Question about 2003 Toyota MR2 Spyder

4 Answers

Replace antenna on 2003 mr2 spyder

I bought an OEM power antenna. What do I have to do to replace it?

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My antenna just stopped working in my MR2 2003 Spider. The motor still runs but the antenna will not go up and down. It made a weird noise and I had to pull the top of the antenna up to stop the motor from sounding loud.

Should I replace this or can you disconnect it and push the antenna up and down?

Thanks

Posted on Sep 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It sounds like the mast cable in the power unit is broken or disengaged. This cable pushes and pulls up and down the mast. You can buy the cable separate from Toyota.

Posted on Oct 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,263 Answers

The power antennea unit is located in the rear wheel tub . you should be able to see the unit once you pull back the fabric you will just need metric hand tools.

Posted on Aug 28, 2008

Don't know what you mean by fabric? The antenna is located behind the rear tire molding. By removing the rear tire and then the black liner in the wheel well you can gain full access the the antenna. I removed the power antenna and dis-assembled the housing to remove the broken plastic extender for the antenna mast. I then installed the new mast. It now works like new.

Posted on Aug 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Mr2 spyder battery replacement


Battery-- you look in your owners manual for
battery Group (size) & Rating in CCA

The Battery & Alternator-- obviously need to be
tested at a repair shop-- unless you would like to
share your expertise with us here

You never asked a question You just asked if it was
whatever ?? What is ----a no turn or no start condition!!!

Dec 03, 2012 | 2003 Toyota MR2 Spyder

1 Answer

How do I remove/replace passenger airbag and control module on 2001 MR2 Spyder?


Very careful, the first thing you need to do is remove the battery cables.

______________________
ak90 key programmer

Jun 27, 2012 | 2001 Toyota MR2 Spyder

1 Answer

2003 MR2 BROKE REAR ENGINE SHIELD,CAN I DRIVE FOR AWHILE WITHOUT IT? WHERE CAN I GET ONE CHEAP?


Which shield? Do you have a pic? If its the "Diaper" that hangs off the rear bumper, you should be ok. I took mine off when I first bought the car, has no effect whatsoever. If its a heat shield that's around the exhaust, it also has no effect, maybe a slight performance decrease due to higher engine bay temps.

Feb 17, 2011 | 2003 Toyota MR2 Spyder

2 Answers

Cruise control in my 2003 mr2 spyder suddenly went out


check the fuse for the cruise control from the driver side located on the left side of the dashborad. Make sure the fuse is not blown out.
If it bad, change it out but make sure it is the same rated fuse.

Good luck

Jul 09, 2010 | 2003 Toyota MR2 Spyder

3 Answers

Mr2 transmission


use only OEM Toyota trans fluid. If there is one lesson I learned with my MR2, its that Toyotas own trans fluid is the best. Yes, its a few dollars more, use it anyway.

As for your top, there is a product called Amazing Roll off. Its for boat canvases and its simply the best thing i've ever used. try it, you wont be disappointed.

Jun 19, 2009 | 2003 Toyota MR2 Spyder

1 Answer

MR2 after 2 mins of starting the smt light comes on.


it sounds like the clutch actuator is worn out.
The clutch actuator has 2 parts:
1. the clutch master cylinder
2. the clutch slave cylinder.

Try to replace the slave cylinder first, and if it is still not solving the problem, then try to replace the clutch master cylinder

Good Luck

Feb 06, 2009 | 2003 Toyota MR2 Spyder

2 Answers

Cannot engage in Reverse


Sorry, i dont think its rain-related, the gearboxes are "Poor" from the factory, i hope you got some kind of warranty;(
http://www.yorksoft.co.uk/mr2/index.asp?selection=viewprob&problemview=Gearbox

Nov 07, 2008 | 2003 Toyota MR2 Spyder

1 Answer

How to replace headlight bulbs on 2003 MR2


Each bulb is individual. No need to replace the assembly.

Sep 28, 2008 | 2003 Toyota MR2 Spyder

2 Answers

2003 MR2 will not idle


Possible throttle control motor failure. Possible Idle Air Control Valve failure.
Is the "Check Engine" light on? Hard to determine without more info. Sorry.

Sep 14, 2008 | 2003 Toyota MR2 Spyder

Not finding what you are looking for?
2003 Toyota MR2 Spyder Logo

2,863 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...