Question about 1988 Nissan Pulsar

Open Question

Broken immobiliser Hi i have a 88 nissan pulsar,my handset for immobiliser,the prong inside has snapped what are my options for getting it fixed

Posted by on

  • dodrisc Aug 31, 2008

    im desprate as i need car for work

×

4 Suggested Answers

Hentie
  • 18 Answers

SOURCE: do you have to remove trans when you replace the engine

The engine and the transmission is bolted together, it is always better to remove them at the same time, it is easier to seperate the transmission from the engine when they are both out of the vehicle.

Posted on Jan 14, 2009

  • 2920 Answers

SOURCE: 90 nissan sentra engine and trans swap to a 88 pulsar

yep they will interchange

Posted on Jan 26, 2009

  • 1 Answer

SOURCE: nissan pulsar 88 turns over but wont spark

check the sparkplugs

Posted on Jun 07, 2009

Shadowloo
  • 31 Answers

SOURCE: nissan pulsar '88. replaced starter motor, then

Is it a manual, or an automatic? Earlier Nissans sometimes have a problem with the neutral safety switch (a device that keeps the engine from rolling over in gear or without the clutch depressed.) Generally, if their bad, they need to be a little warm before they'll start, like setting in the sunlight for a few hours.

Good Luck!

Posted on May 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Immobiliser does not work - engine immoblised. Rest of electrics operate normally.


WHEN U SAY WNT START DO U MEAN CRANK OR JUST TURNS OVER WITHOUT RUNNING.. IF IT TURNS OVER AND DOES NOT START IM ASSUMING U CHECKED FUEL PRESSURE. IF SO CHECK UNDER DASH memory fuse. also check ignition fuse

Mar 24, 2014 | 1990 Nissan Pulsar

1 Answer

Immobiliser won't work.


If someone reached through the window to open the car without using the key, you have to lock it up and open it again with the key and a fully charged battery for it to start.

Mar 24, 2014 | 1990 Nissan Pulsar

1 Answer

Nissan wiring diagrams


musnt laugh here but go to the scrapper and get the right loom

Nov 02, 2013 | Cars & Trucks

1 Answer

Nissan pulsar '88. replaced starter motor, then


Is it a manual, or an automatic? Earlier Nissans sometimes have a problem with the neutral safety switch (a device that keeps the engine from rolling over in gear or without the clutch depressed.) Generally, if their bad, they need to be a little warm before they'll start, like setting in the sunlight for a few hours.

Good Luck!

May 22, 2010 | 1988 Nissan Pulsar

1 Answer

My 88 nissan pulsar 1.8 dosnt get spark


make sure the computer has a 5 volt reference signal.

Jun 12, 2009 | 1987 Nissan Pulsar

1 Answer

Do you have to remove trans when you replace the engine


The engine and the transmission is bolted together, it is always better to remove them at the same time, it is easier to seperate the transmission from the engine when they are both out of the vehicle.

Nov 16, 2008 | 1988 Nissan Pulsar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...