Question about Ford Mustang

1 Answer

I have a 92 mustang gt and my proble is that when the engine is cold it pops and when you put it on drive it lacks of power and pops everywhere but untill it gets hot then or its been runing for it runs a little better but then when you turn it off and wait for an hour or so it does it agian can youy help me thank you.

Posted by on

  • 1 more comment 
  • daniel alric
    daniel alric Aug 28, 2008

    when i mean popping it is backfiring through the throttle body

    and yes the engine is factory and the mods is 24 lb injectors, mass air, and high flow fuel pump.

    i ve done head jobs, timing gear and chain, distributors job and still nothing

  • daniel alric
    daniel alric Aug 28, 2008

    oh yeah and i deleted the smog pump the whole thing

  • Anonymous Jan 05, 2009

    Same problem with an'07 Taurus with 35k miles.



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

By popping what do you mean? is the motor factory? has any thing been done to the engine?

Posted on Aug 28, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

92 Ford Mustang 4 cylinder sluggish

who puts a 4 cyl in a mustang??? 4 cyl cant push that kind of weight,i have a briggs and stratton motor that might work better

Jul 25, 2015 | Ford Cars & Trucks

1 Answer

2001 mustang gt running rich no check engiine light. backfiring and popping cranks and idles good until engine warms up

Begin with Scanning & Checking parameters....Best to begin with a 'stone cold' engine.

Feb 28, 2014 | 2001 Ford Mustang GT

1 Answer

While driving my 92 camry, there was a pop under the hood and motor oil everywhere. What happened?

Are you sure it is motor oil? Typically a "pop" followed by massive amounts of oil means that a power steering pressure hose has ruptured. Did you lose your power steering at the time? Otherwise you may have broken a connecting rod and rammed it through the engine block. Of course then the car is totally undriveable. Would need more details to make a better guess as to the issue.

Nov 07, 2013 | Cars & Trucks

1 Answer

2000 ford mustang gt Turn on key and no power, no

if its a handchiffted gearbox put in highest gear.
puch the car to the front and back till you hear a click.
if he starts .check the ignition.if this is not correct the car have a death spot.

Oct 18, 2013 | 2000 Ford Mustang

1 Answer

I have a 92 mustang lx 2.3 and it won't start. There is no fire at the plugs, and I can't hear the fuel pump kick on. The reset on the fuel pump is not popped out, so it is good. Any help woul

I would check the EEC relay and the fuel pump relay for power and ground signals first. Both circuits are controlled by the ignition key switch. The fuel pump should be powered for 3 seconds when you turn the key on.

Sep 29, 2012 | 1992 Ford Mustang

1 Answer

How do i fix the drive cycle to get my 2000 mustang inspected

depending on the code that was cleared
you may have to complete 2 trip cycles to run all monitors
engine cold

Aug 27, 2010 | 2001 Ford Mustang

1 Answer

I had the engine and transmission taken out of my running and driving but rotted out 1992 Mustang lx 5.0 and put into the rust free body of a 93 Mustang gt body. The fuel pump will not stay running unless...

Here are some screenshots of the switch and install/replacement/adjustment procedure. NOTE: there are two recall notices from Ford to replace this switch. It can catch on fire! Recall Numbers are: 95S28 and 96V071000. Call Ford - see if they will replace it for you at no cost. Here's the data...

If you find this solution to be helpful, then please take a moment to rate this post. - Thanks.

Jun 21, 2010 | 1993 Ford Mustang

2 Answers

My 96 Mustang GT engine will idle fine in park or

it sounds like either the torque converter solenoid is stuck or the torque converter itself is bad

Sep 10, 2009 | 1996 Ford Mustang

1 Answer

Lack of power

These engines are pretty sensitive to the spark plug gap. Try replacing the plugs and making sure the gap is correct (even if they're pre-gapped. They're typically 0.055", but there should be a sticker under the hood that states the actual gap.

Jun 07, 2009 | 1995 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5648 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides