Make Kia fix it!!!!! It is a real problom they will tell that your doing somthing wrong tell them to quit feeding you a line of **** and fix it. We had the same Identical problom it was in the wiring. tell your
dealership to contact kia in athens ga. maey they can tell them what they done
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi yes this can be done, here is how
make sure you have all keys ready to reprogram
close all windows and doors
insert key into drivers door lock
within 5 seconds of putting key in door lock turn key to unlock position 3 times
this puts the key into programming mode ( door led should be on )
press and hold lock button, within 5 seconds of holding lock button
press unlock button 3 times ( keeping lock button pressed at same time)
then release lock button
that should be it...to make sure correct programming is achieved key led flashes 5 times, and door led flashes 6 time, if you have more than one key do same as above within 15 seconds of doing the first key..
phew..lol, well i hope that will work for you..please vote thanks
Sounds like they disconnected your battery when they were working on your car. Your radio probably requires an unlock code to get it to work again which you'll have to get from a dealership with proof that the car is yours.
They key fob will also have to be reset.
Close all the vehicle doors.
Insert the ignition key into the ignition lock cylinder.
Press and hold the door unlock switch.
While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
Press and hold the LOCK button and the UNLOCK button simultaneously
on one transmitter. After a delay of approximately 15 seconds, the
doors will lock and unlock to confirm the programming of that
Turn the ignition switch to the On position in order to exit the keyless entry transmitter programming mode.
Operate the transmitter functions in order to verify correct system operation.