Question about 2003 Chrysler PT Cruiser

2 Answers

Fog lite swith stays on

My fog lite inside the car and outside my car stay on. when i use the turn signal the lites go off. do i have to replace the whole switch?

Posted by on

  • 1 more comment 
  • stopsteven Sep 29, 2008

    my front fog lights come on when i indicate to turn right. I have to tap the lever in towards the steering wheel to turn them off. do i have to replace the entire indicator arm.

  • Timmy64 Oct 07, 2008

    I have just had the same problem on a 2003 Diesel model. I had to replace the switch which I got from a breakers yard for £40 but you must get the code off the switch as there are several types.

  • Anonymous Mar 13, 2009

    my fog lights are on i can't turn them off.only goes off when turning.



2 Answers


Posted on Sep 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You can fix this problem if you take the multi function switch apart. It is caused by a slightly deformed plastic part that the stalk pushes on. You can build the deformed part up with Araldite & problem fixed. You have to be good at taking things apart.

Posted on Nov 29, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

01 pt cruiser right high beam light won't work.

In the diagram for headlamps, the top wire is voltage, the bottom wire is ground. You can use a test light to check voltage and ground. To test ground, one end of test light touches battery voltage the other end touches ground wire terminal, if the lite comes on, the ground is good enough to lite the test light. You know how to check voltage with test light, correct?

Feb 14, 2018 | Cars & Trucks

1 Answer

2000 caravan headlights stay on. And no tail lites but brake lites and turn signals still work and horn beeps randomly on its own.

Replace the turn signal switch. All exterior lights run threw it, except the high mount brake light. The horn also. If the head light switch is on the handle, this should take of it also. If the headlight switch is in the dash, you might have to replace it also if they stay on.

Sep 27, 2016 | 2000 Dodge Caravan

1 Answer

Jeep liberty problems

turn head liteson and fog lites the signal lites comes on i n dashand turn signal lite flash real fast rh side onleyfog lite on lite does not work

Jan 02, 2014 | Cars & Trucks

1 Answer

Fog Light Problems in 2004 Boxster S I pull the

Hi John, It sounds to me like your switch is bad. I would order a new one and replace it. if that doesn't work you can usually return the switch. just be sure and check the return policy.

Sep 10, 2013 | 2002 Porsche Boxster

1 Answer

Exterior warning lite stays on

The corning light only works when the turn signal is on is normal.
What are you talking about with an exterior warning light ? The light on the dash that tells you one of the exterior lamps is not working ?

Aug 19, 2012 | 2000 Ford Windstar

1 Answer

One headlite goes out in less than a min. then stays out. The same side fog lite was knocked out recently and has not been replaced. How can I make the headlite stay on?

sounds like the fog light is shorting out the system, and if its on the same side as the headlight, the filament in the bulb could h ave received damage also check the connections on each light, and also check the bulbs with a meter

Jul 06, 2011 | 2001 Nissan Quest

2 Answers

How do I remove the headlight cover to clean the inside part of the headlight cover. It appears to be fogging making the lights seem dim.

you are talking aftermarket headligth covers? , the head lite itself cant not be taken appart, your best bet is to drill a small hole in the lower part ofthe headlight so moisture can be release, this will help but in the long run you'll need to replace it

Oct 02, 2010 | 2007 Toyota Corolla

1 Answer

Lights will not turn off, brights blue lite on all the time, lites will dim but bright lite stays on, must disconnect bat when car not in use

Your turn signal/headlight multifunction switch has failed.

To replace it, remove the four screws from the bottom of the steering column cover, split the cover apart.
Unplug the one connector out of the bottom of the headlight switch, then depress the two levers, on top and bottom of the switch housing, and slide the switch out.
Install in reverse order.

Oct 15, 2009 | 2002 Mitsubishi Galant

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides