Question about 1994 Dodge Intrepid

2 Answers

I have 97 dodge intrepid signal lights and flashers don't work adn theres a frying sound when I turn on flashers.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 60,792 Answers

Sound like a burnt contact in the turn signal switch.

Posted on Sep 02, 2008

Check your relay for signals or the clicker device for the flashers the thing that makes a continuos click when you turn on your flashers.

Posted on Sep 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Dodge Intrepid "ES" model...turn signal/flasher doesn't work.


the flasher is under the dash on the drivers side. if you turn on the hazard lights and look under the dash you will see what turn signal flasher looks like and know which flasher not to change thinking its the right one. look for the signal flasher and change it.

Aug 24, 2014 | Cars & Trucks

1 Answer

The rear turn signal lights are not working in my 1999 Dodge Intrepid. The front ones work but blink fast. We changed the bulbs with new bulbs and that didn't fix the problem.


You need to change the flasher unit. Usually a silver squat cylinder with a 3 prong connection.
Consult your owners manual for the location of the flasher module. It is likely under the dash maybe clipped the the body / frame work there. Note that here are usually 2 of these. one for the signals and one for the hazard flashers.They are interchangable. These are only a few dollars at any auto parts store.

Jun 21, 2011 | 1999 Dodge Intrepid

2 Answers

Signal lights are not working,can you show me in a diagram where the flasher is located on a 1996 intrepid?


The turn signal/hazzard flasher is a small unit ( little black box, 5 prongs ) Located between the fuse box and brake peddle on a braket under the drivers side air conditioning duct. At some point and time in 1995 dodge swiched over in the middle of production so some 95 intrepid and 96 and 97 should all be the same.
ep27

Feb 14, 2011 | 1996 Dodge Intrepid

1 Answer

Hello! where are the relays for the turn signals on a 2002 dodge intrepid?


turn and hazard lights flasher is under dash on driver side. the best way to identify the component is go to the part store and ask to see a turn signal flasher. then you will know what your looking for. easy to replace, just unplugs

Jan 09, 2010 | 2002 Dodge Intrepid

1 Answer

Where is the Hazard/Turn Signal switch located in a 2000 Dodge Intrepid? My Turn Signals & Hazards stopped working without any warning and all light bulbs and fuses appear to be good. I have ordered a...


2000 Dodge Intrepid 2.7L SFI DOHC 6cyl

The Flasher is located front seating area, driver side, under left hand side of instrument panel between junction block and brake pedal.

Oct 30, 2009 | 2000 Dodge Intrepid

1 Answer

Turn signals and hazards dont work 2004 intrepid


sounds light a bad flasher module(relay), or it's circuit wire

Jul 27, 2009 | 1999 Dodge Intrepid

1 Answer

2000 Intrepid turn signals stopped working, I replace the flasher relay, still turn signals not working?


did you replace the turn signal flasher or the emergency flasher? turn on the emergency flasher lights and pull that flasher if they quit working you changed the wrong one.

Jun 25, 2009 | 2000 Dodge Intrepid

1 Answer

Need to locate signal light flasher 2001 dodge intrepid


If you mean the flasher, which makes the turn signals and hazards to blink, then...

It's a combo flasher which operates both the turn signals and the hazard lights. To access the combo flasher with ease remove the drivers knee bolster and then remove the brake release cable end from the handles notch, then disconnect the harness from the trunk release switch. Next there will be a reinforcement panel, remove that as well. Finally locate and replace the combo flasher from behind this panel. It is a black box that has a harness connected to it with a pink wire, a black and yellow wire, a red wire, a dark blue and pink wire, and finally a black wire. To help locate the flasher either turn the turn signal on or apply the hazards and listen for its location.

Apr 17, 2009 | 2003 Dodge Intrepid

2 Answers

Turn signal flasher cant find it in car


I found it today.
It's way up under the dash to the right (looking from below) of the steering column. Mine was hidden by a bundle of wires. It is attached to the bottom a white part. (Maybe the fusebox.} You have to push hard towards the rear of the car and it will slide off.. I disconnected it from the socket first, it is held on by a clip.

'94 Concorde, same thing only different.

Jan 14, 2009 | 1997 Dodge Intrepid

2 Answers

Turn signal won't work


It might be the flasher but the problem might also be the positive battery terminal. pull apart the positive terminal and clean all the connections including the small wire that make connection to it. Use dyomite electrical grease on the connections
Re assemble and then your turn indicators should work.


let me know if this helps

Jan 13, 2009 | 1997 Dodge Intrepid

Not finding what you are looking for?
1994 Dodge Intrepid Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...