Question about 2005 Pontiac GTO

1 Answer

2005 PONTIAC GTO gas pedal electrical plug

Have a 2005 Pontiac GTO with the drive by wire gas pedal. There is a six wire plug that plugs into it. That plug got the wires ripped out of it. I need to know what order the wires were in originally in that plug. There is a red, lt. blue, dk. blue, violet, black and orange. This plug is arranged with the wires in a long, narrow oblong plug with the wires side by side. Any one can help?

Posted by on

  • restorethem Aug 28, 2008

    Thanks for the help. You are right on as far as what the GTO connector should be. We have, since posting, found out we did not get a 2005 GTO engine/trans/loom combo we purchased but a Corvette LS2 combo. The connector at the drive by wire gas pedal and the wire color is different than the GTO. We now have the info we needed. Again, thanks for your time and help!



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

2005 PONTIAC GTO gas pedal electrical plug - 1549179.gif
Connector Part Information
• 7223-9730-30 • 10-Way F (GY) Pin
Wire Color
Circuit No.
Reference Low Signal
5-Volt Reference Signal
Throttle Pedal Position Signal
Not Used
Throttle Pedal Position Signal
5-Volt Reference Signal
Reference Low Signal
Not Used

Hope that helps, Good Luck

Posted on Aug 27, 2008

  • Jeremy Elenbaas
    Jeremy Elenbaas Aug 27, 2008

    Sorry, thats didn't work out right, the wires go as follows.

    With the open end of the plug facing you the terminals run from right to left (1 to5) and 6 is on the bottom row right.



    3.Light Blue

    4.NOT USED




    8-10.NOT USED



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My check engine light engine light came on. And I got it check it says throttle/ pedal position sensor/switch E Circuit 08 Pontiac grand prix 3800 series

It's a sensor/switch down on gas pedal. Go to dealer order one it's artached by two bolts and an electrical plug

Mar 04, 2015 | Pontiac Cars & Trucks

1 Answer

2005 pontiac grand prix gtp flashing engine code slugish

I actually have the same car, and when mine did that it ended up being a cracked spark plug. So I changed the plug and it cracked again. Ended up needing new spark plug wires.

Apr 03, 2014 | 2005 Pontiac Grand Prix

1 Answer

How to trun service vehicel soon light on a 2004 pontiac gto

turn on the key without starting it, then press the gas pedal to the floor 3 times and it should reset. If not see owners manual

Dec 30, 2013 | 2004 Pontiac GTO

1 Answer

2005 pontiac GTO - Oil change light came on. I change the oil and filter, it took almost seven Quarts. Drain it by jacking up the left side, right side and back of car. I then tried to reset the the change...

no need to fear, this is a common problem. all you need to do is turn the key to the on position, push the pedal three times, then turn key to the off lock position. this is a typo in the manual. not sure why they have not corrected this issue. hope this helps.

Apr 07, 2011 | 2005 Pontiac GTO

1 Answer

I have a set of seat from a 05 GTO I put in a 67 GTO, I cant make the seats move electricly hwats the fix.

If the seat controls are located on the seat itself, just hooking up the proper positive and negative power wires to the seat electrical wires should be good enough to get them moving.

Oct 11, 2010 | 2004 Pontiac GTO

1 Answer

I have a 2005 GTO and the brake light remains illuminated. I replaced the bulb and the problem remains. Fuses are all good. What could be causing the brake light to remain on?

Probably just a fault - get a maintenance check they'll plug a little box into your car and it will come up with the exact problem.

Aug 10, 2010 | 2005 Pontiac GTO

2 Answers

2004 Pontiac GTO 2004

You will need what is called an oil vacuum pump. They are not very expensive (around $20-$30 US) & are usually available at your local auto parts outlet. They are basically an oversized syringe with a flexible rubber or plastic tube instead of a solid steel probe & will usually hold about a metric litre. Hand operated. Use this to withdraw as much oil as you can from the Diff, it is impossible to get every drop. You will also find it handy to refill the diff, but flush it out first with kero or diesel. I also recommend draining all you can in one step, then waiting 1/2 an hour to 45mins and doing it again to get the last bit.

Dec 07, 2009 | 2004 Pontiac GTO

3 Answers


Jul 25, 2009 | 2005 Pontiac GTO

1 Answer

Wiring problem

Bro, in your address bar (google, bing, etc) just type in your vehicle specifics with wiring diagram at the end and you will get wiring diagrams for your Vette. Sounds like a nice project too. I'm always doing that stuff, and I use google, because google is your friend.

Oct 22, 2017 | 2005 Pontiac GTO

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

557 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides