Question about 1991 Oldsmobile Cutlass Supreme

1 Answer

1991 oldsmobile cutlass supreme

No start.will crank has spark.has fuel pressure.but no injector pulse.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 142 Answers

Check for fuses/power/ground to the engine computer (or injector drive computer) whatever the case is.

Spark, fuel pump, and starter all are independant of the fuel injection computer.

Either the computer itself has gone bad, or it is not receiving power or ground, or wiring to the injectors might be bad...

Posted on Aug 28, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Got a 2005 Nissan Altima it run for a bit can come up to a stop sign it will just die take 20 min before it will start again

well you need to identify what is missing. An engine needs ignition spark, fuel and injector pulse to start. (assuming mechanically the engine is ok. Like good compression and cam timing ok) A fuel pressure test is needed to see if it has good fuel pressure. Test for spark and injector pulse. If the fuel pressure is ok but it doesn't have spark or pulse it is usually and crank position sensor but on Nissans it could also be a faulty cam position sensor. Without the proper test equipment you will need to have a qualified mechanic diagnose it for you. I wouldn't start throwing parts at it.

Dec 24, 2017 | Nissan Altima Cars & Trucks

1 Answer

Why won't my car start. It cranks over but won't fire up. It's getting fuel.

Hi you need to check for fuel pressure and volume then injector pulse . check for spark , check timing and compression.
If you dont find injector pulse or spark , suspect your cam and crank shaft position sensor.
Hope this helps a bit ,
kind regards Faldih Higgins

Jan 22, 2016 | 2001 Chrysler Sebring

1 Answer

I have no injector impluse

no injector pulse -
Nov 21, 2010 - no injector pulse 2nd Gen Ram Tech. ... but was running and driving fine before. as far as i can tell i have no injector pulse. tested with a noid ... No spark AND no fuel injector pulse ONLY when van is cold ...
Nov 18, 2013
2000 ram 1500 Has spark but no injector pulse wont start ...
Jun 25, 2013
v10 RAM no start....frustrated
Sep 19, 2011
help - no spark, no injector pulse, no run
Oct 30, 2009
More results from

No injector pulse 02 Ram 1500 - DodgeTalk : Dodge Car Forums ... > ... > 3G Dodge RAM - General Talk
May 30, 2012 - No injector pulse 02 Ram 1500 3G Dodge RAM - General Talk

Oct 23, 2015 | Dodge Cars & Trucks

1 Answer

Jaguar xj sport 3.2 no spark or injector pulse

If ECU has crank signal and engine turns over, ECU should give injectors a pulse and trigger the ignition. If not ECU might be bad. You should check power and grounds going to ECU. There are usually multiple power and grounds going into ECU

Jan 06, 2014 | Cars & Trucks

1 Answer

No injector pulse on 94 grand am 2.3dohc

Fuel pump relay may be weak. Try removing the connector from the oil pressure switch and connecting the terminals together so as to bypass the switch.
if this works, replace the relay.


Jan 10, 2018 | Pontiac Grand Am Cars & Trucks

1 Answer

90 oldsmobile cutlass ciera will crank, has spark, has fuel....... not sure of pressure.

Are you sure you have fuel entering the combustion chamber? fuel pressure in the rail doesnt mean the injectors are pulsing. Get a noid light and hook it up to an injector and crank it. See if it strobes. If not,
may have lost the cam sensor or driver in the ecm

Jul 07, 2012 | Oldsmobile Cutlass Ciera Cars & Trucks

1 Answer

No injector pulse

what vehicle? injector pulse controlled by computer. the computer recieves a pulse from crank angle sensor, or distributor pick up, etc.
then controls injector pulse. Mass air flow on some vehicles determines spray pattern

Jun 29, 2012 | 1991 Chevrolet Cavalier

1 Answer

I have a 95 oldsmobile 3.1 v6 that i just replaced fuel filter and pump but now wont start its getting fuel at the rail bleader

Was it dead before you replaced the pump? If so then check for spark. Just because the pump is new and you are getting fuel to the rail doesn't mean it's at the correct pressure. Check the pressure and also check for injector pulse at the injector harness connector. You can do this with a "noid light" (Harbour Frieght under $10). Let me know what you find.

Sep 02, 2011 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Wont start no fuel injector pulse

of so you have spark and fuel pressure, next check for a constant 12 volts to injectors, pulse is controlled by ground, if you have voltage check wiring to ecm

Nov 19, 2010 | 1989 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1991 Oldsmobile Cutlass Supreme Logo

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides