At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
how much is the replacement for the silinoidshow much is the replacement for the silinoids
AnonymousOct 15, 2008
i change the transmicion fluid and the truck is stock on hi speed and check engine tun on what sombody recomend to do [email protected]i change the transmicion fluid and the truck is stock on hi speed and check engine tun on what sombody recomend to do [email protected]
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
look on the left side of transmission a round cover .then remove it with a screwdriver or else then pull on governor control there is a small plastic gear it is worn like a eaten apple.
hope it helps
If you have a push button you may have broken the vacum line that controls the transfer case. It is on top so hard to get to but a cheep fix. If you have a floor shift when you were stuck you may have a damaged the linkage. The linkage can be adjusfed to shift in gear. You may need to get new linkage.
if it is stuck in low gear suspect a speed sensor issue.If it is stuck in a higher gear such as 2nd or 3rd you will need to retrieve codes from the trans computer to diagnose.
The main problem - stuck in low gear indicates that the shift solenoid may have gone out. In that case it must be replaced. This happens to all these vans eventually. BUT, you might try checking the transmission fluid level just to make sure it is not too low.
Your no going too fast for sure. This gear is designed to crawl...also known as a granny gear. You should never have to use this LOW gear, unless your climbing a steep hill, or severly stuck is sugar sand.
Could be your shift cable adjustment. In the engine compartment move the shift cable forward ( you can do this by hand) This will move the transmission out of low gear and into park. You will probably find you can now shift into the other gears without problem but if you go into low it will stick again. You might be able to adjust it or you might have to replace the cable.
how much is the replacement for the silinoids
i change the transmicion fluid and the truck is stock on hi speed and check engine tun on what sombody recomend to do [email protected]
×