Question about 1998 Ford Explorer

1 Answer

Detergent door The detergent door does not open when in wash cycle it opens when the dishwasher door is opened

Posted by on

  • Curt Downs May 11, 2010

    I think you should not try to wash a ford explorer in a dishwasher, you really should bring it to the car wash./ The detergent door won't open 'cause the explorer is a tight fit. countrycurt0 PS better move this out of autos.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Is your tray dish rack in the right way it is toclose to the door not in al the way

Posted on Sep 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door locks cycling and windows open


dear .if you use key to open ,then you hold key it will open all doors locks and windows ,so , insert key again then move little try to close and hold ,check if key is move smoothly, this case need to replace driver door key cylinder

Dec 18, 2013 | Skoda Fabia Cars & Trucks

1 Answer

98 accord door handle broke door will not open


A non electric door, (which?) wont open,lock works ok, handle wont open the door.
What can I do to fix it.
well telling the door to us would help, and options.
so no electric locks,
there are 2 levers. one inside and one outside.
so you pull the door card (inside door covering)
and look at both locks , the inside pull, its it working?
then look at the key lock cylinder. is it connected still
and last are both connected to the latch mechanism.
one can cycle this latch lever inside the door shell.
if that fails the latch is busted.
all this is covered in the FSM ,why not read it.? (under body)
free , too.
http://hondatech.info/downloads/Auto/Manuals/Accord/

Nov 25, 2013 | Honda Accord Cars & Trucks

1 Answer

Having trouble with keyless remote control on 1993 lexus es300. Replace battery on remote- still not openning doors. Help Please!


Try reporgraming it

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (Do NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.

Jan 02, 2013 | Cars & Trucks

1 Answer

How do i program keyless remote on 2004 navigator


1. Close all doors and then open drivers door and press the UNLOCK
button on drivers door panel while door is open and insert key in ignition.

2. Turn ignition from OFF to RUN 8 times within 10 seconds, with the
8th time ending in RUN. Door locks will cycle to confirm programming
mode.

3. Within 20 seconds press any button on first keyless remote.
Door locks will cycle to confirm programming.

4. Within 20 seconds, press any button on second keyless remote.
Door locks will cycle again to confirm programming.

5. Turn ignition to OFF.
Locks will again cycle to indicate end of programming mode.

Oct 13, 2012 | 2004 Lincoln Navigator

1 Answer

I have a new world dishwaser flashing e4 what is the problem


you can troubleshoot your dishwasher by
  • First check the manual to see if the machine has a specific troubleshooting guide.
  • Note all sounds or other symptoms the dishwasher shows.
  • Look for some of the more common problems. This includes water temperature deviations, poor washing, failed motor, overflows or leaks or door-latch problems, among others. Anything that can't be dealt with through your troubleshooting guide needs the use of a professional. Check for obvious causes, like blockage in any area or extremely dirty situations affecting water flow

  • you can also always troubleshoot your dishwasher by :

    Instructions Things You'll Need:
    • Dishwashing Detergent
    • Scrub Brushes
    • Steel Wool
    • Steel Wool
    • Screwdriver Sets
    1. Make sure the cord is plugged in and that the breaker hasn't tripped.
    2. Be certain that the door is completely closed and latched.
    3. Check that the cycle button is pushed in all the way.
    4. Check the sprayer arm and filter screen at the bottom. Are they obstructed by a loose piece of silverware or a plastic lid?
    5. Unscrew the cap holding the sprayer arm on; pull it and the screen beneath it out. Use a wire to poke obstructions out of the sprayer arm holes. (Don't use a toothpick because it could break off in the hole.) Scrub the screen with a scrub brush and a little bit of dishwasher detergent.
    6. Eliminate the following as sources of noise: low water pressure keeping the dishwasher from filling, dishes rattling against the sprayer arm or other dishes, loose items tumbling around or trapped in the bottom of the unit.
    7. Take apart the front door panel according to the manufacturer's instructions if the detergent dispenser isn't opening. It may be corroded or have a broken timer lever. If this is the case, rub the corrosion off with steel wool or replace the lever according to the owner's manual

    Jan 03, 2011 | 1999 Dodge Durango

    1 Answer

    Boxster power windows reset after battery replacement..cycled down and up but can't seem to get th windows to cycle down 1/2 when opening


    Open both doors,lower windows
    Shut doors,raise and lower both windows twice
    Raise both
    Check opperation, should have reset.

    Jan 08, 2010 | Porsche Boxster Cars & Trucks

    1 Answer

    A friend of mine has a Lexus 1997 ES and his remote control needs reprogramming. How do I do it for him. Thank you so much.


    1. Driver's doo opend and unlocked, all other doors closed and locked
    2. Inser Your key in ignition, don not turn, remove key
    3. using the manual lock/unlock button on ther dirvers door, slowly press lock and unlock 5 times (count the lock 5 times and unlock 5 times)
    4. Shut door
    5 Open door
    6. Using the lock/unlock button on the direvers door, slowly press and unlock 5 times (count the lock 5 times and the unlock 5 times)
    7. With the door open insert you key into the ignition, turn to ON position (don't start), wait 5 seconds. Trun off and remove key.
    8. Locks should cycle once (Car will lock and unlock once). If they don't cycle or they cycle more that once, do stips 1-7 over.
    9. Using the remote, push lock button, hold for 1 second, release. The locks should cycle once. If not start over and go slower.
    10 Close the door. Open the door. Press the lock button on the remote. The locks should cycle. Close the door. Press the lock button on the remote, the doors should lock. Press again and the doors shoud unlock.

    I got this from a site called FixYa (don't have URL). It took me a few tries but it worked like a charm.

    Sep 24, 2009 | 1997 Lexus ES 300

    1 Answer

    Step by step reset the door remote control lexus 400LS


    1. sitting in driver seat, with driver's door OPEN, press lock/unlock button ON THE DRIVERS DOOR to lock all doors, then manually unlock driver door only.
    2. Insert YOUR key in ignition, DO NOT TURN, then remove key.
    3. Using the same lock/unlock button ON THE DRIVERS DOOR, slowly press lock-unlock in 5 cycles
    4. Shut door.
    5. Open door.
    6. Using the same lock/unlock button ON THE DRIVERS DOOR, again slowly press lock-unlock in 5 cycles
    7. With the door open insert your key into the ignition, turn to 'on' position (DON'T START), wait 5 seconds. Turn off and remove key.
    8. Locks should cycle once (Car will lock and then unlock once by herself). If they don't cycle or they cycle more than once, do steps 1-7 over.
    9. Now using the remote, push lock button, hold for one second, then release the button. The locks should cycle once. If not, start over and go slower.
    10. Close the door.
    11. Open the door.
    12. Press the lock button on the remote. The locks should do a lock-unlock cycle.
    13. Close the door
    14. Press the lock button on the remote, the doors should lock.
    15. Press unlock button and the doors should unlock.

    Jun 16, 2009 | 1996 Lexus LS 400

    1 Answer

    Un work of the doors auto control lexus


    1. sitting in driver seat, with driver's door OPEN, press lock/unlock button ON THE DRIVERS DOOR to lock all doors, then manually unlock driver door only.
    2. Insert YOUR key in ignition, DO NOT TURN, then remove key.
    3. Using the same lock/unlock button ON THE DRIVERS DOOR, slowly press lock-unlock in 5 cycles
    4. Shut door.
    5. Open door.
    6. Using the same lock/unlock button ON THE DRIVERS DOOR, again slowly press lock-unlock in 5 cycles
    7. With the door open insert your key into the ignition, turn to 'on' position (DON'T START), wait 5 seconds. Turn off and remove key.
    8. Locks should cycle once (Car will lock and then unlock once by herself). If they don't cycle or they cycle more than once, do steps 1-7 over.
    9. Now using the remote, push lock button, hold for one second, then release the button. The locks should cycle once. If not, start over and go slower.
    10. Close the door.
    11. Open the door.
    12. Press the lock button on the remote. The locks should do a lock-unlock cycle.
    13. Close the door
    14. Press the lock button on the remote, the doors should lock.
    15. Press unlock button and the doors should unlock.

    Long beep to follow if successful.

    Jun 16, 2009 | 1996 Lexus LS 400

    1 Answer

    Need the steps to programme the remote


    Remote Programming Instructions

    1. Driver's door OPEN and unlocked, all other doors closed and locked.

    2. Insert YOUR key in ignition, DO NOT TURN, remove key.

    3. Using the MANUAL lock/unlock button ON THE DRIVERS DOOR, slowly press lock and unlock 5 times (count the lock 5 times and unlock 5 times).

    4. Shut door.

    5. Open door.

    6. Using the lock/unlock button ON THE DRIVERS DOOR, slowly press lock and unlock 5 times (count the lock 5 times and unlock 5 times).

    7. With the door open insert your key into the ignition, turn to on position (DON'T START), wait 5 seconds. Turn off and remove key.

    8. Locks should cycle once (Car will lock and then unlock once). If they don't cycle or they cycle more than once, do steps 1-7 over.

    9. Now using the remote, push lock button, hold for one second,
    release. The locks should cycle once. If not, start over and go slower.

    10. Close the door. Open the door. Press the lock button on the remote. The locks should cycle. Close the door. Press the lock button on the remote, the doors should lock. Press again and the doors should unlock.

    Jun 02, 2009 | 1995 Lexus LS 400

    Not finding what you are looking for?
    1998 Ford Explorer Logo

    Related Topics:

    21 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    60667 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21936 Answers

    Fordexpert

    Level 3 Expert

    5331 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...