Question about 1997 Oldsmobile Cutlass Supreme

4 Answers

Power windows all 4 windows have no power

Posted by on

  • 8 more comments 
  • vlumba Jan 11, 2009

    all power windows do not work, fuse is ok..

  • euro351 Jan 19, 2009

    my 98 olds intrigue power windows dont work.radio works,interior lites work,radio works,moon roof works.can anyone help.

    thanks euro351

  • cflores953 Jan 29, 2009

    I have a 2002 ford explorer, my windows will not roll up, I"m thinking its a fuse but I don't know where to find the fuse for the windows

  • loral73 Feb 04, 2009

    no power to all 4 windows i have replced the fuse it does have a window lock

  • deezsign07 Feb 13, 2009

    2004 Sonata, all windows/locks, and side mirrors, don't work, check fuses, for them, but seem ok. anything else? what fuses should I check?

  • FAITH CLAFLIN Feb 13, 2009

    i have a 1998 cherokee sport and this week all my windows wont work. The led's are all not lit. Today they lit up when i started the car and it let me drop the window about 2 inches and then the led's went out and I cant get the window back up. The led is lit on the front passenger side window but it wont let me operate that window either. The power locks only work with the key control.

  • Anonymous Mar 07, 2009

    1990 Buick Century

    The windows do no work yet the other power accessories do.
    Checked fuse box
    Checked Wiring in door



  • rdsrolltide Apr 03, 2009

    96 Buick LeSabre all 4 window quit working. Even at each door window switch kind find relay. Replaced what I thought was Circuit Breaker under hood didnt help.

  • FAITH CLAFLIN May 11, 2010

    is the solution from crose2573 for a jeep cherokee or another vehicle or related to all?



    thanks

  • Billy Chan May 11, 2010

    Check two things first:
    1. Does the power door still work? If not, the circuit breaker under the dash is likely blown.
    2. Do the windows other than the driver side operate under the individual control? There is a power cord between the driver door and compartment at the hinge that sometimes gets torn or loose.


×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Under the dash next to the steering columb there is a control module for the power windows. this has a series of relays inside. Toggle the switch on one of the doors with the power on and you should hear a clicking noise coming from the box. If no noise, check relays and fuses under the hood near battery before replacing the control module.

Posted on Jan 11, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

If all windows do not work , (In my case) connector came loose behind the window switches, Pry open the switch cover ( driver side arm rest) check connector. , there are no screws to open. It is easy.

Posted on Jan 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The battery is under the back seat

Posted on Jan 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Alternatively, pull the rubber grommet between the driver door and fender of the car apart and see if any of the wires cracked. This can cause all 4 windows to fail, and was the problem on my Aurora.

Posted on Jun 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both rear power windows go up slowly,4-5 switch hits before they completely up


Sounds like your rear power window motors are worn and tired, try spraying silicone spray in the window channels, if that don't help replace both motors.

Dec 22, 2015 | Cars & Trucks

1 Answer

Resetting the power windows and convertible top on a 2004 Volkswagon Beetle


GET INSIDE THE CAR AND CLOSE ALL DOORS.SWITCH IGNITION ON.USE BOTH UR HANDS TO {AT THE SAME TIME} LIFT ALL 4 WINDOWS UPHOLD THE BUTTONS UP UNTILL ALL WINDOWS ARE UP.RELEASE AND HOLD UP AGAIN.REPEAT AT LEAST 4 TIME .THEN U PUSH ALL 4 BUTTONS DOWN!!!HOLD THERE UNTIL ALL 4 WINDOWS ARE DOWN . REPEAT STEP AT LEAST 4 TIMES!!!SWITCH IGNITION OFF AND ON.U NOW HAVE THE COMFORT BACK!!!!LET ME KNOW IF U STILL HAVE ANY PROBLEMS!!

Apr 06, 2014 | 2004 Volkswagen New Beetle Convertible

2 Answers

No power at power window switch


Click the link below to troubleshoot the problem:--
Power windows not operating?http://whoisbyme.blogspot.in/2012/05/car-window.html

----------
Thanks.

Jun 21, 2012 | 1999 Jeep Cherokee Grand 2WD

1 Answer

Sunroof will not work


Power is supplied to the Power windows and sunroof through the power window circuit breaker. That circuit breaker is supplied power through the RAP (retained accessory power) Relay, the RAP relay also supplies power to the radio. The RAP relay is also fuse protected by the RAP fuse in the under hood fuse block. The RAP relay is energized by the BCM body control module.

The RAP relay is responsible for the radio and windows working after the igntion is turned off.

The first place to check would be the RAP fuse in the under hood fuse block and then the RAP relay in the Body fuse block.

A list of the BODY relay block located on the left side of the dash to the right of the interior fuse block is below:

(1) Park Lamp Relay (2) Courtesy Lamp Relay (3) Retained Accessory Power (RAP) Relay (4) Power Seats Circuit Breaker (5) Power Windows Circuit Breaker (6) Inadvertent Power Relay (7) Door Lock Relay (8) Headlamp Ground Relay (9) Driver Door Unlock Relay (10) Door Unlock Relay(1) Park Lamp Relay
(2) Courtesy Lamp Relay
(3) Retained Accessory Power (RAP) Relay
(4) Power Seats Circuit Breaker
(5) Power Windows Circuit Breaker
(6) Inadvertent Power Relay
(7) Door Lock Relay
(8) Headlamp Ground Relay
(9) Driver Door Unlock Relay
(10) Door Unlock Relay
(1) Park Lamp Relay (2) Courtesy Lamp Relay (3) Retained Accessory Power (RAP) Relay (4) Power Seats Circuit Breaker (5) Power Windows Circuit Breaker (6) Inadvertent Power Relay (7) Door Lock Relay (8) Headlamp Ground Relay (9) Driver Door Unlock Relay (10) Door Unlock Relay (1) Park Lamp Relay (2) Courtesy Lamp Relay (3) Retained Accessory Power (RAP) Relay (4) Power Seats Circuit Breaker (5) Power Windows Circuit Breaker (6) Inadvertent Power Relay (7) Door Lock Relay (8) Headlamp Ground Relay (9) Driver Door Unlock Relay (10) Door Unlock Relay

Jul 10, 2010 | 2000 Chevrolet Blazer

1 Answer

Power window motor


THERE WILL BE 2 10mm NUTS THAT HOLD THE GLASS TO THE REGULATOR, REMOVE THOSE. THE REGULATOR IS HELD ON BY THE WINDOW MOTOR, THERE IS 4 RIVETS HOLDING THE MOTOR GRID THOSE RIVETS AND THE MOTOR AND REGULATOR WILL COME OUT. REPLACE MOTOR AND REGULATOR INSTALL 4 RIVETS SIZE 1/4" DIA GRIP RANG 032" AND ATTACH WINDOW WITH NUTS TO REGULATOR.

Nov 05, 2009 | 1996 Pontiac Sunfire

1 Answer

I need instructions on how to replace power window motor for the front driver side window of a 2002 Grand Cherokee


Power Window Motor: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the window regulator from the door.
3. Place the window regulator on a suitable work surface and remove the screws that secure the power window motor to the window regulator.
4. Remove the power window motor from the window regulator.
INSTALLATION
1. Position the power window motor onto the window regulator.
2. Install and tighten the screws that secure the power window motor to the window regulator. Tighten the screws to 9 Nm (80 in. lbs.).
3. Install the window regulator onto the door.
4. Reconnect the battery negative cable.

Oct 30, 2009 | 2002 Jeep Grand Cherokee

2 Answers

How do I fix the problem of all 4 power windows


See if you have power coming out of the master power window switch when a button is pushed down. Remove a door panel and check for power at the window motor with the switch pushed. If you do not have power it could be the master switch. Good luck.

Aug 06, 2009 | 2002 Ford Explorer

2 Answers

Power Window Issue


I would say there is a fault with the wiring to the connection from the power to the windows, maybe loose wire or shortcircuit?

Jun 09, 2009 | 2005 Chevrolet Malibu

Not finding what you are looking for?
1997 Oldsmobile Cutlass Supreme Logo

8,425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...