Hello, I recently purchased a 1998 Ford Ranger. It came with the box liner installed but they said the hard tonneau cover would not fit with the box liner. So I'm about to remove the box liner. Here's the problem. The hard tonneaucover didn't come with installation instructions. Is it rocket science or something simple?
Thanks for your help,
I guess I should have checked it out before posting this. It was easy. It was just a matter of clamping the rails to the sides and front of the box, sliding the cover into the 2 slots in the front, and voila!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The ball on the Shifter that mounts on the TOP of the transmission is worn and needs to be replaced in order to get the Complete throw (Movement) of the shifter. It is an easy repair, 8 screws to take the cover off, 4 bolts on the cover and then pull up the shifter and replace the ball
Disconnect heater hoses. Remove glove box. Remove cover fro heater core (8mm screws) . Remove parts in way of cover. Replace heater core. reassemble. I would recommend flushing system first. Top off coolant.
there is a control box for the cruise control behind the glove box . You can remove the cover by pushing in from both sides of the glove box door . the control box will be just inside the glove box to the top. it simply unplugs. any junk yard with an aerostar or ranger or explorer will have one of these control boxes fairly cheap. these control boxes are commonly known to just quit workingand are a very easy fix.
one side of mine wouldnt unlock i sprayed it with like a wd40 then if still wouldnt come off i removed it from the top and let the bar hang inside the truck then took a pair of pliers and gently pulled up on the release and without the cover bein still attached it had no pressure and came off a little easier