Question about 2002 Jaguar X-Type

1 Answer

Removal of 57 plate x type jaguar car stereo

I have to fit a handsfree car kit to a 57 plate x type jaguar how do you remove car stereo

Posted by on

  • louise7926 Sep 26, 2008

    I am also wanting to know this as i have an 03 X type jag and want to replace cassette player with a CD player. Any help? Please.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Unclip plastic surround from gear stick, then remove ash tray - i know i didnt think it sounded right either...carry on...remove plastic cover now thats hiding 2 torx screws, remove them.
at the top of the unit near the hazards, that little section pops off to reveal 2 more torx 60? screws, remove them, and it will just pop out.  the unit looks like it could just slot the stereo part out but you cant.

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mki 9100 parrot to fit in my 03 plate merc clk. do i need an extra cable?


They advise using a professional installer. And I found this

http://dbinstall.parrot.com/compatibility_pdf.php?model=1031&ck=12

For the CLK there is a special kit

http://www.ebay.com/itm/MKI9100-CT10MC02-Mercedes-CLK-Class-Parrot-Bluetooth-Handsfree-Car-Kit-/141233049285

and mentions a lead

Kit Consists of the following:
  • MKI9100 Parrot Bluetooth Handsfree
  • CT10MC02 Parrot Wiring Harness Adaptor Lead
Parrot MKi9100 https://parrotcontact.parrot.com/.../MKi9100_User-guide_UK.pdf · PDF file Parrot MKi9100 - 4User guide Installation WARNING: We advise our customers to have the Parrot MKi9100 fitted by a professional. Before you begin

Dec 30, 2015 | Cars & Trucks

1 Answer

How do i fix jaguar fx am radio


Thread: Radio AM in 2008 XF - JaguarForum.com

www.jaguarforum.com/showthread.php?t=47464
Jul 14, 2012 - Apparently owner from new says AM never worked. ... Did have X TypeManual 2.2D 2006 and X Type Manual 2.5 AWD Petrol 2002. ... from new and apparently didn't get it fixed at the time, I would say Jaguar would be within ... X-Type radio wiring diagram?
Jan 12, 2014
Replacing the stereo in my X-Type - a guide?
Apr 13, 2013
Anti Popup Policy
Oct 31, 2004
More results from www.jaguarforum.com

Jaguar Car Stereo Removal X-type 2002-2008 - YouTube

? 4:55
www.youtube.com/watch?v=G-7DhH2xQQE

Apr 17, 2012 - Uploaded by Factory Car Stereo Repair
2004 jaguar x type.... can i plug in a aux wier in to factory radio ?... I cannot install a aftermarket head unit in my x type due to the fiber optic data ...

Oct 21, 2015 | 2002 Jaguar X-Type

1 Answer

Hi i have look over the net to get my iphone 5 to work in my x type jag 53 plate with no touch screen in the car help please chris


you need a aftermarket jaguar bluetooth kit fitted, to interface with the audio head unit, have fitted several. in the past, hope this helps

Mar 16, 2015 | 2003 Jaguar X-Type

1 Answer

Can you help with instructions on how to install a mesh grill and spoiler on a 2003 X Type Jaguar..... Thank You


i have fitted an "admesh" brand mesh grille and spoiler on my fathers 2004 X type.

the mesh in the spoiler would have just fitted over the existing plastic grille using the supplied clips, if the original grille had not been damaged. i just removed unscrewed the original grille and fitted the mesh one using the same fittings.

for the main grille, i removed the grill from the car (4 screws) and cut out the centre plastic vanes before fitting the new mesh one to it using the supplied clips. i then screwed the whole unit back in place. it took about 1 1/2 hours from start to finish for both mesh grills.
the instructions were quite clear and most helpful.

i do not know which kit you have so do not know specific fitting instructions, but as far as i am aware, most kits would fit in a simillar way and should not be to difficult to fit with a little care.

Feb 25, 2011 | 2003 Jaguar X-Type

1 Answer

To remove 1993 mustang conv. top cylinders should top be up or down? thanks, bill


