Question about 1989 Honda Accord 4 Door

1 Answer

Headlights light up ok but will not fold down when lights turned off. headlights can be manually folded and come up ok when lights turned on.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 178 Answers

Hello for the lights check your vacuum lines that go to your headlight doors to make sure there not dry rotted or leaks if okay see if there is a inline orfice installed in the vacuum lines either from the vacuum cannister to the doors usually plastic and acts as a tee lets air in oneway stops air from going back the way it came goodluck

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 chevrolet tahoe how do I fold The seat down


The second row is folded by first pulling up the rear of the seat cushion and folding up 'til it's behind the back of the front seat. Then the back of the seat folds down where the seat cushion was.

The third row seats have several levers that are numbered in the sequence they are to be operated. First fold the seat back down on to the cushion and then flip the whole seat up 'til it's vertical and latched.

This is described in the Owner's manual if you can find one.

Mar 15, 2015 | 2003 Chevrolet Tahoe

1 Answer

2nd Row Headrest Stuck in Upright Position and will not Fold for Stow n Go


You will need to take the seat apart to determine what is not fastened to release it.

Apr 09, 2014 | 2011 Chrysler Town and Country

1 Answer

Rear seat wont fold down in pacifica 06


third brake light wont work it connected to a circuit board?

Nov 12, 2009 | 2005 Chrysler Pacifica

2 Answers

Dash board lights on grand voyager flashing when engine on. car would not start so charged bat over night. Then bought a new bat. have changed battery and still happening. Did altinator test lights dipped...


the controls always click when you change the setting as it is electronic, don't panic, but you should ask your ex as he is well up in voyager' s and the back seat not folding down properly!!!!!

Jun 20, 2009 | 2000 Chrysler Grand Voyager

2 Answers

1987 GMC VanDura electric fold-down seat


If it's anything like my 1994 Vandura, you have a small panel of rocker switchers above the rearview mirror for turning your interior lights and other gadgets(tv, vcr, etc) off and on.

The leftmost switch on mine moves the electric bench seat up and down, *and* forward and back. The trick is that you have to hold it down to make it move.

With mine, even though there are four actions:
- slide seat forward
- slide seat backward
- fold seat down
- fold seat up
there is only one rocker switch.

So what you do is hold "up" on the switch and see what it does. If it slides the seat in either direction, up for your van is for both sliding forward *and* back. To do the opposite direction, just wait a second then press the same button the same way a second time.

If up makes it fold, it's the same principle. Hold the rocker switch depressed in the up position to make it fold up. Wait a moment and repeat to make it go down.

It wasn't intuitive for me either but once you know and play with it a bit it makes sense. Probably better than having four switches up there anyway :)

Good luck!

Jan 26, 2009 | 1987 GMC VanDura

1 Answer

97 F-350 Headlight door removal


The front couple bolts (enough to fold the inner fender wells) on the fender wells (plastic part around inside the wheel well). Take them out, I think i did 6. Basically, just do what you have to do to fold the front part of that plastic inner fender well enough to see behind the parking light, then you need to remove the parking light/corner light assy. and once they are out you can reach the final screws required to remove the headlight trim rings. Also there are a few people on EBAY that are selling replacement headlight/parking/corner light assemblys that have clear outer lenses that dont get all yellow and foggy as the stock ones do. I bought smoked ones that have a light tint to it and they have projector caps so you can use HID kits and get a nice beam. something you might want to look into if your going to do the trim rings since its kind of a p.i.t.a.

Oct 15, 2008 | 1997 Ford F350 Crew Cab

2 Answers

Replace front driver signal light bulb


Depending on whether it is the front or the back turn indicator light will determine on what needs to be done. If it is the front turn indicator light open the hood of the car you may need to take the entire headlight out. The headlight may have screws, take the screws out then the front light will come out from the outside of the vehicle replace the burned out bulb. The bulb should snap right in and then put the headlight back in make sure you put all screws back in from the inside of the hood. Step2 If it is the back turn indicator light, go through the trunk of the vehicle. If there is a panel covering the lights you must unscrew the panel and then replace the burned out light bulb. Some panels can be folded down without removing all of the screws to access the lights. This light may not require for you to pop the entire light out you maybe able to just replace the bulb. After you have replaced it screw the panel back into place. The back light should not require the entire light to be lifted out just a simple bulb replacement. Step3 In replacing either the front or the back indicator light you must gain access to the turn signal housing which is usually in the same case as the headlight or your rear lights. It is very helpful to also get the owners manual out this will tell you exactly what type of bulbs you will need to get to replace the indicator bulb.

May 29, 2008 | 2005 Cadillac SRX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...