Question about 2007 Chevrolet HHR Special Edition

1 Answer

2007 HHR Wiring diagram

I bought a wrecked 2007 HHR. I need a wiring diagram for the electrical system. Replaced the wiring harness to the engine and now it won't start. Any suggestions!

Posted by on

  • Anonymous Mar 15, 2014

    Lens is cracked and needs to be replaced

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

Is there spark? is their fuel? also if it was wrecked chances are that the fuel cut-off switch was triggered. i have not ever worked on one so i don't exactly know where it is but i would check behind the fabric/hard plastic right rear/left rear wheel hosing and see if you can hit the reset switch. another suggestion is go to napa or oreillys and get a repair manual for it it has diagrams and schematics in it and it cost about 20 bucks.....good luck please rate this.....thanks

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. I have a 2002 Mercury Mountaineer. Both brake lights and flashers on rear do not work.Third brake light does as well as front turn signals/lights. I've checked fuses and bulbs. Thank you.


Do you know how to do electrical testing with a DVOM - digital volt ohm meter ? How to read a wiring diagram ? How to use a wiring diagram to pin point testing areas in a wiring harness . How to locate splice points in a wiring harness ? What a body ground is an how to locate them with service information ? Here is a web site for free wiring diagrams
http://www.bbbind.com/free_tsb.html Enter your vehicle info. Year , make , model , engine size . Under system click on lighting , then under sub system click on turn signal lamps .

Testing the circuit's is the only way to find out why these light's are not working. Here are training videos on you tube . Check them out .
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
The Trainer 29 Understanding How Electrical CIrcuits Work and How to Test...
Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia

Electric Testing Techniques You Need to Know

As a professional automotive technician , this is how I find electrical faults ! Plus having factory service info is a must , to locate grounds , splices , how the wiring harness is run through the vehicle etc...



Apr 15, 2017 | Mercury Cars & Trucks

1 Answer

2007 chevy aveo 5 hatchback. Bought the harnes for a new sterio and wired both new harnesses together. no dash lights or tailights work. Now the security system won't turn off.


YIKES!....It's time to reverse engineer your work. Disconnect the work you did and reconnect the wires as they were before you started the project; make sure you take your time.
Once that's done, check to make sure everything is in proper working order- to original design.
Get yourself a wiring diagram specific to your vesicle year, make, and model. Identify an mark the wires accordingly.
Identify and match up the wiring harness of your stereo to those of your car's wiring...if you still have a problem, you may have incompatible stereo wiring to that of your car's or you'll need to bring it to an after market car sound system installer who knows the work-around, to get it installed properly. Time to shell out the $$$

Feb 13, 2017 | 2007 Chevrolet Aveo Sedan

2 Answers

Where can I find an engine compartment diagram


is the vehicle able to move ? if so i'd take to a dealer who has the same model and have a look too see the undamaged wires etc as you would be better off with a new loom than trying to repair the wires if it is only at the peripheral end of the electrical system

Apr 26, 2014 | 2005 Dodge Caravan

1 Answer

Dtc codes


Anti-Lock ControlPinpoint TestsPinpoint Test F: DTC C1266Refer to Wiring Diagram Set 42, Vehicle Dynamic Systems for schematic and connector information. See: Electronic Brake Control Module > Removal and Replacement > Anti-Lock Brake System (ABS) Module. TEST the system for normal operation.NoVERIFY BJB fuse 109 (20A) is OK. If OK, REPAIR circuit 483 (RD). If the fuse is not OK, REFER to the Wiring Diagrams to identify the possible causes of the circuit short. CLEAR the DTCs. TEST the system for normal operation. See: Vehicle > Electrical > Diagrams By Number------------------------------------------------- 7e31ae16-fdd7-4a46-aeb5-da4950e51178.jpg - - Disconnect: ABS Module C135. Measure the voltage between ABS module C135-25, circuit 483 (RD), harness side and ground.
if voltage is greater than 10 volts replace abs module if not
check fuse described in upper section if fuse is bad replace if it blows again you need to check wiring

Apr 21, 2014 | 2010 Ford Crown Victoria

1 Answer

I have a 1997 Chevy Venture. I replaced the fuel pump, and relay. Checked all the fuses, and they were good. We then proceeded to tear the interior apart and check all the wring by tracing from pump to...


