Question about 2000 Audi TT

1 Answer

Flashing Unit for Indicators Replacement

Indicators work but do not flash. Hazard lights work and flash.

Posted by on

  • Anonymous Mar 24, 2014

    when the indicators fail to work nether do the hazard warning lights, but all lights flash when you lock the doors

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Most likely it's the hazard switch - the relay for the hazards and the turn signals is built into it. When they start to die, you will see erratic behavior with the turn signals and/or hazards, and eventually they'll both fail completely. Replace your hazard switch on the dash and you'll be good to go.

Posted on Aug 31, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: HAZARD LIGHTS ON BUT NOT

HI,
I have the same problem - it is the relay switch attached to and behind the hazard warning triangle on the dashboard. Pull it all out (gently and replace (£60 ish). The indicators and hazard lights are on the same relay circuit. This is a well known problem for this car (amongst others - how about the wipers sticking)

Posted on Nov 25, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

02 Buick LeSabre Ltd. Rear flashers work (blinking rapidly), front bulbs stay on, inside indicators also flash rapidly. Replaced control module under the dash. Did not help. What else could it be?


Hi there., when flashers/indicators work rapidly on the dashboard you should check whether it is the same on the actual bulds. Fadt flashing is usually a sign of a bulb failure somewhere. If everything is functioning ok externally I would consult a competent technician for a diagnosis.

Jun 08, 2015 | 2002 Buick LeSabre

1 Answer

When I turn on either left or right indicator both indicators light up


try pushing the hazard light switch again. what you have is the hazard lights in operation ( both sides indicators working) In normal indicator operation power from the flasher unit is directed to which ever side you select but by pressing the hazard light switch the indicator power lights up all lights.

Nov 13, 2014 | 1987 Citroen AX

2 Answers

I have a 2005 and the hazard lights keep flashing, I don't know what to do.?


The hazard lights are only a connection of all indicator lights through the hazard light switch on the dash. Press the switch again and if there are no other problems the lights will return to the indicators only

Oct 16, 2013 | BMW Cars & Trucks

1 Answer

Turn signal lite up but do not flash I have replaced the blinker fuse and the turn signal assembly in the steering colum and thy still do not flash


Do the hazard lights work when switched on? If so it's most likely the flasher unit for the indicators is faulty or the hazard warning light switch

Mar 02, 2013 | 1993 Chevrolet Corsica

1 Answer

1999 oldsmobile aurora side marker light flash on and off when the car is turned off


Power is appliedat all times through the 20A HZRD/ STOP LPS fuse in the right rear junction block. The ORG wire connects to the hazard flasher and the BRN output wire connects to the A5 terminal of the TURN/HAZARD switch assembly. When the HAZARD switch is engaged, power is applied to the front and rear turn signals and the left and right turn indicators in the instrument cluster, causing them to flash. Obviously an open fuse, a defective flasher, a defective HAZARD switch, or a defective TURN/HAZARD switch assembly will prevent the lamps from flashing. If the turn signals operate normally, they are not the problem.

Sep 05, 2012 | 1999 Oldsmobile Aurora

1 Answer

Turn lights wont work


The indicators have a few components in their system, being: The indicator switch The Flasher Unit/Relay The fuse & wiring The bulbs The Hazard light switch.
If the hazard switch is broken or disconnected it will stop the indicators from working, so you could check that. You can check the indicator fuse, which should be labeled on the fuse cover. If it is blown, there is likely a fault that has caused it to blow, more often than not a problem with the trailer hitch or a trailer that has been towed. The next culprit is the flasher unit. They are usually found in the fuse area, it is a black box, looks much like a relay, but slightly taller. If this is faulty it will cause the indicators to either stay on without flashing, or not work at all. You can check this by disconnecting it, and connecting a test light to the terminals, one at a time while working the indicator stalk (key on) If the light lights up then this confirms the switch is okay, and the flasher is likely faulty.

Mar 24, 2011 | 1994 Ford Econoline

2 Answers

Indicators not flashing on Audi TT


i believe the audi uses two relays for the turn signals and hazzard lights so it would appear the turn relay has failed. it should be located under the dash near the steer column.... seems to me me they have some shielding under the dash so it may be hard to get to.

May 23, 2009 | 2002 Audi TT

3 Answers

HAZARD LIGHTS ON BUT NOT FLASHING, INDICATORS NOT WORKING. IF REMOVE HAZARD FUSE, INDICATORS FLASH AT HIGH RATE. (INTERMITTANT FAULT)


HI,
I have the same problem - it is the relay switch attached to and behind the hazard warning triangle on the dashboard. Pull it all out (gently and replace (£60 ish). The indicators and hazard lights are on the same relay circuit. This is a well known problem for this car (amongst others - how about the wipers sticking)

Oct 29, 2008 | 2002 Audi A6

Not finding what you are looking for?
2000 Audi TT Logo

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13215 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...