How to install alternator belt in mitsubishi magna 1996 model

Owners manuals

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk01WslWOl_u3pctLBg9yPDZElrHmtQ%3A1612659189639&ei=9TkfYM2dJo7r_QbOyaSoCA&q=+2004+Mitsubishi+Magna+manual

Workshop Manual in Russian!

Mitsubishi Magna PDF Workshop manuals Free Download ...

https://carmanualshub.com > mitsubishi-magna-pdf-wor...

Feb 26, 2018 - Mitsubishi Magna & Verada PDF Workshop and Repair manuals, Wiring ... supplemented by a luxury version called Mitsubishi Verada with a V6 engine. ... series in 1996, the all-wheel drive (AWD) version was added in 2002.

http://i.fixya.net/uploads/images/5bdff5c.gif
ve got 1997 mitsubishi magna V6 and trying to find the serpentine belt...

its a serp belt

drop the serp belt off

the bolt holding the tension pulley bolt to the tensioner might be right direction thread undo

you can hit out the bearing and get a new bearing
for the existing pulley

or buy a plastic gates pulley that dont last as long

3rd gen magna repair manual pdf
this works once you find the pdf version

http://www.mediafire.com/file/cbxdztx281bg6ai/Complete_Magna_TJ_Manual.pdf

ADJUSTMENT

Excessive belt tension will cause damage to the alternator and water pump pulley bearings, while, on the other hand, loose belt tension will produce slip and premature wear on the belt. Therefore, be sure to adjust the belt tension to the proper level.
To adjust the tension on a drive belt, loosen the adjusting bolt or fixing bolt locknut on the alternator, alternator bracket or tension pulley. Then move the alternator or turn the adjusting bolt to adjust belt tension. Once the desired value is reached, secure the bolt or locknut and recheck tension.

REMOVAL & INSTALLATION

1.5L, 1.6L, 1.8L, 2.0L and 2.4L Engines

Fig. Accessory V-belt routing-Mitsubishi 1.5L, 1.6L, 1.8L, 2.0L and 2.4L engines
Alternator Belt

Fig. Loosen the adjuster lock bolt . . .

Fig. . . . then remove the alternator belt from the engine

1. Loosen the alternator support nut.
2. Loosen the adjuster lock bolt.
3. Rotate the adjuster bolt counter clockwise to release the tension on the belt.
4. Remove the belt.

To install:

1. Install the belt on the pulleys.
2. Rotate the adjuster bolt clockwise until the proper tension is reached.
3. Tighten the adjuster lock bolt and the alternator support nut.

POWER STEERING BELT

Fig. After the adjusting and fixed bolts are loosened, rotate the pump . . .

Fig. . . . then remove the power steering belt from the engine

1. Remove the alternator belt as described above.
2. Loosen the power steering pump adjusting bolts.
3. Remove the power steering pump fixed bolt on the rear of the bracket.
4. Rotate the pump toward the engine and remove the belt.

To install:

1. Install the belt on the pulleys.
2. Rotate the pump until the proper tension is reached.
3. Tighten the adjusting bolts on the pump.
4. Tighten the fixed bolt on the rear of the bracket.
5. Install the alternator belt.

A/C COMPRESSOR BELT

1. Loosen the tension pulley and remove the belt.
2. The installation is the reverse of the removal.

3.0L DOHC, 3.0L SOHC Galant, and 3.5L Engines

Fig. Serpentine belt routing-Mitsubishi 3.0L engines (except 1998-00 Galant models)

Fig. Accessory V-belt routing-Mitsubishi 3.5L and 1998-00 3.0L SOHC Galant engines
ALTERNATOR AND A/C COMPRESSOR

1. Disconnect the negative battery cable.

CAUTION Wait at least 90 seconds after the negative battery cable is disconnected to prevent possible deployment of the air bag.

1. Raise and safely support the vehicle and remove the front undercover.
2. Loosen the tension pulley fixing nut and relieve the tension on the belt by turning the adjusting bolt.
3. Remove the belt.

To install:

1. Install the belt on the crankshaft and alternator pulleys.
2. Using the adjusting bolt on the tensioner, tighten the belt to the desired tension.
3. Tighten the fixing nut to hold the adjustment.
4. Install the undercover and lower the vehicle to the floor.
5. Connect the negative battery cable.

POWER STEERING BELT

1. Disconnect the negative battery cable.

CAUTION Wait at least 90 seconds after the negative battery cable is disconnected to prevent possible deployment of the air bag.

1. Raise and safely support the vehicle and remove the undercover.
2. Remove the alternator and A/C compressor belt.
3. Lower the vehicle and remove the cruise control pump link assembly.
4. Place the power steering hose under the oil reservoir.
5. Loosen the tension pulley fixing bolts and remove the power steering pump drive belt.

To install:

1. Install the power steering pump drive belt.
2. Insert an extension bar or equivalent into the opening at the end of the tension pulley bracket and pivot the pulley to apply tension to the belt.
3. Tighten the fixing bolts.
4. Raise the vehicle and install the alternator and A/C compressor belt.
5. Install the undercover and lower the vehicle.
6. Connect the negative battery cable.

3.0L SOHC Diamante

1. Disconnect the negative battery cable.
2. Loosen the lockbolt on the face of the A/C tensioner pulley.
3. Turn the adjusting bolt of the A/C tensioner pulley to loosen the tension of the A/C belt.
4. Remove the A/C compressor belt.
5. Loosen the locknut on the face of the power steering/alternator tensioner pulley.
6. Turn the adjusting bolt of the tensioner pulley to loosen the tension of the belt.
7. Remove the power steering/alternator belt.

To install:

1. Install the power steering/alternator belt first and then the A/C compressor drive belt.
2. Adjust the belts to the proper tension by turning the adjusting bolts and tighten pulley fixing nut/bolt.
3. Tighten the mounting nut of the power steering/alternator tensioner pulley to 36 ft. lbs. (50 Nm).

You need to have the Alternator tested, the battery symbol indicates the system voltage is low. The other problems are due to the low voltage.

Malfunction in the charging system. Have your alternator tested, it's probably bad. Do it soon or your battery won't have enough charge to start the car.

losen the top and bottom bolts on the alternator and the top bolt? has a another bolt head behind the alternator ear its a adjust screw turn it clockwise with a either 12mm or 13 mm socket rachet and extention

[email protected] did you replace both the timing belts? this car has an A belt and a B belt (B is for the balance shaft) email me

Haynes Manual is probably the best solution for you.

i have a 96 te magna workshop manual at home as i no longer have the car its yours if u want it my email is [email protected]