Question about 2004 Dodge Stratus

1 Answer

2004 dodge stratus with 2.4L

Have trouble code P0340. would like some info and possibly an electrical diagram also.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 373 Answers

Hi...
The Code P0340 on your Stratus is :
Camshaft Position Sensor Loss signal.
Ok, The first step is check tha condittion on the connector.
For corrosion, bent pins or damaged wires.
If you found that everything is ok.
Replace the Cam Position Sensor.
The Cam Position Sensor, Is common that the Cam fail on this Vehicle and similars of this.
Tha Cam position sensor Is located:
At end of the engine head, driver side. Is attached with 4, 10mm
screw, and the connector at the center of the sensor.

I hope this help on your problem.
Thank you for use fixya...

Posted on Aug 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Diagram of where a camshaft sensor is on a dodge stratus 2.4L 4 cylinder


2003 model
not confirmed
crank angle sensor might be near the stater motor on the block


26233366-qzmmc3ihqjw1j4mumdlnccct-4-0.gif

26233366-qzmmc3ihqjw1j4mumdlnccct-4-2.gif

Jul 07, 2016 | Dodge Cars & Trucks

1 Answer

Can the front electric seat on a 2004 Dodge Stratus be disconnected and run manually?


no it can only be run electrically unless you get a used seat that is manual and install

Sep 19, 2014 | 2004 Dodge Stratus

1 Answer

2006 dodge stratus code p0340 was driving down the


Code 340 is for a problem with the cam sensor or circuit.

Aug 27, 2013 | 2006 Dodge Stratus

1 Answer

2004 dodge stratus code p0340 changed sensor problem still exists


Did you use an aftermarket sensor? I have seen this and replaced the "new" aftermarket sensor with a OEM and cured the problem.

Aug 25, 2011 | Dodge Stratus Cars & Trucks

1 Answer

Getting trouble code 0455. where is purge solenoid located on 2004 dodge strauts


michael_cass_519.jpgmichael_cass_520.jpgmichael_cass_521.jpgmichael_cass_522.jpgDid not know what motor size you had? So i sent info on both....

Jul 31, 2011 | 2004 Dodge Stratus

2 Answers

My 2005 stratus wont start turns over but doesnt start the trouble code is p0340 so i changed cam sensor and crank sensor still wnt start i need help so bad


2.4 L?REMOVE CAM SENSOR..CRANK ENGINE..MAKE SURE CAM IS TURNING..IF NOT..TIMING BELT IS BROKEN OR STRIPPED..NEW BELT SHOULD FIX PROBLEM..MAKE SURE YOU CHECK/REPLACE WATER PUMP/IDLER/TENSIONER

2.7L?REMOVE OIL FILL CAP AND SEE IF CHAIN IS MOVING..IF NOT..YOU HAVE COLLAPSED TENSIONER..YOU WILL HAVE SOME VALVE DAMAGE..LET ME KNOW IF TOU NEED MORE INFO

Dec 30, 2009 | 2005 Dodge Stratus

1 Answer

Electrical sistem diagram


The 2004 stratus wiring diagrams is $80

May 28, 2009 | 2004 Dodge Stratus

3 Answers

2004 Dodge Stratus MAP Sensor


Alright I think I might have the same problem. I am trying to add the photos of where the sensor is but I am not sure it is going to work. If the pics do not come through, then just look to the left of the transmission dip stick and I believe it is the on the back side of the engine. It has a red clip that is holding on the wires to the sensor and it is the left one of the two clips back there. Also before replacing the sensor check out the link below. Another person was having the same problem and fixed it without replacing the sensor. The guy helping him said that if you have bad spark plugs or wires it could trip the MAP sensor trouble code. Hope this helps.

http://www.2carpros.com/forum/2004-dodge-stratus-trouble-code-p0108-map-sensor-maybe-vt135458.html

Jan 06, 2009 | 2004 Dodge Stratus

Not finding what you are looking for?
2004 Dodge Stratus Logo

1,228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...