OK. The door handle has one screw that holds it in place. after removeing the screw the unit will be lose so to speak. You will also have to remove the window handle as well. The window handle can be removed with a screwdriver and a pair of needle nose pliers. first put the screw driver tto the back side of the window handle. Press gentlly against the door panel so you can see the "C" clip which you will need to remove. After removing the "C" clip and the window handle you are ready to remove the door panel which is just snapped on to the door with several plastic pins which should unsnap easily. It wouldn't hurt to use your srewdriver to aid in unsnaping the pins. once you have the door panel off you should be able to see how the old door handle is connected. good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Feb 2, 2012 - Uploaded by 1A Auto Parts
How To Install Replace Inside Door Handle Chevy Equinox 05-09 1AAuto.com .... found your tutorial on fixing my driver's side door handle for my 2006 Equinox. .... Door Handles Chevy Equinox 2010 2011 2012 GMC Terrain ...
Apr 2, 2015 - Uploaded by 1A Auto Parts
http://www.1aauto.com/interior-door-handle-driver-side-front/i/1adhi00417 1A Auto shows you how to repair, install, fix,change or replace a broken or snappe... ... 10, 11, 12, 13 Chevy Silverado, Tahoe, Suburban and GMC Sierra, Yukon Denali ...2007-2011 Tahoe Yukon Suburban Escalade Vent Section ...Missing: terrain
Make sure window is up. Remove inner door panel. Disconnect latch mechanism. Should be a few nuts holding handle on. Unscrew them. Install front door outside handle frame sub-assembly. Using a torx wrench (Usually T30) install the outside handle.
i have the same problem on my 1995 grand prix gtp 2 door coupe...the only differnce is that i had door poppers installed and took off the lock rod, turnes out the solenionds cant pull the latch open, so i need stronger solenoids. but my door wont open either...if anyone has any fixes to this problem let me knows ASAP!! i cant crawl thru the passenger side in the middle of a S. Dak. winter...
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door