Question about 1997 GMC Jimmy
I need to know which is the fuel pump relay there are 3 and arent marked as to which one is the fuel pump relay
If the three relays you see are at the top of the firewall on the passenger side, they are the A/C relays.
Posted on Nov 19, 2008
El marcador de bencina dejo de funcionar, Blazer S120 4,3 año 1998, se cambio fltador pero sigue marcando lleno.
Posted on Oct 08, 2008
Generally th e markings are either in the cover or you can look in your owners manual and it will show the fuses and relays and their purpose and location. please rate this solution
Posted on Aug 30, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The fuel pump shut-off switch is
located in the passenger's foot well,
by the kick panel.
Jul 19, 2011 | 2001 Ford Expedition
Jun 09, 2008 | 1998 Audi A4
FUEL PUMP RELAY INSPECTION
1. REMOVE RELAY BOX COVER
2. REMOVE FUEL PUMP RELAY (Marked: F/PUMP)
3. INSPECT FUEL PUMP RELAY CONTINUITY
(a) Using an ohmmeter, check that there is a continuity between terminal 1 and 2. If there is "NO" continuity, replace the relay.
(b) Check that there is no continuity between terminals 3 and 5. If there "IS" continuity, replace the relay.
4. INSPECT FUEL PUMP RELAY OPERATION
(a) Apply the battery positive voltage across terminals 1 and 2.
(b) Using an ohmmeter, check that there is a continuity between terminals 3 and 5.
If there is "NO" continuity, replace the relay.
5. REINSTALL FUEL PUMP RELAY
6. REINSTALL RELAY BOX COVER
FUEL PUMP RESISTOR
1. REMOVE FUEL PUMP RESISTOR
2. INSPECT FUEL PUMP RESISTOR
Using an ohmmeter, measure the resistance between the terminals.
Resistance: 0.70 - 0.76 W at 20°C (68°F). If the resistance is not as specified, replace the resistor.
3. REINSTALL FUEL PUMP RESISTOR
If all the above components prove satisfactory, then proceed with fuel pump removal.
Access to the fuel pump & sender unit is via a service hole. The service hole is located under the No.1 Rear Seat (through the floor), so you will need to lift the rear seat & carpet, then remove the service cover.
"If this has helped you resolve your issue, please be kind enough to leave a testimonial"
Jun 11, 2011 | 2009 Toyota Land Cruiser
Mar 07, 2011 | 1994 Hyundai Excel
Jan 13, 2011 | 2004 Pontiac Grand Am
The relay and fuse for the fuel pump are located in the engine compartment
near the battery.
Fuse #9 20A* Powers Fuel Pump Relay
The relay is marked "Fuel Pump Relay" use the box lid to ID the relay position
Nov 30, 2010 | 1998 Mercury Mountaineer
Aug 16, 2010 | 1991 Dodge D150
Oct 08, 2009 | 2001 Jeep Cherokee
May 07, 2009 | 2003 Oldsmobile Alero
669 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: