- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pull up on the emergency brake pedal with your hand to see if the light will go off. If it will. there is a slack adjustment for the cable going back to the rear brakes. If it won't then the switch is bad or out of adjustment. It's located on the emergency brake pedal
the traction control system works off of the abs system so there is a code in the abs module that needs to be pulled so you know were to start to check the system out.the service engine light is a different system all together and there is a code in the ecm that must be pulled so you know were to start to check to repair that system.you don`t say why you jumped to the conclusion that the gas cap set a code.the emergency brake light will come on if the e-brake is not all the way in the off position(something may be holding the lever up just enough to put the light on.the switch could be misadjusted and needs to e readjusted.
Hello: Look under the dash on the driver side, above the foot pedal for the park brake you will see the park brake assembly there will be a small lever possibly with a yellow tip. pull back on the lever and it should release the park brake.
2 issue may cause the light to stay on. 1st, the brake resevior switch in faulty, the cap with two wires attached to it. Secondly, the emergency brake switch is faulty causing the light to stay on. to replace the switch. Both are cheap and very easy to replace and fix.