Well, for one you not suppose to put a baby seat in the front of the car. But anyways with an older airbag control system like that you cannot just disable one airbag, if you unplug the passenger side airbag then in an accident neither airbags will deploy.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You don't have that smart stuff for weight. You can't turn it off. If you don't think they should be in front, because of age or height. Put them in back. I haven't seen a van yet that had this option.
CANT DISABLE AIRBAGS NEED TO HAVE AIRBAGS CODE SCAN AND FIX THE PROBLEM.AIRBAGS IS A SAFETY FEATURE WITH CAR LIKE SEAT BELTS.YOU CANT REMOVE EITHER IF YOU DO YOU WILL FAIL STATE INSPECTION.THEY WONT PASS STATE INSPECTION IF CAR MISSING SAFETY FEATURES OR AIRBAGS AND SEAT BELTS DONT WORK YOU WILL FAIL STATE INSPECTION.
CANT DISABLE SAFETY FEATURE. SEAT BELT CIRCUIT PART OF THE AIRBAGS SYSTEM. SEAT BELT HELP TRIGGER SIDE AIRBAGS AND AIRBAGS IN STEERING WHEEL.ON VECHICLE CRASH IMPACT.NEED TO LET DEALERSHIP REPLACE WORK ON FRONT SEAT.IF YOU WORK ON VECHICLE MOVE AROUND THE SEAT BELT RETRACTER COULD SET OFF THE AIRBAGS.AIRBAGS DANGEROUS LET QUALIFIED TECHNICIANS DO THE FIX.
The airbag system in this car is second generation smart airbags, there is no switch, if the weight in the passenger seat is not at least 50 pounds (there is a sensor in the seat cushion) the airbag is switched off to the paassenger seat, but small children should always be in a approved child seat in the back seat anyway.
My 1994 F-150 doesn't have a passenger side airbag, and if the 1995 Ranger does have passenger airbags, it would not have a way to disable the passenger airbag until later models (after a bunch of kids got hurt by the airbags deploying). If I recall correctly that wasn't added until somewhere between 1999 and 2001.
Hello, The only way to disarm is to disarm both. I will state that this is illigal in most states if not all of them to disarm your airbags. To disarm them just pull out the fuses that are labeled for the airbags. This is the easiest way to disarm, plus not noticeable if it is illigal in your state.
This is either a problem with one or both of your airbags or the airbag connector located at the back of the glovebox has been disconnected for some reason. (ie. to prevent airbag opening when installing baby seat) (1999 miata does not have a baby seat airbag disabling sensor).
You should get your car inspected at your local mazda service to check if this is a wiring (plug disconnected) issue or one of your airbags is malfunctioning and needs to be replaced.
Flashing airbag light could indicate that either one of the airbags or both have a problem. Disconnecting the passenger's airbag has the same effect.
Warning! Do NOT attempt to do any kind of airbag/airbag wiring related repair yourself. Airbag problems should be addressed ONLY by certified technicians at your local Mazda service. (Airbag fixing requires for example that the car battery is disconnected, you MUST NOT attempt anything with the car battery connected).