20 Most Recent 2007 Honda CBR 150R Questions & Answers


Hi, Philipp for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 Honda CBR 150R vacuum and fuel line diagram Google Search
Need tank hose routing help CBR Forum Enthusiast forums for Honda CBR...
Honda CBR150R Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR150R Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Honda CBR... | Answered on Dec 07, 2017


Hi, Kulvir66 for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1994 Honda NX 650 Dominator CDI Google Search
Honda NX650 Dominator CDI unit ignition unit NEW MINT0 results You may...
https://www.slideshare.net/cipi505/honda-nx-650-dominator-service-manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda NX500 Owner Manual

Honda... | Answered 10 hours ago


I see no question here?

Honda... | Answered on Sep 13, 2018


You may need to completely clean the carb with a carb cleaner. If bike was setting over winter and not started, the old gas breaks down leaving grime on internal carb parts. I understand the gas now-a-days with 10% ethinol breaks down after about 2 months.
A carb kit can be purchased with new parts that can
also help in most cases.

Honda... | Answered on Sep 13, 2018


probably best done by a mechanic to be honest with you, they will save you time and probably money

Honda... | Answered on Sep 12, 2018


yes
the knowledge will be same and the differences will be the modifications to the later model

Honda... | Answered on Sep 12, 2018


Hi, Mark before diagnosing your blown fuse issue, check the bottom of your seat, if its metal and comes in close proximity to the positive battery post you need to take the necessary steps to ensure there is no contact (electrical tape, thick rubber insulation, hammer a dent in the seat bottom etc.) You are going to need a wiring diagram from your service manual, a test light, an ohmmeter and plenty of extra fuses.
If you turn on your ignition switch and immediately blow a fuse you have a hard/dead short and is usually easy to find. With a test light connected to the hot side of the blown fuse holder start stabbing the wire/s that leads away from the fuse holder and towards the ignition switch, you test light will illuminate validating the short. When the test light fails to illuminate you have passed the short and need to back up until the test light illuminates, then look in the immediate area for the short.
If you driving down the road for 30 minutes or 15 miles and blow a fuse you have soft/flying short and may take some time and patience to find.
If the main fuse/circuit breaker constantly blows/trips while riding you probably have a faulty battery terminal connection. Check battery terminals for damage or corrosion, check battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. Any other fuses that constantly keep blowing while riding are usually caused by a loose or corroded ground wire in the circuit, which means you have to check, inspect, test each and everyone with an ohm meter set on a low ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any reading or infinity indicates a poor ground and needs to be repaired. Poor or weak grounds require excessive additional amperage to complete the circuit which in turn blows the small amperage fuse.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Keep blowing main fuse any ideas
Ignition turned on but no power at all Bike just stop working
Honda NSR150SP service manual pdf
https://www.partsfish.com/page/oem-parts-for-honda
Honda NSR 150 SP Owner Manual

Honda... | Answered on Sep 09, 2018


I would recommend taking it to a gearbox specialist. This could be a problem that a home mechanic can't fix easily without a lot of specialist tools and knowledge.
I'm assuming yours is an Automatic. Hydraulics and mechanical gearing! Serious trouble if you don't have experience working with them!

Honda... | Answered on Sep 06, 2018


Hi, Talbotteddy for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
cr80 kickstart
CRF250X Kickstart Assembly Install
1995 2007 CR80 CR85 2 Stroke Motorcycle Repair Manual Download Download... $15
https://www.partsfish.com/page/oem-parts-for-honda
Honda Owners Manual 1998 CR80 CR80 RB eBay $18

Honda... | Answered on Sep 05, 2018


Maybe the brushes inside the motor are worn too much.

Honda... | Answered on Sep 03, 2018


The best way is to use a set of vacuum gauges. The workshop manual will show you where the connections are, and what the tolerance on vacuum setting is. You can do a poor job by just inserting a small drill into each throttle plate and then adjusting them until they both more off the drill at exactly the same time, but it is very rough. If you don't have the equipment, you are going to have to buy it or take the bike to a Honda dealer to do it, as there is no way to do a good job without the right equipment..

Honda... | Answered on Sep 03, 2018


Hi, Ricky for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
CM400 throttle cable hookup
How to change the Throttle Cables both push and pull in 1980 Honda cm400t
Honda CB400T Shop Manual
https://www.partsfish.com/page/oem-parts-for-honda
cm400t Owners Handbook pdf

Honda... | Answered on Sep 02, 2018


Hi, Mac the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://4-stroke.net/download/service-manual/50-service-manual-for-honda-c110.html
https://www.partsfish.com/page/oem-parts-for-honda
Scooters Owners Manuals Motorcycles Owning Honda Honda MPE
Honda Super Cub Pro 110 2017
Honda Super Cub

Honda... | Answered on Aug 31, 2018


I would start at the switch itself. Pretty common.

Honda... | Answered on Aug 31, 2018


Please ask once and wait.

Honda... | Answered on Aug 30, 2018


Check and replace the flasher relay

Honda... | Answered on Aug 30, 2018


problem--voltage regulator , battery connections , wiring or alternator rectifier
have the system professionally check to determine the fault area

Honda... | Answered on Aug 30, 2018

Not finding what you are looking for?
2007 Honda CBR 150R Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5220 Answers

Marvin
Marvin

Level 3 Expert

82313 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bull 50 Honda

  • Bull 50 Honda

Most Popular Question

honda cbr 150 carburator maintainance

  • Motorcycles
Loading...