Question about Hyundai Motor 1995 Accent

1 Answer

Question Ive looked at some of your posts and was wondering by the way as ive been having a problem with a 6 wheeler truck. Ive kept changing the clutch kit every month for 3 months and was wondering why such fast wear and tear on it. I just selected Accent as I could not find the model. Its a 1994 closed type body

Posted by on

  • 3 more comments 
  • Thomas Lim
    Thomas Lim Sep 02, 2008

    Its a Hyundai 6 wheeler truck. Im not really sure its a Hyundai anymore since the body is just a remanufactured body but the engine is Hyundai 1994 or 93. Im wondering because i keep having to change the clutch kit as lubricant leaks and i loose any use of the clutch around every 3 months but the shortest was a month. i know your not supposed to have to do that even with heavy use.

  • Thomas Lim
    Thomas Lim Sep 02, 2008

    im not trying to prove a point or anything what im asking is that ive had to change the kit every 3 months and was wondering why i needed to do so that often. If you want to see it fine i can send you a picture but not right now as it is on its way to the south of the philippines on its regular route. Do you really think id kid around about something like that. Im not patronizing you by the way and dont think i am . im not baiting you and dont think i am. i am not that type of person. I asked you because atleast i thought id get an honest answer and not some BS. I just asked you a question you were the one who decided to add color to it, If you dont want to help tell me so i will ask someone else thank you very much

  • Thomas Lim
    Thomas Lim Sep 02, 2008

    Appreciate that! Ill let you know how it goes.

  • Anonymous Jan 09, 2009

    there is no power when i change gears

  • Wes Bingham May 11, 2010

    What kind of truck do you have?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 46 Answers

I don't know if you are trying to prove a point here or not?

If you are losing hydraulic fluid out of your clutch you need to fix the leak.

If you have a Hyandai 6 wheeler truck I would like to see it.

Posted on Sep 02, 2008

  • Wes Bingham Sep 02, 2008

    Here is the honest answer on clutch wear



    If you have an oil leak, either transmission or engine, it will cause premature clutch wear.



    You need to fix the oil leak before any further clutch diagnosis can be performed!!!!



    If you have a clutch hydrualic leak. You need to pinpoint the leak and repair it. When you get air being pumped into the clutch hydryalic system you will loose all clucth performance as you indicated in your question. Hydrualic systems cannot operate on air.



    If all fluids leaks are fixed. Both the leaks from your engine and transmission that could be leaking onto your clutch, and contaminating the friction disc. Or the hydrualic leak from your clutch that can introduce air into your clutch, and you still have a clutch wear problem you need to check your clutch pilot bearing.

    Then check for proper alignment and egagment of your clutch release bearing.



    If all of this checks out you should no longer have any clutch wear issues.



    Thank you for using fixya.com

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What year and model suzuki 4 wheeler has serial number j412-112355. jug stamp 229cm3


have no idea at all what that is.
and ATV, if yes post to ATV section and not Cars.
and no question asked.
is it a year question?
is this a road car.
if yes, and in USA is it>
then the engine serial number has the year code
as does body VIN.
so. next time stated what the heck is a 4 wheeler.
suzuki makes many, that have 4 wheels.

the only thing with "JUG stamps" ive ever seen are
motorcycle engineS. (or ATV that many use same air cooled engine)

NO IDEA WHAT CAR, OR TRUCK
NO IDEA WHAT ENGINE,
NO IDEA WHAT YOU ARE ATTEMPTING TO DO.


229 CUBIC CENTI-METERS. CC'S
NO car has this, here.

Dec 28, 2015 | ATVs

1 Answer

I have a draw on the battery on my 85 Toyota pickup it kills a fully charged battery in about 2 hours... Ive put a volt tester between the disconnected positive battery cable and the positive battery post...


Go to You Tube Video & see how to do a parasitic CURRENT
drain test

What you have done so far with a test light & volt meter is basically
doing nothing

You need an amp meter & a wiring diagram,then pull fuses one
at a time, to get to the circuit that causes the drain,then use the
prints to test that circuit for voltage drops

Mar 15, 2014 | 1985 Toyota Pickup

1 Answer

Ive got a 93 mazda mx-6. the motor came out of a 97 ford probe 2.0. with that being said.. 2 days ago, i drove it down a bumpy road (slow) at a coast. it dies and won't start. ive looked everywher


According to the wiring diagram, there is no inertia switch on a Mazda MX-6. The fuel pump circuit only has a pump relay which is powered by a fuse and grounded by the computer.
And if the car did have an inertia switch it would not affect the ignition system.
If you have no spark and no fuel pressure I would check the circuits for the pump, coil, and computer at those fuse locations and beyond. Could have shaken something loose at the key switch or in the wiring.

Sep 16, 2012 | 1993 Mazda MX-6

1 Answer

I have a 1988 mitsubishi mighty max that Ive replaced the alternator on 4 times, Ive went through every wire on the truck looking for a short and found nothing, I was wondering if there was an external...


Get the battery checked out, even if it is new. I found out this on mine after I replaced the alternator and the battery was fully charged. After it had run a while it would not start back up, Got it tested at an interstate battery shop and they said it was borderline on the load machine, but the digital $$$ machine said replace battery. Good thing it was still under warranty , free replacement. Been driving ever since then no problems.

Jan 15, 2011 | 1988 Mitsubishi Mighty Max

2 Answers

Engine will not go more than 3000 rpm have changed air mas meter and turbo pressure swicth no change vw passat 20tdi 06 plate


pull the intake tube off of the throttle body and look inside if there is a build up of black carbon than you will need to remove and clean MAKE SURE you dont drop any of that **** in to the intake it will mess up your engine.

Sep 10, 2009 | 2001 Volkswagen new Passat

2 Answers

Need to fix transmission


that would depend on you only you have the answer for that depending if you want to put the money into it or not as far as how long they go< depends on the maintenance done to it if its been kept up ive seen them go as far as 500,000

Mar 10, 2009 | 1996 Nissan Maxima

1 Answer

1998 Dodge Intrepid Stalling while driving ,running rough at 45mp


have you check your battery cables, the condition, if there tight? these cars have a tendancy to have the cables rot out and that will cause your troubles.

Feb 12, 2009 | 1998 Dodge Intrepid

1 Answer

Subaru wrx giving trouble


Did you happen to change the idler bearings and pulley when you changed the belts?

Oct 12, 2008 | 2002 Subaru Impreza

1 Answer

2003 ford escape, change battery


you may have to have the computer reflashed. Only the dealer can do that also. that is very bad for all electrical components in the car.

Aug 10, 2008 | 2003 Ford Escape

Not finding what you are looking for?
Hyundai Motor 1995 Accent Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...