Question about 2001 Ford Taurus

1 Answer

REPLACE FORD TAURUS WAGON DRIVER SIDE MIRROR

HOW TO RE- INSTALL LOOSE FORD TAURUS WAGON DRIVER SIDE MIRROR ASSEMBLY

Posted by on

  • 2 more comments 
  • MetroEagle Jan 06, 2009

    Model Taurus 2004 attempting to remove the inside mirrr panel I cracked the inside mirror panels screw housing, will I need to buy a new inside mirror panel and if so where

  • Anonymous Mar 22, 2014

    it came loose at the top & looks like it needs glue, I'VE tried but nothing seems to stay as there is a lot of pressure to keep peeling it away

  • Anonymous Mar 24, 2014

    Wants to start but won't

  • Anonymous Mar 30, 2014

    vacuum leak on red line going to the transmission. It appears to be the venturi and the boots that connect it to the line. Which direction is the venturi replacement to be installed?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

You have to take the door panels off. remove all screws you will have plastic pieces called christmas trees that hold the panel in place. there is a tool for this you can pick it up at Napa for cheap this will allow you access to the inner space of the door un plug plugs to power switchs and the rod to your door catch hardeware you then can remove panel completely to get access to mirror assembly. installation of door panel is in reverse

Posted on Aug 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where on a 1991 ford taurus wagon is the key code for the ignition


Replacement Ignition lock cyclinder for 1991 - Taurus Car Club of ...

www.taurusclub.com > ... > Maintenance and Repair
May 21, 2014 - I have a Ford Taurus 1991 6cyl 3.0L. I am looking on the RockAuto site. ... Drives: '90 Taurus GL Wagon 3.0L; '65 Rambler Ambassador 990 convertible ... I have the key code for the Ford, but do not know how to relate it to ... Ignition Problems
Apr 9, 2012
Lost Keys
Sep 24, 2006
Ignition Problem: Car Wont Start & Key's Loose?
Apr 25, 2006
Programming Pats, Keyfobs, & Keyless Entry
Jul 7, 2004
More results from www.taurusclub.com

Ford Keying Systems - How They Work - Taurus & Sable ...

www.taurusowners.com > ... > Maintenance & Repair

Jul 22, 2013 - 5 posts - ‎4 authors
The square-head 10-bit key operates the ignition and door locks, and the ... I believe the first three digits are the ignition code and the last three are the door code. ... 1992Ford Taurus GL wagon - 232 - sold, was later wrecked ... --Beige 1991 Mercury Grand Marquis LS Colony Park Wagon ' 5.0 V8/AOD ...

Ford 10 Cut Ignition Svc. - YouTube

? 13:45
https://www.youtube.com/watch?v=r6mposGhsuI
Sep 23, 2010 - Uploaded by William Mcintosh
Ford, 10-cut ignition removal and new ignition installation process. ... I have an 91 windstar, lost key and ...

Dec 12, 2015 | Ford Cars & Trucks

1 Answer

How do I replace a outside minor on a 2005 ford Taurue


There are three bolts that hold it on. PLus the wiring. The triangle above the door panel pops loose, behind the mirror bracket. Be careful, it has a tab that goes down behind the door panel. Pop it loose, you can pull it down far enough to access the 10mm nuts.

Oct 01, 2014 | 2005 Ford Taurus

1 Answer

On my 2008 ford F350 the driver side mirror marker lights are not working. I need to know how to repair them. Thanks


If it's just that the bulbs that have burnt out you'll need to position the exterior mirror glass inward toward the vehicle.(Note: Use caution to not trap the side lamp assembly wiring during installation, or damage to the wiring may occur.) Using a flat blade screwdriver or something similar, push the mirror side lamp assembly forward while releasing the retaining clip. Separate the bulb holders from the mirror side lamp assembly and remove the side lamp. Replace the bulbs and reassemble. I hope this helps you out.

Mar 08, 2011 | Ford F-350 Cars & Trucks

1 Answer

Need instructions to replace the passenger side mirror and the driver side tail light on a 1999 Ford Taurus 4-door sedan. Thank you, Gary S.