Learning how to do automotive electrical trouble shooting . Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
Reading wiring diagrams !
The Trainer 32 How To Read An Automotive Block Wiring Diagram
.Finding wiring diagrams
http://www.bbbind.com/free_tsb.html enter vehicle info year , make , model an engine size . Under system click engine , under sub system click fuel controls . Click the search button one link pops up , click on that .Third diagram down is fuel pump electric diagram . See there are two connectors in that wiring harness , C - 200 & C - 305 . Plus you will see the power wire is gray . Find the connectos check for B+ voltage along the harness

The Trainer 29 Understanding How Electrical CIrcuits Work and How to Test...
The Trainer 23 How To Repair Wiring and Wiring Connectors



Mar 27, 2017 | 1997 Chevrolet Venture

2 Answers

2002 jetta tdi died while shifting into 4th gear


Sorry, not a solution to this car but your other vw 1989 jetta...only way I could get hold of you.

here is your diagram

The following information covers electrical connections and plugs to the rear of the fuse/relay panel. It completes and supplements the information in the appropriate Service or Repair Manual for the fuse/relay panel section and should be used in conjunction with the wiring diagram for the vehicle or system in question. Volkswagen part numbers shown here may or may not match those on your panel, however, if you panel visually matches the diagram, it is correct for your application.
Fuse/Relay Panel - Rear Connections (Volkswagen Part Number 171 941 821 D) clear.gif
97-3228.gif
Connections and plugs on rear of fuse/relay panel:
A Blue 28 pin Instrument cluster wiring harness B Red 28 pin Instrument cluster wiring harness (position 5 open) C Yellow 22 pin Engine compartment/engine management, left side (position 10 open) D White 29 pin Engine compartment/wiper motor wiring harness, right side (position 6. 10, 14, 18, 27, 28 open) E Black 18 pin Rear wiring harness (position 17 open) G n/a 1 pin 10 individual circuits H Brown 6 pin Air conditioning/coolant fan relay wiring harness K Neutral 5 pin Seat belt warning system/coolant level wiring harness L Grey 4 pin Horn wiring harness L Black 4 pin Headlight/dimmer switch wiring harness M Black 2 pin Steering column switch wiring harness M Black 2 pin Headlight/dimmer switch wiring harness N Red 1 pin Separately fused circuits (glow plug wiring harness) P Red 7 pin 7 single point connectors for terminal 30 circuit R Green 2 pin Open/ECM power supply relay
Note: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market. Always consult appropriate wiring diagram for specific terminal assignments.

hope this has resolved your problem

Thankyou

Aug 15, 2009 | 2003 Volkswagen Jetta TDI

1 Answer

09' hhr fog light wiring


You will need to completely wire your own setup. The "stock" fog lights on the HHRs are wired through the Body Control Module computer which can not be reprogrammed without being replaced. Cost of the computer is over $300 and certainly NOT worth it for a set of fog lights. Put in your own switch, wiring, etc. I would highly recommend that you use a relay to power them since the electrical system for the HHR is very sensitive to external additions.

Mar 09, 2009 | 2008 Chevrolet Hhr

1 Answer

1994 BMW 740iA electrical fire under hood. Cannot find proper electrical wiring diagram. Wiring is burned from 8 wire 12 pin connector and is melted into the main wire trunk that travels along the left...


Check out this link. It is to RealOEM and will provide you the BMW product codes and descriptions you need to find the replacement harness, http://www.realoem.com/bmw/showparts.do?model=GF63&mospid=47526&btnr=12_0585&hg=12&fg=28

Also, the link below is to provide you schematics for your engine wiring harnesses. You did not indicate which engine you had (diesel or gas). The link provides access to schematics for both engines. http://www.bmw-planet.com/diagrams/release/en/e38old/index.htm From the main menu, select: Drive, then your engine and then select engine electrical system. As far as the cause, you didn't mention what the source of the fire was. Check online for recall notices for your specific model. A google search will yield several links to sites that list recalls for yyour vehicle. It will let you know if there are any known issues regarding engine compartment fires for your model....

Mar 06, 2009 | 1994 BMW 7 Series

2 Answers

Hhr fog lights


yes it is you will probably have to have the bcm programmed for the foglight option if your gonna install like factory is

Sep 22, 2008 | 2007 Chevrolet HHR Special Edition

1 Answer

I am repairing a wrecked 2007 mazda 3 hatch back. I have bought a used power steering pump but the wires were pulled out of the plugs. Where can I find the color code wiring diagram for the power steering...


I have the wiring from two front ends of a Mazda 3 that are different. I'm looking for the diagram to match the good car. There are 3 connections. What info do you need?

Aug 11, 2008 | 2005 Mazda 3

Not finding what you are looking for?
2007 Chevrolet HHR Special Edition Logo

1,704 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...