Question about Jeep Grand Cherokee

1 Answer

Have a 2001 jeep cherokee just put a cam senor in but still not starting can the crank senor be bad to or could i got the shaft that the senor sit on moved

Posted by on

  • 1 more comment 
  • Anonymous Mar 28, 2009

    my car will not crank, battery working, new starter

  • Anonymous Apr 08, 2009

    Sounds like my problem. Are you saying that the starter will not turn the engine? Or, is the starter turning the engine but the engine will not start? We've have cronic problem of starter not turning engine.

  • Anonymous May 23, 2009

    engine cranks, but does not fire.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 63,481 Answers

The crank sensor is a well known cause of no spark condition, it is most likely the real problem, the crankshaft sensor for a Jeep 2001 is located behind the starter, you have to remove the starter to gain access, even then it is hard to get at.

Posted on Aug 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a 2002 Jeep Cherokee. Where is the oxygen sensor bank 2 sensor 2 located. This jeep has 4 oxygen sensors. Thanks


the bank 1 and 2 refer to what side of the car ir is on. Bank 1 is passenger side bank 2 is drivers side sensor 1 and 2 refer to before and after the catalytic. sensor 1 is before and 2 is after . i hope this helps and just a references if your cam shaft sensor and crank shaft sensor have not gone bad yet i would have them checked. usually these go bad really quick on jeeps. just had to replace both my cam and crank sensors and with out labor it cost around 100 with labor about 150 to 200. and the o2 sensors run anywhere from about 50 to 150 depends on the quality you want

Nov 03, 2010 | 2002 Jeep Grand Cherokee

2 Answers

The power is on and off so starting is hard


Need to try the crank shaft position senor. It work off the turning of the crank. It the sensor goes bad then the engine has no idea what position the crank is in, so therefore you won't get it to start. I had to replace a few of these on Jeeps , this is a big problem for Jeeps.

Jul 05, 2010 | 1996 Jeep Grand Cherokee

2 Answers

2001 jeep cherokee cranks but wont start and has


If all the fuses are good,replace the crank shaft sensor,this is the problem.

Jan 04, 2010 | 2001 Jeep Cherokee

1 Answer

1996 Jeep Cherokee. Random occurence cranks but no start.


there is also a cam sensor and throttle position sensor, any codes, fuel npump can test ok but jeeps are noted to have the fuel tank sock come off in the tank and the fuel pumps can have intermittent starting problems. I hope thiis helps

Sep 16, 2009 | 1996 Jeep Grand Cherokee

2 Answers

93' Grand Cherokee, dont start, no spark,no gas preassure


my 1996 jeep grand cherokee lmtd. won't start did tune up. cranks but no fire. please help. engine code 54 shows up . cam shaft positioning no signal. . tested all circuit. changed cam shaft positioning sensor twice.still cranks did start once ran for 5 min. changed the sensor again. no luck. help please. keith

Sep 10, 2009 | 1993 Jeep Grand Cherokee

1 Answer

My 1996 Jeep Cherokee does not get spark even with a new coil


crank shaft senor dead ..driver side around the bell housing ..very small ..50 to 100 $

Jul 18, 2009 | 1996 Jeep Cherokee

3 Answers

1996 jeep grand chrokee turns over will not start, replaced cam shaft censor and ECM, and coil. distibuter cap looks bad has some white dust inside and contacts burnt. could it be that?


If you did not replace the CRANK sensor on the back side of the motor this most likely is the problem and a very common one at that.this controls spark and injector pulse,unlike the cam sensor which just shows when #1 cilyder is up.

Jul 03, 2009 | 1996 Jeep Grand Cherokee

2 Answers

2002 Jeep Grand Cherokee Lardo misfiring


You say you changed the cam sensor. A1391 code is a crank sensor on the top of the trans. bell housing.

Feb 22, 2009 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...