Question about 1996 Chevrolet Cavalier

1 Answer

1996chevycavalier had to change the waterpump,serpantine belt came off...not sure how it goes back on

Posted by on

1 Answer

This is where I got the diagram for my '96 cav when I replaced the serpetine belt: http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528003ca13

Posted on Sep 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed my serpantine belt on 98 olds culass now im overheating and leaking coolant


Normally, this sounds like a water pump or clogged radiator...how many miles? Why were you changing the belt? Be sure to check all hoses and clamps...try looking for where the coolant leak is coming from...

Jul 08, 2016 | Cars & Trucks

1 Answer

Change a serpantine belt 120 parado


double posted and again, with no engine number
they had 7 engines
and 2 V6,
name one.
back up one post. i put up a generic answer,
despite no engine or YEAR stated. (nor country)

Feb 21, 2014 | Toyota Land Cruiser Cars & Trucks

1 Answer

I just bought a 03 Renault Megane 1.6 (Petrol) and after 2 weeks the car developed a rattling sound from the engine bay. I had my car checked and the mechanic suspects the waterpump needs replacing along...


He's just trying to upsell. The pump should have been replaced with the belt last month. I always recommend that if one goes the other should be replaced, for this very reason. Unless the water pump trashed the belt I wouldn't put the timing kit back in it. One month old... There is nothing wrong with them. But again the pump could have ate the belt, check it, if it is chewed up or missing teeth replace the belt only. And he's just giving you a line of ----, for the alignment part.

Jul 05, 2011 | 2000 Jaguar S-Type

1 Answer

Procedure on changing waterpump


  1. first drain the cooling system.
  2. loosen bolts on the waterpump pulley and remove the inner fender cover on the pass/side.
  3. remove the surpentine fan belt, note; make a diagram of the belt routing so belt will go back on the right way.
  4. remove the bolts you loosened on the pump pulley, use a pry bar to pry engine back to have enough room to remove the waterpump pulley.
  5. remove the bolts holding waterpump, you will want a pan under the van to catch coolant when waterpump is removed,
  6. remove the pump and clean old gasket off the block and install new pump,
  7. reverse to install new pump and fill system with coolant allow engine to run until thremostat opens,hope this is helpful. heres a few diagrams of the waterpump and the cover and the belt routing, good luck and hope this is helpful.
  8. e0c2b8f.png3e5449e.giff12ccdc.gif

Oct 27, 2010 | 2005 Dodge Caravan

1 Answer

How do you remove a dodge caliber serpantine belt?


take an 11/16 wrench and turn tensioner pulley towards cockpit then slip the belt off of the top idler pulley

Jun 02, 2010 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

How do I change the serpantine belt on my dodge magnum (2007)


you need to take the tension off the belt by pressing on the automatic tensioner pulley. once the tension is off the belt can be removed. the new one goes on in reverse. The new one might seem very tight. Wrap the belt around the hardest pulley(s) first

Apr 19, 2010 | 2007 Dodge Magnum SRT8 Wagon

1 Answer

How to change a 1996 chevrolet 1500 pu fan belt


this is done by locating the spring loaded tensioner and taking a 3/8" ratchet and pushing. it is only spring loaded. make sure you follow the routing diagram or if one is not handy under the hood, draw it out as to not forget. it ONLY goes on one way. make sure also that the writing on the belt, you can read it normally without having to stand on the engine. if you dont these belts have the potential to squeek like a bad pulley or belt.

Jan 06, 2010 | 1996 Chevrolet C1500

1 Answer

Need daigram for delta 88 3.8 serpantine belt.


if the old belt is still on, its quicker if you just trace how the belt goes around the different pullies on a piece of paper, or take a digital photo of the belt. that way you how to install the new one.

Dec 18, 2009 | 1995 Oldsmobile 88

1 Answer

How to change the serpantine belt


there should be a belt tensioner holding the belt on use a wrench or socket to lift or pull down and there should be a belt diagram under the hood showing you the way it goes back on try this website to see if they have your car listed www.autozone.com if they do you be able to get pictures and diagrams showing you how to repair your car also here is another website to try it www.alldatadiy.com for more auto repair information i hope i have been some help to you Michigan Man.

May 12, 2009 | Mazda B2200 Cars & Trucks

Not finding what you are looking for?
1996 Chevrolet Cavalier Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...