Question about Mitsubishi Pickup

1 Answer

I lost my car keys,to open my door and turn it on..i need the key code

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Take your title or registration to the closest dealer, should be about 20 bucks for a new set.

Posted on Sep 02, 2008

6 Suggested Answers

  • 1 Answer

SOURCE: My electronic key has been lost and my valet key which used to work, won't unlock the door.

I found the automatic key in my wife's car. Thanks

Posted on May 12, 2009

  • 2 Answers

SOURCE: lost car keys, how to replace ignition/door locks

Can u open the doors using the ignigtion key or is it two seperate keys?

Posted on May 21, 2009

  • 18 Answers

SOURCE: lost keyless entry remote

turn door lock left twice to un do alarm ,on old cars it may or may not work due to old age

Posted on Nov 22, 2009

  • 740 Answers

SOURCE: dead battery cannot open car door with key - 2000 mazda mellenia

this is a common problem with only using a key fob to get in.you should use the key once in a while to keep it free and operational.

spray some W-D40 in the key hole let it sit for a little while the try to put the key in the door and turn it back and foward untill it starts to move this may take a few minutes or 15min to unlock it but alittle bit of patience and tired fingers and hands and you'll be in.(after you get the lock free try using the key more often to save your self the head ache down the road)

Posted on Jan 05, 2010

  • 510 Answers

SOURCE: have mercedes E class key fob will not open doors,

If key will not turn
Car battery flat,charge or jump to activate elec ignition

Posted on Feb 06, 2010

jayhawke
  • 335 Answers

SOURCE: car doors wont open with key on a 1997 vw polo

disassemble door and reattach lock rod

Posted on Apr 03, 2010

Testimonial: "thanx very much jay will leave this to a man that knows wat he is doing because i fear i will make it worse.i dont know anything about carsHAPPYEASTER"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition key codes


Key code is on back of passenger door lock to open car

Mar 31, 2014 | 1984 Toyota Corolla

1 Answer

Key Duplicated won't open door works with ignition only


Your duplicate key may be a valet key which would not let a parking lot attendant into the trunk or the doors. If you don't have the original master key, you may have to get a locksmith involved. I doubt the dealer would have key codes for a model that old.

Jul 25, 2013 | 1999 Honda Accord

1 Answer

I lost the keys of my car doors and the key that turns on the car doesnt open doors my batteries is dead and cant open the door


You will either need the dealer to replace the lock set and reprogram the system or a well equipped locksmith.

Sep 06, 2012 | 2000 Ford Focus

1 Answer

I lost the door key to my 1996 Cadillac diville, now every time i open the door the alarm goes off. How do i turn it off.


If you lost the door key and the remote locking fob push unlock on the fob twice. then you need to call a locksmith and have the door key made.

Feb 01, 2011 | Cadillac DeVille Cars & Trucks

2 Answers

Replaced the Battery in the Key. It was not bad just replaced it as a preventative measure. The Ingnition wil not turn now. I can open the doors and hatch. I can place the key in the doorlock and turn...


You need to re-sync the Remote...

The remote handset uses a "rolling code" algorithm, meaning the code is changed every time remote locking or unlocking is performed. If you have removed the battery - then that Rolling code was lost.

If the normal Synchronization does not work, Possibly you will need to use the EKA Proceedure (Emergency Key Access).

Use this link to the appropriate information to aid you in solving your issues.

Oct 25, 2010 | 2005 Land Rover Range Rover

1 Answer

My sparekey will remotely open the doors and light up the dash, but will not start the car. There are no problems starting the car with my main key. We have wittled down the problem to the one key. As it...


the key has a coded magnet inbuilt and it has possibly lost its primary code(long story)so you will need to take all the keys to a dealer and have them all recoded.(change the remote batteries at the same time)droping or leaving keys next to the tv/microwave are the most common causes.

Aug 06, 2010 | 2001 BMW 5 Series

1 Answer

Remote works but doors don't lock/unlock


Check the remote battery or replace. Check all fuses. If you need to reprogram, try this.

key not in ignition.
driver door open-others closed
driver door unlocked

1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice
this is rewrite mode,have all remotes to reprogram
it will clear any lost remotes.

7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possesion,you are done.

to end mode open door or insert key into ig.you can do up to 4 remotes.read this a couple of times to get the sequence down.there are time restraints,but if you go in order it will work.do not wait more than a second b/t each step and you will be ok.i know from experience that you can do this as fast as you can and it will enter mode.if steps out of order or you wait to long it wont.print this and have in lap,read ahead of what you are doing.good luck

Jun 13, 2009 | 2000 Toyota Land Cruiser

1 Answer

Lost car keys, how to replace ignition/door locks


Can u open the doors using the ignigtion key or is it two seperate keys?

May 03, 2009 | 1996 Ford Contour

1 Answer

Recode a key 4 bmw 318i cenral locking


To carry out this procedure you need to have one working key and one key which requires programming. It may help sometimes to hold the key close to the rear view mirror as this is where the sensor is located in most models. 1. With both keys, get in the car and close all windows and doors. 2. Put working key into the ignition and turn to position 1 (the accessories should turn on) (try also position 2) 3. Turn the key back to position 0 and take the key out of the ignition. 4. Using the working key, hold down the unlock button, press the BMW logo (lock button) 3 times, and release the unlock button. Doors should lock and unlock. 5. With the new key, hold down the unlock button and press the BMW logo (lock button) 3 times and let go of the unlock button. Doors should lock and unlock and you're done!! If not working try the following PREPARATION 1. Close all doors, trunk, hood and sunroof. 2. The security system must be in 'disarm' mode. The key must be removed from the ignition key slot. ENTER CODE LEARNING MODE 3. Open trunk and leave it opened. 4. Open the drivers door and sit in the drivers seat. 5. Close the drivers door. 6. Cycle the ignition switch 5 times between the 'OFF' position and position 2,(ignition 'ON', all dash warning lamps will illuminate). The red status LED will illuminate continuously, and the siren will 'chirp' once, to indicate that the code-learning mode has been initiated. ?Do No start the engine.? The Ignition switch cycling in step #6 must be performed within 10 seconds. The sequence in steps #1-#6 must be performed within 45 seconds. REGISTER/DELETE ID CODE(S) 7. Open drivers door, (remain seated in the drivers seat) 8. Close the drivers door. 9. Press and release any button on the remote you wish to register in the system. The status LED will shut off momentarily to indicate that one code has been registered. 10. Repeat steps 7 thru 9 to register the three ID codes. It is possible for the system to memorize a total of 4 different ID codes. As a new code is initialized into the memory, the oldest code is automatically deleted. If you had lost your remotes and wished to delete the lost remote ID codes from the memory, you could initialize the ID codes from a newly purchased replacement transmitter four times thereby deleting the previous ID codes from the system memory. EXITING CODE - LEARNING MODE: 11. Open drivers door, and exit from the vehicle, leaving the door opened. 12. Close trunk. 13. Close drivers door. The LED will turn off and the siren will 'chirp twice. 14. The initialization procedure is now completed; Test all remotes to confirm operation. If this doent work your alarm/central lock needs to be reset

Mar 28, 2009 | 1996 BMW 318

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...