YOU NEED TO RAISE THE HOOD,YOU HAVE TO REMOVE HEADLIGHT HOUSING BY TWISTING THE HEADLIGHT HOUSING MOUNTING RODS OUT OF THEIR CLIPS AND PULL UP THEM STRAIGHT UP TO DISENGAGE THE HOUSING FROM VECHICLE. WITH HEADLIGHT HOUSING OUT VECHICLE REMOVE LIGHT BULBS, YOU NEED TO WEAR CLEAR PAIR OF LATEX GLOVES WHEN HANDLING NEW HEADLIGHT BULBS BECAUSE HEADLIGHT BULBS ARE HALOGEN BULBS OILS FROM FINGERS OR HANDS CAN CAUSE HALOGEN BULBS OVERHEAT AND BLOW OUT.HALOGEN BULBS VERY EXPENSIVE THEY COST FROM $10.00 UP TO $20.00 OR MORE SO WHERE CLEAN GLOVES WHEN HANDLING BULBS.
HEADLIGHT HOUSING IN NEW CHEVY MODELS HAS A SCREW ON TOP OF HEADLIGHT HOUSING ON ONE SIDE YOU FIRST REMOVE THEN THERE IS A LONG PLASTIC RETAINER ON THE OTHER SIDE OF HOUSING YOU PULL UP AND REMOVE THEN HEADLIGHT BULB HOUSING CAN BE REMOVED.IF THIS DONT HELP LOOK IN OWNERS MANUAL IN GLOVE COMPARTMENT LOOK IN BACK INDEX OF MANUAL.LOOK UP BULB REPLACEMENT IT WILL SHOW AND TELL YOU HOW TO REMOVE AND REPLACE HEADLIGHT BULB.
×
538 views
Usually answered in minutes!
This would work if the vehicle was a 2006 or earlier. As well our vehicle is a Suburban 2007 Half-Ton - 1500 LS. Do you have any other suggestions for this type of vehicle?
×