Section 01-09: Mirrors, Rear View 1999 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/25/1998 Mirror, Power-Outside Rear View Removal
  1. Disconnect battery ground cable (14301).
  1. Remove front door trim panel (23942). Refer to Section 01-05.
  1. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger.
  1. Remove two screws from cover assembly.
  1. Disconnect outside rearview mirror wiring connector (C515-LH; C615-RH). Remove wiring guides as necessary.
  1. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror (17682) while guiding wiring and connector through hole in door.


an0786b.gif


Item Part Number Description 1 17682 Outside Rear View Mirror 2 N621906-S36 Nut (3 Req'd) 3 F8DB-17D699-
AAW Cover Assembly Rear Substrate-LH 3 F8DB-17D698-
AAW Cover Assembly Rear Substrate-RH 4 N808968 Screw 5 F8DB-18B984-
AAW Speaker Grille-Standard (No Badge)-LH 5 F8DB-18985-
AAW Speaker Grille-Standard (No Badge)-RH 5 F8DB-18K901-
BAW Speaker Grille-Mach-LH 5 F8DB-18978-
BAW Speaker Grille-Mach-RH 5 F8DB-238A35-
AAW Speaker Grille-Blank (No Speaker)-LH 5 F8DB-238A34-
AAW Speaker Grille-Blank (No Speaker)-RH A - Tighten to 6-8 Nm (54-70 lb-in) ------------------
Trim Panel, Door Front
Removal
  1. Remove cover behind inside door handle.
  1. Remove screw from bottom of pull cup retaining front door trim panel to front door (20124).
  1. Remove three screws retaining front door trim panel to front door.
  1. NOTE: Do not attempt to remove more than one pushpin at a time.

    Using Rotunda Windshield and Molding Trim Removal Kit 107-R0401 or equivalent, remove the door trim panel by pulling one door trim panel pushpin at a time from the inner door skin.
  1. Disconnect electrical connectors as necessary. Refer to Section 01-14A.
Installation
  1. Follow removal procedure in reverse order.
  1. Replace all pushpins with new pushpins (N808994-S).
Front Door Trim Panel


ar0318d.gif

Jan 14, 2011 | 1999 Ford Taurus

1 Answer

Driver's side exterior mirror has broke loose. How can I get at the back of it to secure it?


on the inside of your door(opposite of the mirror) should be a screw that allows access to the back of the mirror.

Jul 07, 2010 | 2001 Ford Taurus

1 Answer

Need to replace passenger side mirror assembly on 1996 Ford GL Wagon.


1. remove the door panel by pulling lightly on the door panel.
2. remove the tweeter (small black thing in the corner of the door in front of the mirror).
3. unplug mirror if electric
4. remove the 3 mirror retaining bolts
5.replace with new mirror and reverse these steps

Feb 02, 2010 | 1996 Ford Taurus

1 Answer

Passenger side mirror replacement procedures


If its a power mirror there is more thing you will have to remove to get to the wires but if not there is a screw on the corner piece on the inside of the door. just pull the screw out and the bolts (3) that hold the mirror on are behind it. If it power then you will have to remove the door panel to access the wiring to disconnect it

Jun 21, 2009 | Ford Taurus Cars & Trucks

1 Answer

OUTSIDE PASSENGER SIDE MIRROR. 2001 TAURUS


the Glass element or the glass and backing assembly? if just the glass it is just glued on, Scotch two sided tape works as well, if the Glass and backing fixture it just snaps in and out of the drive motors.

May 28, 2009 | 2001 Ford Taurus

1 Answer

Stop light bulb replace


Believe it or not, for the Taurus wagon, Ford wants you to take it in to the shop. The Taurus wagon tail light assembly is really a stupid design. I will do my best to describe it here. You must remove the two phillip screws on the tailight assembly, seen when you have the hatch door up. The trick is the assembly is still held with a hinge type, snap in deal that holds the front part of the assembly tight to the body side. You might be able to see or access it from inside the spare tire cover or the access door on the passenger side. Being oh so careful to release the clip so you can pull the assembly free to change the bulb. Hope this is some help.

The tail lamp / break lamp uses bulb number 3157.

May 02, 2009 | Ford Taurus Cars & Trucks

Not finding what you are looking for?
2001 Ford Taurus Logo

516 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...