Question about 2004 Dodge Intrepid

1 Answer

Clicking noise...car won't start

The car won't turn over at all. When I go to turn it on the panel lights up then when i turn the key the panel goes off for a second and you hear the click noise then the panel returns but the car does not start at all or even acts like it is going to start. I tried the other suggestion of pulling on the fan belt while the car is in neutral and that did nothing. Do you have any other suggestions??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

Well if when turning the the key and you get a flashing dash lights that tells me that your ignition module is bad. i would also check the connections under the dash you could have a shoryt or a few loose wires.

Posted on Sep 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start, clicking noise when key is turned


sounds like a dead battery ---turn on dome light and turn key to start if dome light goes out or dims very low than battery needs boost or replacement--if light not affected check ignition system -key -not worn down(didnt specify yr and vehicle)relays fuses and connections to starter and starter itself-------also have starter checked may be have short

Jul 14, 2015 | Cars & Trucks

1 Answer

My 2000 Pontiac Montana won't start. I hear a clicking noise from the back but the starter doesn't engage


have somebody hit the starter with a hammer while somebody turns the key on the start position as he holds the key keep hitting the starter not at the solenoid at the round part if it tries to start then you have a defective starter now if you have a alarm system you are going to have tutoo isolate the starter to do a different test.

Apr 16, 2013 | Cars & Trucks

1 Answer

MY 02 CHEVY TRAILBLAZER GOT CRAZY,AT CLUSTER PANEL, ALL NEEDLES MOVE UP AND DOWN WHEN SWITCH ON AND ALL LIGHT ARE ON, BUT WON'T START


It is normal for the cluster to do that, it is doing its doing a self check on the cluster. What else happens when you turn the key, dose it make a clicking noise or does all the light go dim? Need more info?

May 17, 2012 | 2002 Chevrolet TrailBlazer

1 Answer

Car won't start . Clicking noise wen key is turned


It's your starter. Find location of your starter. By the flywheel. Then. Bang on it . Your car will start. You still need to replace the starter.

Dec 08, 2011 | 2004 Honda Accord

1 Answer

My 2004 f150 wont start. i drove it to the store and everything worked fine. when i came out of the store, the truck won't start. when i turn the key nothing happens. i can hear a clicking noise coming...


I would check your battery. I would also look for loose grounds. The clicking you hear is your fuel pump turning on. I would check your battery voltage and, have the battery load tested.

Sep 04, 2011 | 2004 Ford F150

1 Answer

Electrical Problem and now won't start


One common problem is with intrument cluster solder joints where the cable connector attaches to the circuit board. Solder joints fracture. Resolder. Use Hanes manual to get dashboard apart.

Indication is instrument panel goes dead and car sometimes will not start.

Other possibilites are loose connectors or poor connections in cable harnesses.

Jan 22, 2009 | 1998 Dodge Grand Caravan

Not finding what you are looking for?
2004 Dodge Intrepid Logo

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...