Question about Chevrolet Blazer

1 Answer

Gauges in dash cuts in and out..Checked fuse #4 which is for the guages, and found no problem with the fuse..Any other suggestions PLEASE!!!

Posted by on

  • 2 more comments 
  • Anonymous Sep 01, 2008

    Got this truck from a friend and the gauges were fine on the way home but when used again the didital gauges showed no sign of working. Ive replaced the fuses and such and have tryed to find the issue but can anyone help me fix my gauges?

  • LilchevyS10 Sep 01, 2008

    Digital gauges have gone out on my 1989 Chevy S10 Ext. Cab Pickup. Checked the fuses but no problems there. Any suggestions?

  • Anonymous Dec 12, 2008

    this mornning i try to start my car up . i turn the key but it didn t do any thing my battery was good and some one told me that i need to change my ignnition switch

  • garrettsimso Dec 16, 2008

    The gauges on my digital display work but trip and mileage are all scrambled. any solutions?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

The electrical part of the ignition switch is heading south. The switch is located on the inside of the lock and tumbler and has a wiring harness that follows the inner part of the steering column.

Posted on Aug 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 GMC Sierra. The gauges do not work. All the lights on the panel work, just not the gauges. Is there a relay switch that pertains to the cluster? I checked the ipc fuse but it showed it was good.

No relay for guages. try slapping on top of dash to see if they come back on. They are controlled by a fuse and the body control module.

Jul 09, 2015 | GMC Cars & Trucks

1 Answer

My 1984 Nissan bluebird trx has a dashboard which shows temp, oil pressure and, on the driver's side, fuel guage and charge and these gauges are incremental gauges, ie they rise in increments. the fuel...

if i remember correctly there is a resister in the dash board that will need replacing, this is on the power side for both the gauges. . it will need replacing. i think a company in the 90's did a upgrade for the dash board so if its the upgrade it will be on a board. the original was on the back strip. you just cut it out and solder new one in its place to the parts left, but don't solder for to long as it can ment the strip.

Jul 01, 2017 | Cars & Trucks

1 Answer

My dash guages goes nuts when the cars is running. just sitting running if you turn on the left turn signal the car wiil die. how do i thank you

You have a wiring/short issue. I suggest you check the fuse box wires and wires around under-bonnet relays, then move onto wiring around the steering column and behind the dash displays. Remember to check earth wires too as any loose or broken will lead to power going to the gauges etc as it try's to reach ground. Check it or have it checked as it may case a fire.

Feb 16, 2010 | 2001 Dodge Neon

1 Answer

1998 Dodge Grand Caravan dash gauges go out


Sep 15, 2009 | 1998 Dodge Caravan

1 Answer

2003 Kia Optima - Dashboard Lights not working.

if you have aftermarket lights hooked up to the dash light it has been known to smoke the rheostat that controls the dimmer. I would also check the other fuses, sometimes the cluster refers to the guages themselves and not the lights that illuminate them

Jun 26, 2009 | 2003 Kia Optima

1 Answer

Will not start, no dash gauges light except "low gas level"

I have a '99 dodge dakota, 4 cyl, 5 speed manual. While researching a no start problem ran across possible solution to this problem. If no guage lights show when key truned to on position then normally a bad ignition switch. With fully charged battery and working ignition switch guage lights should slight up then go out when ignition in "on" position. Try shaking the key back and forth.


Aug 17, 2008 | 1998 Dodge Dakota

1 Answer

The gauges have stopped working ? Fuse under dash seems to be OK ?

Behind the dash is what they call a constant voltage regulator. It controls the guages. It's small and located behind the dash near speedo.

May 24, 2008 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides