Question about 1990 Geo Prizm

1 Answer

1990 geo Prizm fuse location for the heater blower

I can't find the fuse for the heater blower. Dose anyone know where it is located?

Posted by on

  • yadayada
    yadayada May 11, 2010

    Have you checked the engine compartment near the fan relay.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

The heater blower motor is run through two fuses. the gauge fuse in fuse block 1 and the ac fuse in fuse block 4.

Posted on Oct 07, 2008

  • Champ Patterson
    Champ Patterson Feb 14, 2015

    what amp size for 1993 geo prism

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the ignition switch/relay located on a 1990 geo prizm?


the key switch is under the key , in the column center.
all relays are in the fuse boxes. front and cab .
post symptoms, we can help lacking that.
we could show photos all day of switches, relays, and fuses, but why?

Apr 09, 2015 | 1990 Geo Prizm

2 Answers

Where is the location of the speed relay for blower motor on a 1990 geo prizm


Not a relay but a resistor pack, and it should be mounted in the heater case, close to the blower motor-follow the wires from the blower motor back to the resistor pack. Unplug the connector and remove the screws holding the pack to the case, to remove and replace.

Mar 22, 2013 | 1990 Geo Prizm

1 Answer

My 1990 geo prizm brake light comes on when I start to stop and turns off when I stop


You need to replace the brake light switch, it is located above the brake pedal and is actuated by the brake pedal arm.

Jun 12, 2012 | 1990 Geo Prizm

2 Answers

Where is the brake switch located on a 1990 geo prizm?


Brake Light Switch The brake light switch is located at the top of the pedal arm. It is the switch which turns the brake lights on when the brakes are applied. The plunger type switch is held in the off position by the normal position of the brake pedal; when the pedal moves during brake application, the switch plunger moves forward and the brake lights are brought on. The switch is almost always the first place to look for the cause of the brake lights flickering over bumps or staying on without use of the brakes. If the brake lights fail to work with the brakes applied, check the fuse first and then check the switch.

Oct 27, 2010 | 1990 Geo Prizm

1 Answer

1994 geo prism, fuse blew, I don't have manual


the only fuse for the starter is not located in the fuse box it is located in the positive wires that go to the starter its called a fusible link and when then amperage of the starter exceeds the fusible link rating the fusible link blows the link is usually located inthe positive wire to the starter and at some point fatter then the wire itself

May 04, 2010 | 1990 Geo Prizm

1 Answer

How do you change a heater blower motor in a 1990 geo prism and do you have pictures of it?


Go to kragen.com to find the replacement part. It will show a picture. It is usually located behind the glovebox and the heads of the bolts that hold it in are looking right down at the floorboard. In other words it is easy to get to. Don't forget to have the ignition switched off and disconnect the blower power wires before you remove it. You don't want to damage the connector. Best of luck!

Jan 31, 2010 | 1990 Geo Prizm

1 Answer

Fans dont come on. Where is the fuse box located? on a 1990 Geo Prizm


There are 2 fuse boxes on a Geo Prizm. One is located in the interior of the car, on the drivers side, on the side of the dash, near the door. The other is located on the drivers side underneath the hood.

Oct 05, 2009 | 1990 Geo Prizm

3 Answers

Location of fuel pump relay on a 1990 Geo Prizm


under the hood in a fusebox near the firewall

Sep 10, 2009 | 1990 Geo Prizm

2 Answers

Blower motor location 1990 geo prizm


In my 1992 it is underneath the dash on the passenger's side, but you have to take the whole front panel including the glove box off to access it. When that is done there is a rectangular housing and a more circular housing. On the bottom of the circular housing there are three screws that hold the blower motor up. Remove the screws and it will drop right out.

Dec 14, 2008 | 1990 Geo Prizm

2 Answers

Location of fuel filter-1990 Geo Prism


Right under the master brake cylinder, its really hard to replace it. It has 2 screws, one bolt on top and the bottom one needs to be screwed off under the car

Aug 06, 2008 | 1990 Geo Prizm

Not finding what you are looking for?
1990 Geo Prizm Logo

Related Topics:

1,245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...