My right turn signal works fine but my left one does not.When i turn on the right it make the clicking sound and lights up but the left dont make a clicking sound or light up. same happens when i turn hazards on. How do i fix this. Thanks..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
have you checked the bulbs front and back. to see if they work, bulb check. then it sounds like you might have a bad signal flasher that only works the left side and not the right side. or if a bulb at the front or the rear gets bright but not the opposite bulb on the same side then you may just have a bad bulb or socket or power to the socket when doing the bulb check.
flasher/blinker is busted. this is located under your dash board. remove steering column cover, turn on LEFT turn signal (yes, the one that is working), then you will hear a clicking sound. locate the relay that causes the sound. there you can see 2 relays (one for LEFT, other one for RIGHT turn),replace busted one.
the light in th DASH-BOARD IS out, if you hear clicking & outside is click-g,theres not a fuse,for signals, there is a flasher-relay chk under dash or by th kick-panel or next to FUSE-CLUSTER(BOX),
HOPE this helps, good-luck...
Replace the turn signal switch. Bad contact inside causing a crossing of the circuits. When the turn signal is applied it should open the brake light circuit allowing for just the signal to work. Doesn't sound like the switch is doing it's job.
Rear lights are double filament bulbs one side for the lights other side for the brake/turn signals so it still may be a bulb. Do u have a test light or volt meter you can check to make sure u have power there when brakes or turn signals are activated. Or just try another bulb.