Question about 2002 Dodge Neon

1 Answer

"!" in red flashes twice when taking off after stop.

This sybol in red flashes twice after stopping at a red light. this symbol is on the left side of the gauges. what could be the problem.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 123 Answers

It is a braking issue. Either you are low on brake fluid (indicating a leak in the system) or the E-brake is partially on. If neither of these are the case, the pop the hood and disconnect the wire running into the brake master cylinder resevoir. If this solves the issue and it is full of fluid, then that sending unit should be replaced as soon as possible.

Posted on Sep 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

52 plate vivaro engine turns but wont start stop light on and flashing engine symbol


not an easy fix
cranks but no start

flashing engine symbol
fault codes to be read from the ECU

stop light on .... abs or speed sensors

if cranking over and no start
fuel pump working
could be anything electronic
going to need to get the codes for a faster repair





26348905-jfdcmvlj5rzsmryesp3qoigc-5-0.jpg

Nov 10, 2016 | Cars & Trucks

1 Answer

Can anyone help van would not start then went fast but the red STOP symbol was on then another red symbol came on any suggestions wondering if gonna cost me a fortune


The Red stop symbol indicates defective brakes!! Could be just low on brake fluid...most red lights indicate :Do not drive unless emergency until checked...Sorry, but you need immediate help with this...

Apr 07, 2015 | Cars & Trucks

1 Answer

What does the red car on dashboard mean?


What does your manual say, it will inform you as to the symbol and what a flashing or steady light means etc. Also to be on the safe side it would be in your best interest to also include the make and model of your car for a better answer.

Jul 21, 2014 | Toyota RunX Cars & Trucks

1 Answer

2000 stratus beeps twice, flashes twice, repeats untill stopped, but it drives


This is usually a good situation to bring to alarm shop and have them take it out and see if you can just keep the remote start or it might need a new brain on the alarm system

Dec 10, 2013 | 2002 Dodge Ram 3500 Truck

1 Answer

Hello I have a 1994 maxima manual transmision,it have a check engine light on,when I start the car and beguin to drive it,runs perfect the a few minutes later the car gets very lazy almost want to turn...


Hello! I'll need the trouble code to fix your vehicle...Below is procedure with a code list...Guru...saailer

Remove the trim panels in front of the center console. Locate the engine computer attached to a floor-mounted bracket on the transmission tunnel between the console and the firewall.

  • Turn the diagnostic mode selector, located in a round opening on the side of the engine computer, until it stops. Observe the small red and green LED lights on the side of the computer next to the mode selector. They will flash to indicate the modes, with a pause between each mode. One quick flash is mode one, two quick flashes is mode two and so on. When the light flashes indicate mode three, quickly turn the mode selector counterclockwise until it stops. You have entered mode three diagnostics.

  • Remove the trim panels in front of the center console. Locate the engine computer attached to a floor-mounted bracket on the transmission tunnel between the console and the firewall.

  • Turn the diagnostic mode selector, located in a round opening on the side of the engine computer, until it stops. Observe the small red and green LED lights on the side of the computer next to the mode selector. They will flash to indicate the modes, with a pause between each mode. One quick flash is mode one, two quick flashes is mode two and so on. When the light flashes indicate mode three, quickly turn the mode selector counterclockwise until it stops. You have entered mode three diagnostics.
  • Turn the diagnostic mode selector, located in a round opening on the side of the engine computer, until it stops. Observe the small red and green LED lights on the side of the computer next to the mode selector. They will flash to indicate the modes, with a pause between each mode. One quick flash is mode one, two quick flashes is mode two and so on. When the light flashes indicate mode three, quickly turn the mode selector counterclockwise until it stops. You have entered mode three diagnostics.Observe the red and green LED lights on the side of the computer. The red light flashes to indicate the "Tens" digit of the code and the green light flashes to indicate the "Ones" digit of the code. For example, if the red light flashes two times and the green light flashes seven times, this would indicate code 27.


    Turn the ignition key off for two minutes to exit diagnostics. The computer will automatically return to mode one for normal operation...

    Code 11 Crank sensor angle

    Code 12 Mass airflow sensor

    Code 13 Engine coolant temperature sensor

    Code 14 Vehicle speed sensor

    Code 21 No ignition reference

    Code 22 Fuel pump

    Code 31 Engine control unit

    Code 32 EGR sensor

    Code 33 Oxygen sensor

    Code 34 Knock sensor

    Code 35 EGR temperature sensor

    Code 43 Throttle position sensor

    Code 45 Injector leak

    Code 51 Injector circuit

    Code 54 Automatic transmission signal

    Code 55 No malfunction recorded

    May 04, 2012 | 1994 Nissan Maxima

    1 Answer

    How to turn change oil light


    iI you mean 'how to turn change oil light off" go to fuse panel. Open drivers door there is a panel cover on the side of dash board, remove cover there is a red RESET button that resets oil pressure and tire pressure. Turn the ignition key to the on position but don't start the car. Now press and release the reset button the change oil light should start to flash, now press and hold the reset button until you hear chimming hold until chimming stops then release, the change oil light should go off. If you need to reset tire pressure press reset button twice, the first push will make the change oil light flash the second press will make the tire pressure light flash then hold untill chimming stops, light should go out . Hope this helps.

    Sep 30, 2010 | 2000 Pontiac Grand Am GT

    2 Answers

    My daughter has a 206 and the left side indicators have stopped working while the dashboard indicator flashes twice the speed. Any ideas?


    The turn signal bulbs are bad, and yes probably both. To Test, swap bulbs from the right indicators to the left

    Oct 13, 2009 | 2005 Peugeot 405

    1 Answer

    Dashboard light flashes small red car on left hand side but it doesn't stay on long enough.what is that


    this is the factory alarm indicator light. try locking the doors while your in the car and wait a few minutes. Unlock the door and open it and the horn should start to beep. Put your key in the driver's door and turn twice to unlock all the doors and stop the alarm.

    Apr 21, 2009 | 2001 Dodge Intrepid

    1 Answer

    Flashing red light


    that must to be an aftermarket alarm system than was installed for an alarm place just take the car to an alarm plce ask if it does have one and have it remove

    May 27, 2008 | 1992 Ford Probe

    Not finding what you are looking for?
    2002 Dodge Neon Logo

    75 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    71525 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22059 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7029 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...