yamaha-crypton-r-wiring-diagram.html
Yamaha Motorcycle Wiring Diagrams
https://www.scribd.com/doc/159403970/Crypton-R-Yamaha
https://www.partsfish.com/page/oem-parts-for-yamaha
YAMAHA CRYPTON T105E SE Owner Manual

Yamaha... | Answered on Jun 15, 2019 | 26 views


In that case something in the cruise control circuitry is shorting to earth. Look for places where wires in the harness my flex or rub against the frame or bolts.

you are not alone and Harleys do it as well.
https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&ei=hZwCXbnMDpHQsAXTponQBg&q=yamaha+royal+star+cruise+blows+fuse+on+cruise+control

Yamaha... | Answered on Jun 13, 2019 | 17 views


yes be sure you mark everything. each gear to chain to engine.

before you remove tensioner wire chain so they stay tight on the sprockets when you remove the tensioner

Mike

Yamaha... | Answered on Jun 13, 2019 | 16 views


Hi, Jerri for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How To Install Motorcycle Backrest Luggage Rack
https://www.youtube.com/watch?v=cI6MrYjyo-g
Honda V65 MAGNA Shop Manual
https://www.partsfish.com/page/oem-parts-for-honda
Road Motorcycles Owning Honda Honda MPE

Yamaha... | Answered on Jun 13, 2019 | 19 views


I would contact a Yamaha Retailer.

Yamaha... | Answered on Jun 12, 2019 | 21 views


Hi, Jerry for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+Yamaha+Riva&tbm=isch&source=univ&sa=X&ved=2ahUKEwjV9OS0udbiAhUsuVkKHcmOAk0QsAR6BAgFEAE&biw=1440&bih=757
Yamaha Motorcycle Wiring Diagrams
http://www.49ccscoot.com/manuals/Yamaha_CV80_Service_Manual.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
http://joezekistan.com/documents/Yamaha_SH50_Razz_Owners_Manual.PDF

Yamaha... | Answered on Jun 07, 2019 | 27 views


Hi, Chris for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+Yamaha+XS750&tbm=isch&source=univ&sa=X&ved=2ahUKEwjl9PrtmtXiAhWRxVkKHU-VD2YQsAR6BAgEEAE&biw=1440&bih=757
Yamaha Motorcycle Wiring Diagrams
http://www.yamahatriples.com/files/5613/2786/4749/Yamaha_XS750_Service_Manual.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha

Yamaha... | Answered on Jun 06, 2019 | 22 views


Its a carb issue but more than likely the internal passages are gummed up. Its probably because you have been using ethanol blended gas. The alcohol wreaks havoc with small engine carbs they were never designed to run this type of fuel. You can try to rebuild it but I have found it only works about 10% of the time. Save yourself a bunch of headaches and purchase a new one. Try to buy non-ethanol fuel or at add a fuel system cleaner everytime to fill up. The cleaner will extend the life but ultimately the new one will plug up.

Yamaha... | Answered on Jun 05, 2019 | 26 views

Not finding what you are looking for?
2008 Yamaha XT125R Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

D. E. Hev

Level 3 Expert

1187 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...