There have been many repairs to the gear shift indicator on our 92 Lincoln but it always breaks again usually with a few weeks and always within a few months. It was several years old when this started.
Its the Prindle and it needs to be set in Neutral like middle the white nob then put back in Park then run the gears see to see if they line up . hope this can help.Need to drop steering to put new one in
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If I'm correct-- you asked yesterday & a woman gave you
a great answer about the hold feature on the dash
Now I will tell you that all along -- I felt you had a transmission
problem & most likely an internal one & a very very costly repair
All anyone can do on this site is guess at these questions
You I assume have continued to use the vehicle & may very well
have ruined not only the trans, but any chance for a simple less
expensive repair (I did once own a trans shop) Very Very few
do not come out & get rebuilt, once they act up & continue to drive it
This is a common concern on explorer, shift indicator cable breaks.if you're the diy type this is a pretty easy repair. Remove steering column cover top and bottom, and instrument bezel.you'll see shifter indicator coming out of bottom of instrument cluster and cable wrapped around steering column, attached to the shifter.you'll have to remove 4 screws for cluster,7mm, tilt the bottom of the cluster and look where indicator is attached, usually 2 7 mm bolts or clips, remove and replace indicator...if the steering column was lowered without taking off indicator cable it would break cable, or could be band that wraps around column that's loose or broken..either way cheap fix..