How to change a starter 1995 3.4 v6 eng: Chevy camero automatic

https://www.justanswer.com/chevy/3pa5y-change-starter-1997-chevy-blazer-4wd-4door.html

When you say after first gear do you mean it shifts
from first to second and then does not shift after that. If that is what you are saying the problem is most likly the 3/4 clutch. The transmission is a 4L60E 4 speed automatic.
The 3/4 clutch is a week point in this transmission.

22m

I would say that the choke sensor (or whatever it is called) went bad & isn't telling the computer that it's cold & requires more fuel. Instead of starter fluid, did you try to push the foot feed 1 or 2 times?

Definitely sounds like an electrical problem. I would check your fuses and relays. I'm no car expert but I know there are fuses/relays for the starter and ignition. If those are all good, follow/check the wiring from the starter back to the battery. There's probably some kind of ignition control module (icm) also. When mine went out in my Chevy truck it did the same as what you've explained yours is doing or not doing I should say. Good luck!

Heres a diagram for you.






http://autorepair.about.com/library/firing_orders/bl-fo-6417.htm

No it will not fit or work properly.

my 95 camero 3.4, won't start it has spark and fuel but i think the fuel injectors are't working. i have no check engine lite on.

The injectors should be connected to the fuel rail, which looks like a long shiny tube, about the size of a sharpie marker. remove any bolts securing it to the in-take manifold. Then carefully lift the fuel rail off the top of the engine and u should be able to see all of the injectors.

The guys that know this are the wrecking yard guys, the rest of us repair to original...