Question about 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Turn signals on 05 Expedition willnot work. Checked all the bulbs and still don't work Also checked fuses. Hazards do work. What else sould I check? Ronnie Byrd

Posted by on

  • 1 more comment 
  • john Gaffney Sep 17, 2008

    I have the same proplem on my 2000 exepdition, and have done the same trouble shooting as to checking the fuses and bulbs, all are ok,, where is this electronic flasher module located at??Under the hood???

    Thank you

  • Anonymous Mar 25, 2014

    no signal,, annoying whirring sound (hazards)all lights blink just fine

  • Anonymous Mar 25, 2014

    turn signal not working, makes a whirring sound but (hazards) works just fine with all lights

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Where is the electronic flasher located ?

Posted on Dec 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 60,667 Answers

The turn signals have a electronic flasher module, replace it.

Posted on Sep 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Signal lights not working


Are you getting power in and out of the turn signal switch ?

May 16, 2013 | 2004 Ford Expedition

2 Answers

!997 Ford Thuderbird brake lights and hazards do not work


Lets start at the beginning.
The turn signals and brake lights use different fuses but both go thru the turn signal switch and use the same bulbs.
Have you checked the fuses for each circuit and does each switch have power in and out ?

Feb 03, 2013 | 1997 Ford Thunderbird LX

1 Answer

2005 monte carlo drl won't tun on and i have no Low beams too. High beams, turning signals and hazards works. I replaced the bulbs, still drl and low bemas don't work. Checked all fuses and th


CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

Jul 30, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

How do i fix my blinkers on my 1971 f100 ford ?


There is a flasher unit for the turn signals, separate from the hazard flasher, that is under the dash. If the fuse for the turns is good, and you already know the bulbs are good since the hazards work, then you may have a bad turn signal switch.
When you use the turn switch, do the bulbs come on and stay on, or nothing? If they come on and don't blink, then it's probably a bad turn flasher unit. If they don't come on at all, suspect a bad turn signal switch. But first check the fuses, then pull off the connector to the turn switch and see if you have one hot wire there, with key on. That one hot wire will be from the fuse.

Mar 01, 2012 | Cars & Trucks

1 Answer

Turn signal dosent work


you need to check to see which bulbs don`t work both front and back lights for the signal on the side it`s not working,you don`t say if any signals work or not if no signals work then you need to check the fuses under the dash on the driver`s side.now if it`s just one side then check the lights as mentioned above.if one isn`t then replace the bulb.if neither bulb is working then it sounds like the signal flasher is not working.turn on the hazard flashers and check the lights front and back.if all bulbs work then leave the hazards on and look under the dash for the flasher that is making the noise,this will show what the signal flasher will look like,then find the signal flasher on the fuse panel under the dash it should be located on the fuse panel.and replace

Mar 15, 2011 | 1997 Dodge Ram 1500 Club Cab

2 Answers

No brake lights, turn signals, or 4-ways.


Did you actually check the bulbs? I believe your brake lights, signal lights, hazards all use the same bulb for each side.

Your brake lights may be your brake switch just above your brake pedal.
The signals could be your electronic flasher module (EFM) located under the dash near the steering column.
Your hazards may be affected by the EFM, but not likely and the switch for your hazards may be faulty

Sep 10, 2009 | 1998 Chevrolet Blazer

2 Answers

Turn signal and hazards wont work checked the fuses and the flasher already


Do you have a trailer wiring harness? If you do, recheck the wiring there. If that doesn't help and you have properly checked the flashers then you need to check each bulb

Jul 03, 2009 | 2005 Jeep Wrangler

2 Answers

Brake lights not working but third brake light works?


Check your fuse for the brakes, if fuse is blown replace. If not fuse go buy a package of brake light bulbs at the auto store. Then replace the bulbs.

Hope this helps

Matt

Jul 02, 2009 | 1999 Ford Expedition

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...