Question about 2000 Mitsubishi Galant

1 Answer

2000 mitsubishi galant 4 cyl.

I have a bad vibration when stopped in drive with foot on brake...release the brake and vibro stops

Posted by on

  • jerymartinez May 11, 2010

    You need to change all four engine motor mounts,dont just change 1 or 2 mounts instead all 4 mounts.we have the same car and problem after changing it all 4,shaking is gone and runs like brandnew again.buy only original parts from mitsu dealers.





    jeremy

  • Anonymous Mar 19, 2014

    my car vibrates when it comes to a complete stop while i depress on the foot brake. It doesn't when i use hand brake.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 421 Answers

Check your motor mounts by holding your foot on the brakes, set the E-brake and have someone watch the motor as you shift into reverse and touch the gas a little bit do the same in drive if the motor moves allot back and forth you need new motor and possibly transmission mounts good luck and please rate -jeff

Posted on Sep 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I own a 2000 Mitsubishi Galant, it starts when I step on the accelerator, and when I release it, it stops. The Check engine light is on. Also the engine stops When I step on the brake to shift the gear to...


You really need to get it scanned to find out the codes, helping greatly with diagnosis. Could be many things ranging from a faulty mass airflow sensor, a bad throttle position sensor, or a vacuum leak just to name a few. Getting the codes will give great direction to pinpointing the problem.

Jul 21, 2011 | 1991 Mitsubishi Galant

2 Answers

I have a 2003 mitsubishi galant, 4 cyl. whenever i take off it goes really slow like it doesnt want to change gears. (automatic) i had the trans checked & they said it's ok. could it be a fuel...


I have a similar problem...when at a stop it jerks in hesitation sometime feeling as if it wants to stall. It also does this when accelerating from stop...it has completely stalled out once when accelerating after switching from reverse to drive, but started right away.

Feb 14, 2011 | 2003 Mitsubishi Galant

1 Answer

2000 Mitsubishi Galant 4 cyl ES underhood squeal on right side


The probable causes are: 1. The drive belts are slipping. 2. The drive pulleys for some engine accessories are misaligned. 3. You have turned the steering wheel to the limits. 4. The drive belts are loose.5. Your brake drum backing plates are rubbing against the brake drum. The brakes also might be a problem. check the brake drums/discs. Finally check your wheel and wheel alignment.

May 08, 2010 | 2000 Mitsubishi Galant

1 Answer

2000 Mitsubishi Galant 4 cyl ES underhood squeal on right side


Be gentle with my rating. I am a long ways away. It sounds like a fan belt. You should pop the hood next time and see how it sounds when you have the squeeling going on. Fan belts will squeel until the get warmed up and then stop because the heat makes them grab the way they are ment too. Let me know, Raz

Apr 19, 2010 | 2000 Mitsubishi Galant

1 Answer

No overdrive


this is a hard mechanical fault in the overdrive forward clutch, u must overhaul the trans to fix this.

Jun 18, 2009 | 2000 Mitsubishi Galant

1 Answer

Vibration when applying brakes


First check the brake pads in the car ,also if the car as the ABS in it then it will generate a series of vibration when are applied brakes indicating its working ,if there excess vibration you need get your brakes checked ....

Good luck....

Dec 05, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2000 Mitsubishi Galant Logo

448 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...