don't have 93. here's 94

Motor Assembly, Convertible Top Removal and Installation
NOTE: The folding top hydraulic cylinder rods should be in the fully retracted position.
Use absorbent rags or a container to catch any hydraulic fluid that leaks out when removing the fittings.
  1. Remove motor and pump assembly as outlined.
  1. Loosen each folding top motor upper and lower hose fitting on the sides of the folding top hydraulic lift motor and plate kit (533A00) .
  1. Remove the folding top hydraulic lift motor and plate kit .
  1. Remove each of the service folding top hydraulic lift motor and plate kit plugs one at a time and attach the tee fitting to the replacement folding top hydraulic lift motor and plate kit . NOTE: Make sure that the o-ring is installed in the bottom of each folding top hydraulic lift motor and plate kit port before attaching the hose tee fitting.
  1. Connect the folding top hydraulic lift motor and plate kit unit to a 12-volt power source and cycle the folding top hydraulic lift motor and plate kit in and out several times to purge the air from the folding top motor upper and lower hoses (53390) . Some noise squeal may be noticed due to the air. srb~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not overfill or the reservoir seal could be blown out.
  1. Carefully remove the rubber fill plug from the back and the reservoir and check the fluid level. The level should be at the bottom of the filler hole. If necessary, add Synthetic Mercon® Multi-Purpose Automatic transmission fluid E6AZ-19582-B (ESR-M2C163-A2) or equivalent.
  1. Replace the fill plug with a new fill plug.
  1. To install, reverse Removal procedure.
-------------------------------------------------------------------------------------------------------------------------------
Section 01-17: Convertible 1994 Mustang. Workshop Manual
REMOVAL AND INSTALLATION Lift Cylinder, Power Top Removal and Installation
NOTE: The cylinder rods should be in the fully-retracted position.
  1. Remove pump and motor as outlined.
  1. Remove the upper and lower hose fitting from the folding top hydraulic cylinder (50600) . Use absorbent rags or a container to catch any hydraulic fluid that leaks out when removing the fittings.
  1. Remove each of the service cylinder plugs one at a time and attach the hose fittings. NOTE: Be sure each fitting is installed in the correct position on the folding top hydraulic cylinder .
    NOTE: Make sure that the tetra seal is installed in the bottom of each of the folding top hydraulic cylinder ports before attaching the upper and lower hose fittings.
  1. Connect the folding top hydraulic lift motor and plate kit (533A00) to a 12-volt power source and cycle the folding top hydraulic lift motor and plate kit in and out several times to purge the air from the hoses. Some noise squeal may be noticed due to the air.
  1. Carefully remove the rubber fill plug from the back and the reservoir and check the fluid level. The level should be at the bottom of the filler hole. If necessary, add Synthetic Mercon® Multi-Purpose Automatic transmission fluid E6AZ-19582-B (ESR-M2C163-A2) or equivalent.
  1. Replace the fill plug with a new fill plug.
  1. To install, reverse Removal procedure.

Jan 21, 2011 | Ford Mustang Cars & Trucks

3 Answers

"No Phone" in 2003 Jaguar X-Type


I do not have my manual in front of me, but certain VIN numbers do not have the bluetooth installed in the car. I have a 2003 Jaguar X-Type and I have a phone button, but my VIN number was not in the range of jaguars that came equipped with the bluetooth. You can get a phone that has bluetooth and test to see if it finds a bluetooth device (your Car Phone Device).

Apr 05, 2010 | 2003 Jaguar X-Type

1 Answer

Clutch started to slip on steep hill any way to adjust ?


I guess its time for a new clutch plate, best would be to fit in the pro-kit (clutch pressure plate, clutch plate and release bearing).

Nov 14, 2009 | 2002 Jaguar X-Type

1 Answer

HOW TO REPLACE REAR HAND BRAKE PADS ON A JAGUAR XJS(INBOARD TYPE) OR WOULD YOU KNOW WHERE I COULD LOOK UP A HOW TO GUIDE. I HAVE THE MANUAL BUT IT IS DOESENT REALLY HELP A LOT. MANY THANKS JIM


awkward with diff carrier in place but possible need car jacked up high as you can remove lower plate on carrier for better acces remove hand brake cable from callipers release lock tab remove the mounting bolts and the fork feed calliper round brake disc towards rear of carrier on bench note correct fitted position of pads remove nuts holding each pad clean mounting faces well if this not done new pd can be damaged fit and secure new pads unwind adjuster bolt operate calliper lever to check adjuster working should hear it click if ok refit io car guide in poition locate in position a taper gound on to bolt helps as easy to miss hole in calliper when happy it correct gently remove bolts fit fork and tab secure bolts engage fork lugs in calliper arms operate calliper lever by hand till freeplay is taken up pads now in correct position do other side refit cable and lower plate good luck

Oct 13, 2009 | 1986 Jaguar XJ6

1 Answer

1999 xj8 phone kit


You need a Motorolla Star Tac mobile phone out of the ark (eBay used to have them at £146!) and a Jaguar celluar phone installation kit. Not worth it at all ....

Jan 19, 2009 | 2001 Jaguar XJ8

Not finding what you are looking for?
2002 Jaguar X-Type Logo

Related Topics:

588 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Raygin
Raygin

Level 2 Expert

322 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...