11,188 Products for Major Appliances
-
Maytag 5500Bww washer wont drain
A possible cause of this could be the discharge hose is plugged at the pump.
-
What does f05 mean on a hotpoint washing machine
f-05 usually relates to either the pump being blocked or the sump of this particular model being full of coins, color catchers...
-
Simpson Dryer only blows cold air
It's either the fuse, heating element, thermal cut-off or thermostat
-
kenmore 70 series wont stop filling with water to...
Lid off, right side circular pressure switch with black hose attached. Remove end of hose, blow down to make sure not blocked and...
-
Our Maytag stacking washer/dryer, MLE2000AYW, has...
The intake valve may have debris under the plunger allowing the water to bypass the valve. If it fills up when not in use it is a...
-
My Bosch Exxcel 1200 wont drain and wont spin on...
If hoses clear and filter not blocked, can only be pump fault
-
my becko wma150w washing machine fills and but the...
Motor brushes need replacing. check belt tightness too
-
hotpoint mistral plus
Sounds like a faulty thermostat, although fast freeze usually bypasses the stat so should then get to temperature. If the...
-
cl code on the display screen
CL means that your washing machine's CHILD LOCK is ON. You can find two buttons Temp and Options in the panel. Turn ON the...
-
Which is hot and which is cold pipe on Hoover...
With the lid off, the cold one goes to the prewash bit of the powder dispenser and the conditioner syphon. The hot goes to the...